Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Scientists Name Two New Species of Horned Dinosaur

13.03.2012
Two new horned dinosaurs have been named based on fossils collected from Alberta, Canada.
The new species, Unescopceratops koppelhusae and Gryphoceratops morrisoni, are from the Leptoceratopsidae family of horned dinosaurs. The herbivores lived during the Late Cretaceous period between 75 to 83 million years ago. The specimens are described in research published in the Jan. 24, 2012, online issue of the journal Cretaceous Research.

“These dinosaurs fill important gaps in the evolutionary history of small-bodied horned dinosaurs that lack the large horns and frills of relatives like Triceratops from North America,” said Michael Ryan, Ph.D., curator of vertebrate paleontology at The Cleveland Museum of Natural History, lead author on the research. “Although horned dinosaurs originated in Asia, our analysis suggests that leptoceratopsids radiated to North America and diversified here, since the new species, Gryphoceratops, is the earliest record of the group on this continent.”

Unescoceratops koppelhusae lived approximately 75 million years ago. It measured about one to two meters (6.5 feet) in length and weighed less than 91 kilograms (200 pounds). It had a short frill extending from behind its head but did not have ornamentation on its skull. It had a parrot-like beak. Its teeth were lower and rounder than those of any other leptoceratopsid. In addition, its hatchet-shaped jaw had a distinct portion of bone that projected below the jaw like a small chin.

The lower left jaw fragment of Unescoceratops was discovered in 1995 in Dinosaur Provincial Park, a United Nations Educational, Scientific and Cultural Organization (UNESCO) World Heritage Site by Philip Currie, Ph.D., now of the University of Alberta. Originally described in 1998 by Ryan and Currie, the dinosaur was referred to as Leptoceratops. Subsequent research by Ryan and David Evans, Ph.D., of the Royal Ontario Museum in Toronto, Canada, determined the specimen was a new genus and species. The genus is named to honor the UNESCO World Heritage Site designation for the locality where the specimen was found and from the Greek “ceratops,” which means “horned face.” The species is named for Eva Koppelhus, Ph.D., a palynologist at the University of Alberta and wife of Currie.

Gryphoceratops morrisoni lived about 83 million years ago. It had a shorter and deeper jaw shape than any other leptoceratopsid. Researchers believe the individual was a full-grown adult. Based on unique characteristics of the jaw and its size, the researchers believe that Gryphoceratops was an adult that did not exceed one-half meter in length. This means it is the smallest adult-sized horned dinosaur in North America and one of the smallest adult-sized plant-eating dinosaurs known.

Lower right jaw fragments of Gryphoceratops were discovered in southern Alberta in 1950 by Levi Sternberg while he worked for the Royal Ontario Museum. The genus is named for “Gryphon,” a mythological Greek figure with the body of a lion and the head of an eagle, which is a reference to the animal’s beaked face. The species name honors Ian Morrison, a Royal Ontario Museum technician, who discovered how the bones fit together.

Second author Evans, associate curator of vertebrate palaeontology at the Royal Ontario Museum and assistant professor at the University of Toronto, said, “Small-bodied dinosaurs are typically poorly represented in the fossil record, which is why fragmentary remains like these new leptoceratopsids can make a big contribution to our understanding of dinosaur ecology and evolution.”

Contributing authors are Philip Currie, Ph.D., of the University of Alberta; Caleb Brown of the University of Toronto; and Don Brinkman, Ph.D., of the Royal Tyrrell Museum of Palaeontology.

The Cleveland Museum of Natural History, incorporated in 1920, is one of the finest institutions of its kind in North America. It is noted for its collections, research, educational programs and exhibits. The collections encompass more than 5 million artifacts and specimens, and research of global significance focuses on 11 natural science disciplines. Museum visitors broaden their perspectives of the natural world through exhibits, educational programs, lectures, live animal programs and planetarium shows. The Museum is located at 1 Wade Oval Drive, University Circle, Cleveland, OH 44106. 216-231-4600 or 800-317-9155. www.cmnh.org.

Glenda Bogar | EurekAlert!
Further information:
http://www.cmnh.org

More articles from Life Sciences:

nachricht New risk factors for anxiety disorders
24.02.2017 | Julius-Maximilians-Universität Würzburg

nachricht Stingless bees have their nests protected by soldiers
24.02.2017 | Johannes Gutenberg-Universität Mainz

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Stingless bees have their nests protected by soldiers

24.02.2017 | Life Sciences

New risk factors for anxiety disorders

24.02.2017 | Life Sciences

MWC 2017: 5G Capital Berlin

24.02.2017 | Trade Fair News

VideoLinks
B2B-VideoLinks
More VideoLinks >>>