Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

New System Provides ‘Real-Time’ Tracking For Parcels

24.02.2005


A new system that provides real-time, intelligent, end-to-end tracking and tracing for goods being transported around the world has been developed with the help of 2.5 million euros from the EUs Framework Programme.



ParcelCall brought together a consortium of leading European industrial and academic partners to create a system that operates across all borders and carriers whatever mode of transport is being used. The system utilises RFID (Radio Frequency Identification) technology, a Mobile Logistic Server (MLS) with GPS (Global Positioning System) and ‘Thinking Tags’ that measure and monitor environmental conditions - a major benefit when transporting perishable goods.

“Although many carriers in transport and logistics have had tracking and tracing systems in place, these only cover the individual carrier”, says Professor Robin Williams, at the University of Edinburgh, who led ParcelCall’s socio-economic research component. “Now, with supply chains becoming more and more complex - often involving more than one carrier and multiple transport modes - there is a much higher demand for an across the board system. ParcelCall focuses on interoperability, open interfaces, and standardization in order to allow seamless tracking and tracing across the entire logistics and transportation chain.


“So, with its open and scalable system architecture, a small trucking company could adopt the ParcelCall tracking and tracing services just as easily as a large national or international carrier. ParcelCall could also be extended easily by adding new server components.”

The Mobile Logistic Server (MLS) - fitted with GPS receivers to provide accurate and secure global tracking and tracing - keeps track of individual items being transported inside a vehicle or container. This means it is aware of the identity, current location and status of all goods in the unit at all times even if a single item out of a large shipment gets lost, damaged, or takes a different route to the rest of the shipment.

The MLS then makes its information available to a network of fixed servers through mobile communication networks - on demand and on a real-time basis. The system can be programmed to actively alert the owner of the goods, or the transport operator, if the goods deviate from a predefined route, a delay occurs, or an alarm has been generated.

“ParcelCall goes beyond mere item identification”, adds Professor Williams. “Sensitive, perishable and high-risk goods - such as pharmaceuticals, whose temperature needs to be monitored without interruption, or shock-sensitive electronic devices - will be equipped with ‘Thinking Tags’. These compact reusable devices are equipped with sensors, processing power, memory and are capable of active, two way radio communication. This means they can monitor their environmental conditions - such as temperature, humidity or shock - record a history of status information, including location, and measurement data, and actively send alerts or messages. ‘Thinking Tags’ are usually associated with individual items rather than with a container or other transport unit, providing seamless end-to-end surveillance of status, location, and environmental data.”

Thinking Tags will be particularly useful in providing invaluable information in the case of theft or loss, and help in settling liability issues if damage or mishandling has occurred. Further information can be found at http://www.i4.informatik.rwth-aachen.de/parcelcall/

“This is an excellent example of how Framework Funding is being used to develop information technology systems that make our lives easier”, says Peter Walters, FP6UK’s National Contact Point for Information Society Technologies. “I am confident that there will be considerable demand for ParcelCall from within the transport and logistics industry. It is also the type of system that may lend itself to be adapted at some time in the future for tracking and tracing required by other businesses.

“The Framework Programmes are the EU’s main vehicle for support of leading edge, internationally collaborative R&D. The current Framework Programme (FP6) runs until 2006 and organisations wanting free, easy to access, information on the €17.5bn of funding available within FP6 should log on to http://fp6uk.ost.gov.uk or call central telephone support on 0870 600 6080.”

Professor Robin Williams believes the implications of the technologies developed and demonstrated by ParcelCall extend well beyond transport, saying: “The whole area of logistics and product life-cycle management and ultimately the so-called ‘Internet of things’ will benefit.”

“EU support for ParcelCall R&D allowed diverse players to learn about RFID and the convergence of Internet and mobile and wireless technologies. Our project evaluation showed that the key outcome was not a particular artefact but the opportunity the project afforded to exchange knowledge and learn between different communities: different technical domains, between science and engineering and social science, between technology supply and user industry.”

Dave Sanders | alfa
Further information:
http://fp6uk.ost.gov.uk

More articles from Transportation and Logistics:

nachricht Tool helps cities to plan electric bus routes, and calculate the benefits
09.01.2017 | International Institute for Applied Systems Analysis (IIASA)

nachricht Realistic training for extreme flight conditions
28.12.2016 | Technical University of Munich (TUM)

All articles from Transportation and Logistics >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Making lightweight construction suitable for series production

More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.

Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...

Im Focus: Wonder material? Novel nanotube structure strengthens thin films for flexible electronics

Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.

"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...

Im Focus: Deep inside Galaxy M87

The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.

Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...

Im Focus: A Quantum Low Pass for Photons

Physicists in Garching observe novel quantum effect that limits the number of emitted photons.

The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...

Im Focus: Microprocessors based on a layer of just three atoms

Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.

Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Expert meeting “Health Business Connect” will connect international medical technology companies

20.04.2017 | Event News

Wenn der Computer das Gehirn austrickst

18.04.2017 | Event News

7th International Conference on Crystalline Silicon Photovoltaics in Freiburg on April 3-5, 2017

03.04.2017 | Event News

 
Latest News

Bare bones: Making bones transparent

27.04.2017 | Life Sciences

Study offers new theoretical approach to describing non-equilibrium phase transitions

27.04.2017 | Physics and Astronomy

From volcano's slope, NASA instrument looks sky high and to the future

27.04.2017 | Earth Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>