Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:


DASGIP presents product innovations during Biotechnica 2007

Online monitoring of optical density, expanded gassing solutions for small and pilot scale, and a special fermenting system for anaerobic cells

DASGIP AG, leading manufacturer of parallel bioreactor systems, will present a number of innovations at their booth during Biotechnica in Hanover.

OD4, an online monitoring module for optical density, offers fast and accurate measurement of biomass and cell growth in up to four vessels. OD4 utilizes small sensors and a proprietary signal processing algorithm to reduce the signal disturbance caused by gas bubbles in the media. These features make the OD4 module the best OD measurement solution for small scale operation.

DASGIP’s new software edition, DASGIP Control 4.0, offers freely programmable profiles in a very user-friendly operator interface, which makes working with the DASGIP system easier than ever. Other expanded automation features such as the “Triggering Automation Package“ and the parallel operation of up to 16 vessels, can enhance the efficiency of any laboratory.

... more about:
»BIOTECHNICA »gassing »scale

DASGIP’s advanced gassing solutions have two new additions of mass flow controlled systems: MX4/1 system mixes oxygen, air, carbon dioxide and nitrogen and supplies to one output; while MF4 mixes four freely selectable input gases and supplies to four outlets. Both gassing systems provide safe and efficient gassing to pilot scale production and, with the use of external pressure sensors, can be used with cell culture bags.

DASGIP has also developed a new fermentation system especially for anaerobic microorganisms. Providing monitoring and control of the redox potential as well as temperature control up to 95°C the system has been designed to meet special requirements in biofuel development.

Two seminars will be given by DASGIP at Biotechnica: “Advanced Tools Meeting New Challenges in Biofuel Development“, which details the use of DASGIP’s technologies in biofuel development, will be given by Dr. Christof Knocke on 9th October at 12.00pm. A second seminar will be given by Dr. Jörg Schwinde on 10th October at 3.10pm on “Industrial Biotechnology and Tools for Process Understanding“. The DASGIP team cordially invites attendees to a traditional “Beer &Pretzels” reception on 9th October from 4.30pm in booth G25, Hall 9.

DASGIP AG at Biotechnica 2007:

9.10.2007 12.00 – 12.30pm
“Advanced Tools Meeting New Challenges in Biofuel Development“,
München room, Convention Center, Dr. Christof Knocke
9.10.2007 4.30 – 6.00pm
Beer & Pretzels reception,
booth G25 in Hall 9
10.10.2007 3.10 – 3.30pm
“Industrial Biotechnology and Tools for Process Understanding“,
room 18, Dr. Jörg Schwinde
About DASGIP: DASGIP AG develops and manufactures technologically advanced Parallel Bioreactor Systems for the cultivation of microbial and mammalian cells at bench top and pilot scale. Process engineers, scientists and product developers from biotechnological, pharmaceutical and chemical companies as well as research institutions use DASGIP Parallel Bioreactor Systems for their biotechnological processes and benefit from increased productivity, high reproducibility, and ease of scale up, resulting in accelerated product development cycles. DASGIP is located in Juelich (Germany) and Shrewsbury MA (USA).
Jennefer Vogt, DASGIP AG, Tel: +49 2461.980 -118,
Dr. Holger Bengs, Biotech Consulting,Tel:+49 (0) 69 – 61 994 273,
Rudolf-Schulten-Str. 5
D – 52428 Jülich
Phone: +49 2461.980.0
Fax: +49 2461.980.100

Jennefer Vogt | DASGIP AG
Further information:

Further reports about: BIOTECHNICA gassing scale

More articles from Life Sciences:

nachricht Novel mechanisms of action discovered for the skin cancer medication Imiquimod
21.10.2016 | Technische Universität München

nachricht Second research flight into zero gravity
21.10.2016 | Universität Zürich

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New 3-D wiring technique brings scalable quantum computers closer to reality

Researchers from the Institute for Quantum Computing (IQC) at the University of Waterloo led the development of a new extensible wiring technique capable of controlling superconducting quantum bits, representing a significant step towards to the realization of a scalable quantum computer.

"The quantum socket is a wiring method that uses three-dimensional wires based on spring-loaded pins to address individual qubits," said Jeremy Béjanin, a PhD...

Im Focus: Scientists develop a semiconductor nanocomposite material that moves in response to light

In a paper in Scientific Reports, a research team at Worcester Polytechnic Institute describes a novel light-activated phenomenon that could become the basis for applications as diverse as microscopic robotic grippers and more efficient solar cells.

A research team at Worcester Polytechnic Institute (WPI) has developed a revolutionary, light-activated semiconductor nanocomposite material that can be used...

Im Focus: Diamonds aren't forever: Sandia, Harvard team create first quantum computer bridge

By forcefully embedding two silicon atoms in a diamond matrix, Sandia researchers have demonstrated for the first time on a single chip all the components needed to create a quantum bridge to link quantum computers together.

"People have already built small quantum computers," says Sandia researcher Ryan Camacho. "Maybe the first useful one won't be a single giant quantum computer...

Im Focus: New Products - Highlights of COMPAMED 2016

COMPAMED has become the leading international marketplace for suppliers of medical manufacturing. The trade fair, which takes place every November and is co-located to MEDICA in Dusseldorf, has been steadily growing over the past years and shows that medical technology remains a rapidly growing market.

In 2016, the joint pavilion by the IVAM Microtechnology Network, the Product Market “High-tech for Medical Devices”, will be located in Hall 8a again and will...

Im Focus: Ultra-thin ferroelectric material for next-generation electronics

'Ferroelectric' materials can switch between different states of electrical polarization in response to an external electric field. This flexibility means they show promise for many applications, for example in electronic devices and computer memory. Current ferroelectric materials are highly valued for their thermal and chemical stability and rapid electro-mechanical responses, but creating a material that is scalable down to the tiny sizes needed for technologies like silicon-based semiconductors (Si-based CMOS) has proven challenging.

Now, Hiroshi Funakubo and co-workers at the Tokyo Institute of Technology, in collaboration with researchers across Japan, have conducted experiments to...

All Focus news of the innovation-report >>>



Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

Agricultural Trade Developments and Potentials in Central Asia and the South Caucasus

14.10.2016 | Event News

World Health Summit – Day Three: A Call to Action

12.10.2016 | Event News

Latest News

Resolving the mystery of preeclampsia

21.10.2016 | Health and Medicine

Stanford researchers create new special-purpose computer that may someday save us billions

21.10.2016 | Information Technology

From ancient fossils to future cars

21.10.2016 | Materials Sciences

More VideoLinks >>>