In their efforts to increase road safety, governments world-wide are adopting stricter regulations concerning driving and working hours of truck drivers. However, it often remains unclear whether new regulations have the desired impact on road safety.
Asvin Goel, Professor of International Logistics at Jacobs University, Germany, and Thibaut Vidal, Researcher at CIRRELT in Canada as well as at MIT in the United States now analyzed and compared the impact of different hours of service regulations in different countries.
“Hours of service regulations are often quite complex. This complicates the daily life of truck drivers who have to comply with these regulations and makes it very difficult to analyze their impact on operating costs and road safety” says Asvin Goel. In Europe, for example, truck drivers must normally take a rest period of 11 continuous hours after driving for at most 9 hours.
However, due to additional provisions in the regulations, truck drivers may also take rest periods in two parts and can sometimes drive up to 10 hours a day while taking only 9 hours of rest. Professor Goel succeeded in modeling these rules and other regulations world-wide and, together with Thibaut Vidal, was able to quantify the impact of hours of service regulations on transportation costs and accident risks in Europe, North America, and Australia.
“Our experiments show that the highest road safety is achieved if only the basic provisions of the EU regulations are considered. By exploiting the additional provisions of the regulations, transport companies can significantly reduce transportation costs – however, this comes at the cost of higher accident risks which are comparable to the risks resulting from U.S. hours of service regulations which allow truck drivers to drive up to 11 hours without a rest. Australian regulations appear to lead to unnecessarily high accident risks which cannot be justified by increased operating efficiency. The lowest transportation costs can be observed for Canadian regulations” says Prof. Goel.
In their study Asvin Goel and Thibaut Vidal developed a new algorithm for vehicle routing with hours of service constraints. Besides of being used for the regulatory impact analysis, this algorithm can also be used by transport companies to optimize their routes while guaranteeing that drivers have sufficient time to take breaks and rest periods and are able to comply with the regulations. The algorithm outperforms all previous approaches and can be used for different regulations world wide. By using the algorithm companies can simultaneously minimize transportation costs and accident risks.
Judith Ahues | Source: Informationsdienst Wissenschaft
Further information: www.jacobs-university.de/
More articles from Transportation and Logistics:
Better User Interface Design Could Mitigate “Automation Addiction” and Other Flying Errors, HF/E Experts Suggest
17.12.2013 | Human Factors and Ergonomics Society
Siemens to automate the two busiest commuter lines in the USA
20.11.2013 | Siemens AG
Swimming microengines made from platinum and iron are highly efficient in removing organic pollutants from water using hydrogen peroxide.
Researchers from the Max Planck Institute for Intelligent Systems in Stuttgart have developed a new method for the active degradation of organic pollutants in solution by using swimming microengines.
The mobile microcleaners consist of an outer iron and an inner platinum layer, thereby combining two functionalities. Hydrogen peroxide, which must be ...
A 12-year study of massive stars has reaffirmed that our Galaxy has four spiral arms, following years of debate sparked by images taken by NASA's Spitzer Space Telescope that only showed two arms.
The new research, which is published online today [17 December] in the Monthly Notices of the Royal Astronomical Society, is part of the RMS Survey, which was launched by academics at the University of Leeds.
Astronomers cannot see what our Galaxy, which is called the Milky Way, looks like because we ...
In collaboration with the University of Basel, an international team of researchers has observed a strong energy loss caused by frictional effects in the vicinity of charge density waves.
This may have practical significance in the control of nanoscale friction. The results have been published in the scientific journal Nature Materials.
Friction is often seen as an adverse phenomenon that leads to wear and causes energy loss. Conversely, however, too little friction can be a disadvantage as well – ...
A new type of transistor that could make possible fast and low-power computing devices for energy-constrained applications such as smart sensor networks, implantable medical electronics and ultra-mobile computing is feasible, according to Penn State researchers.
Called a near broken-gap tunnel field effect transistor (TFET), the new device uses the quantum mechanical tunneling of electrons through an ultrathin energy barrier to provide high current at low voltage.
Penn State, the National Institute of Standards and Technology and IQE, a specialty wafer manufacturer, jointly presented their findings at ...
The team of Johannes Zuber at the IMP in Vienna, Austria, managed to overcome remaining key limitations of RNA interference (RNAi) - a unique method to specifically shut off genes.
By using an optimized design, the scientists were able to inhibit genes with greatly enhanced efficiency and accuracy. The new method facilitates the search for drug targets and improves the interpretation of experimental results.
The IMP will make this „RNAi toolkit“ available to researchers. Results of the study are published in ...
20.12.2013 | Materials Sciences
20.12.2013 | Life Sciences
20.12.2013 | Life Sciences
19.12.2013 | Event News
11.12.2013 | Event News
10.12.2013 | Event News