Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Newfound grasshopper takes to the trees on Konza Prairie

22.04.2004


Grasses typify the Great Plains, so it’s not surprising that more than 108 species of grasshoppers are at home on the range in the central United States.



However, a grasshopper that doesn’t love grass lives in Kansas too, a recent discovery at Kansas State University’s Konza Prairie Biological Station shows. This newfound hopper prefers trees.

The first specimen was actually collected in September 2001 by a student from Fort Riley Middle School, according to Valerie Wright, Konza’s environmental educator and naturalist. However, it wasn’t at first recognized as a new species for the Konza Prairie list, she said.


The student collected the insect as part of an ongoing ecological study of grasshopper diversity on Konza called "Schoolyard LTER," short for Long-Term Ecological Research, a program funded by the National Science Foundation.

The rare tree-dweller has now been positively identified as the Grizzly Spur-throat Grasshopper. Ted Hopkins, retired K-State entomology professor, longtime grasshopper researcher and Konza Prairie volunteer docent, made the identification.

"This appears to be the first recorded sighting of the Grizzly grasshopper in the Flint Hills region of Kansas," Hopkins said.

He discovered two large, dark-colored female hoppers basking in the sun on the stone wall of the old ranch house at Konza in mid-October 2002. Wright, also an entomologist, subsequently collected five males and females from hackberry tree trunks in October 2003.

Melanoplus punctualatus, the Grizzly grasshopper, was first identified in the United States in 1862 by an entomologist named Scudder, who specialized in grasshopper identification studies. The Grizzly has preferred eastern hardwood forests and the pine forests of the southeastern region of the country. The species has been reported twice before in Kansas, Onaga and Oswego, as verified by Hopkins in a search of K-State’s extensive entomology specimen collection.

"Its discovery on Konza is a big surprise," Hopkins said. Plans are to begin in-depth research on the Grizzly’s lifecycle and habitat for the first time, just as soon as the insects emerge this summer.

Writing in the Spring 2004 issue of "Tallgrass Gazette," the newsletter for Konza Prairie docents, Hopkins said the Grizzly grasshopper "is a rather unique grasshopper that spends most of its life in trees and is seldom observed because of it secretive habits. It occurs in very low numbers, and that makes it more difficult to determine its habitat."

Hopkins speculates that its potential distribution on Konza will be limited to wooded areas along creeks and to trees around the headquarters and the Hokanson Homestead.

The Grizzly is a relatively large, very slow moving insect, and given its protective coloration -- medium-gray speckled with dark dots, sometimes with yellowish and whitish areas -- it disappears against the lichen-covered tree bark.

Hopkins plans to begin his research observation near the hackberry trees where the hoppers were last seen.

"I’ll be watching for tiny first-stage grasshoppers that hatch from the eggs in late spring and I will observe their development to adulthood," he said. Grasshoppers typically go through five molting stages before becoming adults. Later in the fall, he’ll try to collect enough adult specimens to determine food source and feeding habits.

Hopkins says though so little is known about this insect, it’s likely the Grizzly Spur-throat Grasshopper has been in Kansas "as long as there have been trees."


###

Ted Hopkins | EurekAlert!
Further information:
http://www.ksu.edu/

More articles from Life Sciences:

nachricht Light-driven reaction converts carbon dioxide into fuel
23.02.2017 | Duke University

nachricht Oil and gas wastewater spills alter microbes in West Virginia waters
23.02.2017 | Rutgers University

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Organ-on-a-chip mimics heart's biomechanical properties

23.02.2017 | Health and Medicine

Light-driven reaction converts carbon dioxide into fuel

23.02.2017 | Life Sciences

Oil and gas wastewater spills alter microbes in West Virginia waters

23.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>