Barrier films, used in everything from food and drug packaging to consumer electronics and solar cells, help prevent your food from spoiling, help to preserve medication, and protect your electronics from damage due to exposure to air or a splash of water. Now a group of researchers in Georgia have developed a new way to produce better films using atomic layer deposition.
These are not the flimsy films of plastic that may seal a package of cookies. High-end barrier films that safeguard your phone's high-tech organic light-emitting diode (OLED) display from every whiff of oxygen or molecule of water vapor require higher performance transparent materials such as metal oxides.
Existing methods for manufacturing these high-performance barriers aren't perfect. Due to the way they're made, they often have small defects, resulting in tiny holes that let in water or oxygen. That's why Samuel Graham and his colleagues at the Georgia Institute of Technology have been exploring how to use atomic layer deposition to produce better barrier films. At the AVS 60th International Symposium and Exhibition, held in Long Beach, Calif. Oct. 27 – Nov. 1, Graham will discuss some of the latest developments in this effort.
Graham and his colleagues have created new barrier films that can protect electronics in very harsh environments – when submerged in salt water for months, for example.
"By creating such barrier films, we are able to extend the lifetime and reliability of electronic devices," Graham said. The new coatings can be used for electronics such as implantable biomedical devices, light-emitting diodes (LED) used in solid-state lighting and displays, solar cells, and organic electrochromic windows, which go from opaque to clear when a voltage is applied. Barrier films will play a large role in the development of many future electronic devices made with organic materials, Graham added.
How Atomic Layer Deposition Works
High-performance barrier films are usually made with techniques such as sputter deposition or plasma-enhanced chemical vapor deposition. In these methods, material is either “sprayed” onto a substrate or grown from a plasma, creating a thin layer that becomes the film. Although efficient and common in industry, these techniques often result in defects, requiring multiple coatings to create good barrier films.
With atomic layer deposition, the researchers have precise control down to the molecular level, allowing them to make thin, even films that have minimal defects. In this process, the researchers surround a substrate with a gas containing a particular metal atom like aluminum. The molecules of the gas attach themselves onto the substrate, forming a single layer of atoms. Next, excess gas is removed from the chamber and another gas is introduced that then oxidizes the metal, creating a metal oxide that's impervious to air or water. The process is repeated to reach the desired thickness, which is only about 10 nanometers. In contrast, films made with more conventional techniques are tens to hundreds of times thicker.
Companies are already developing and selling atomic layer deposition technology, Graham says. But for wide-scale commercial use, more work needs to be done to improve the technology, how fast the materials are deposited, and the chemical stability and mechanical reliability of the films.
Presentation TF+VT-WeM3, “Improving the Reliability of Electronics Using ALD Barrier Films,” is at 8:40 a.m. Pacific Time on Wednesday, Oct. 30, 2013.
MORE INFORMATION ABOUT THE AVS 60th INTERNATIONAL SYMPOSIUM & EXHIBITION
The Long Beach Convention Center is located at 300 E. Ocean Blvd., Long Beach, CA 90802.
Main meeting website: http://www2.avs.org/symposium/AVS60/pages/info.html
Technical Program: http://www.avssymposium.org/
The AVS Pressroom will be located in the Long Beach Convention Center. Pressroom hours are Monday-Thursday, 8:00 a.m. - 5:00 p.m. Your press badge will allow you to utilize the pressroom to write, interview, collect new product releases, review material, or just relax. The press badge will also admit you, free of charge, into the exhibit area, lectures, and technical sessions, as well as the Welcome Mixer on Monday Evening and the Awards Ceremony and Reception on Wednesday night.
This news release was prepared for AVS by the American Institute of Physics (AIP).
Founded in 1953, AVS is a not-for-profit professional society that promotes communication between academia, government laboratories, and industry for the purpose of sharing research and development findings over a broad range of technologically relevant topics. Its symposia and journals provide an important forum for the dissemination of information in many areas of science and technology, enabling a critical gateway for the rapid insertion of scientific breakthroughs into manufacturing realities.
Catherine Meyers | Source: Newswise
Further information: www.aip.org
More articles from Materials Sciences:
Accelerated corrosion testing of silver provides clues about performance in atmospheric conditions
04.12.2013 | NACE International
New Effect Couples Electricity and Magnetism in Materials
28.11.2013 | Vienna University of Technology
Quantum entanglement, a perplexing phenomenon of quantum mechanics that Albert Einstein once referred to as “spooky action at a distance,” could be even spookier than Einstein perceived.
Physicists at the University of Washington and Stony Brook University in New York believe the phenomenon might be intrinsically linked with wormholes, hypothetical features of space-time that in popular science fiction can provide a much-faster-than-light shortcut from one part of the universe to another.
But here’s the catch: One couldn’t actually ...
A star is formed when a large cloud of gas and dust condenses and eventually becomes so dense that it collapses into a ball of gas, where the pressure heats the matter, creating a glowing gas ball – a star is born.
New research from the Niels Bohr Institute, among others, shows that a young, newly formed star in the Milky Way had such an explosive growth, that it was initially about 100 times brighter than it is now. The results are published in the scientific journal, Astrophysical Journal Letters.
The young ...
EPFL scientists have shown how to achieve a dramatic increase in the capacity of optical fibers; Their simple, innovative solution reduces the amount of space required between the pulses of light that transport data
Optical fibers carry data in the form of pulses of light over distances of thousands of miles at amazing speeds. They are one of the glories of modern telecommunications technology.
However, their capacity is limited, because the pulses of light need to be lined up one after the other in ...
NASA's Hurricane and Severe Storms Sentinel airborne mission known as HS3 wrapped up for the 2013 Atlantic Ocean hurricane season at the end of September, and had several highlights. HS3 will return to NASA’s Wallops Flight Facility in Wallops Island, Va., for the 2014 Atlantic hurricane season.
During the 2013 mission, two unmanned Global Hawks flew from Wallops for the first time. The mission highlights included studying the Saharan Air Layer, following the genesis of a tropical storm, finding a unique hybrid core or center circulation in a redeveloped storm, obtaining measurements on the strongest side of ...
Nanosponges that soak up a dangerous pore-forming toxin produced by MRSA (methicillin-resistant Staphylococcus aureus) could serve as a safe and effective vaccine against this toxin.
This "nanosponge vaccine" enabled the immune systems of mice to block the adverse effects of the alpha-haemolysin toxin from MRSA—both within the bloodstream and on the skin. Nanoengineers from the University of California, San Diego described the safety and efficacy of this nanosponge vaccine in the December 1 issue of ...
04.12.2013 | Health and Medicine
04.12.2013 | Materials Sciences
04.12.2013 | Ecology, The Environment and Conservation
04.12.2013 | Event News
12.11.2013 | Event News
29.10.2013 | Event News