Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Speeding Up Drug Discovery with Rapid 3D Mapping of Proteins

31.05.2012
Salk scientists develop new technique for solving the structure of most popular targets for half of all drugs, potentially aiding discovery of new therapeutics

A new method for rapidly solving the three-dimensional structures of a special group of proteins, known as integral membrane proteins, may speed drug discovery by providing scientists with precise targets for new therapies, according to a paper published May 20 in Nature Methods.

The technique, developed by scientists at the Salk Institute for Biological Studies, provides a shortcut for determining the structure of human integral membrane proteins (hIMPs), molecules found on the surface of cells that serve as the targets for about half of all current drugs.

Knowing the exact three-dimensional shape of hIMPs allows drug developers to understand the precise biochemical mechanisms by which current drugs work and to develop new drugs that target the proteins.

"Our cells contain around 8,000 of these proteins, but structural biologists have known the three-dimensional structure of only 30 hIMPs reported by the entire field over many years," says Senyon Choe, a professor in Salk's Structural Biology Laboratory and lead author on the paper. "We solved six more in a matter of months using this new technique. The very limited information on the shape of human membrane proteins hampers structure-driven drug design, but our method should help address this by dramatically increasing the library of known hIMP structures."

Integral membrane proteins are attached to the membrane surrounding each cell, serving as gateways for absorbing nutrients, hormones and drugs, removing waste products, and allowing cells to communicate with their environment. Many diseases, including Alzheimer's, heart disease and cancer have been linked to malfunctioning hIMPs, and many drugs, ranging from aspirin to schizophrenia medications, target these proteins.

Most of the existing drugs were discovered through brute force methods that required screening thousands of potential molecules in laboratory studies to determine if they had a therapeutic effect. Given a blueprint of the 3D structure of a hIMP involved in a specific disease, however, drug developers could focus only on molecules that are most likely to interact with the target hIMP, saving time and expense.

In the past, it was extremely difficult to solve the structure of hIMPs, due to the difficulty of harvesting them from cells and the difficulty of labeling the amino acids that compose the proteins, a key step in determining their three-dimensional configuration.

"One problem was that hIMPs serve many functions in a cell, so if you tried to engineer cells with many copies of the proteins on their membrane, they would die before you could harvest the hIMPs," says Christian Klammt, a postdoctoral researcher in Choe's lab and a first author on the paper.

To get around this, the scientists created an outside-the-cell environment, called cell-free expression system, to synthesize the proteins. They used a plexiglass chamber that contained all the biochemical elements necessary to manufacture hIMPs as if they were inside the cell. This system provided the researchers with enough of the proteins to conduct structural analysis.

The cell-free method also allowed them to easily add labeled amino acids into the biochemical stew, which were then incorporated into the proteins. These amino acids gave off telltale structural clues when analyzed with nuclear magnetic resonance spectroscopy, a method for using the magnetic properties of atoms to determine a molecule's physical and chemical properties.

"It was very difficult and inefficient to introduce labeled amino acids selectively into the protein produced in live cells," says Innokentiy Maslennikov, a Salk staff scientist and co-first author on the paper. "With a cell-free system, we can precisely control what amino acids are available for protein production, giving us isotope-labeled hIMPs in large quantities. Using a proprietary labeling strategy we devised a means to minimize the number of samples to prepare."

Prior methods might take up to a year to determine a single protein structure, but using their new method, the Salk scientists determined the structure of six hIMPs within just 18 months. They have already identified 38 more hIMPs that are suitable for analysis with their technique, and expect it will be used to solve the structure for many more.

Paul Slesinger, an associate professor in Salk's Clayton Foundation Laboratories for Peptide Biology, contributed to the research, as did scientists at the Joint Center for Biosciences in Korea, ETH Zurich in Switzerland and the University of California San Francisco.

Other authors on the paper were Monika Bayrhuber, Cédric Eichmann, Navratna Vajpai, Ellis Jeremy Chua Chiu, Katherine Blain, Luis Esquivies, June Hyun Jung Kwon, Bartosz Balana, Ursula Pieper, Andrej Sali, Witek Kwiatkowski and Roland Riek.

The research was supported by the World Class University Program and the National Institutes of Health.

About the Salk Institute for Biological Studies:

The Salk Institute for Biological Studies is one of the world's preeminent basic research institutions, where internationally renowned faculty probe fundamental life science questions in a unique, collaborative, and creative environment. Focused both on discovery and on mentoring future generations of researchers, Salk scientists make groundbreaking contributions to our understanding of cancer, aging, Alzheimer's, diabetes and infectious diseases by studying neuroscience, genetics, cell and plant biology, and related disciplines.

Faculty achievements have been recognized with numerous honors, including Nobel Prizes and memberships in the National Academy of Sciences. Founded in 1960 by polio vaccine pioneer Jonas Salk, M.D., the Institute is an independent nonprofit organization and architectural landmark.

Andy Hoang | Newswise Science News
Further information:
http://www.salk.edu

More articles from Life Sciences:

nachricht Decoding the genome's cryptic language
27.02.2017 | University of California - San Diego

nachricht New risk factors for anxiety disorders
24.02.2017 | Julius-Maximilians-Universität Würzburg

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

New pop-up strategy inspired by cuts, not folds

27.02.2017 | Materials Sciences

Sandia uses confined nanoparticles to improve hydrogen storage materials performance

27.02.2017 | Interdisciplinary Research

Decoding the genome's cryptic language

27.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>