The sepals of the plant Arabidopsis thaliana—commonly known as the mouse-eared cress—are characterized by an outer layer of cells that vary widely in their sizes, and are distributed in equally varied patterns and proportions.
Scientists have long wondered how the plant regulates cell division to create these patterns—in other words, how it decides which and how many cells will be large, which slightly smaller, and which very small.
Melding time-lapse imaging and computer modeling, a team of scientists led by biologists from the California Institute of Technology (Caltech) has provided a somewhat unexpected answer to this question.
"We conclude that probabilistic decisions of individual cells—rather than organ-wide mechanisms—can produce a characteristic and robust cell-size pattern in development," says Elliot Meyerowitz, the George W. Beadle Professor of Biology and chair of the Division of Biology at Caltech.
These findings were published on May 11 in the online journal PLoS Biology.
A plant's sepals are the small green leaf-like organs that cup the petals of a flower, enclosing and protecting the flower before it blooms. The outer layer, or epidermis, of the Arabidopsis sepal consists of cells of widely varying sizes. These cells range in size from very small to very large; the largest cells are a type found only in the sepals and are dubbed, appropriately, "giant cells."
Each of the four sepals that cup an Arabidopsis flower has a unique pattern of cell sizes. What the Caltech-led team wanted to find out was what determines this pattern.
To gain insight into the process, Meyerowitz and Caltech postdoctoral scholar Adrienne Roeder imaged sepals during their early development. They tracked each round of cell divisions to determine how the different cell sizes were created, and what influences their distribution pattern. They then worked with senior postdoctoral scholar Vijay Chickarmane, who had designed a computer model to test the team's hypotheses about how the observed size-related patterning in the sepals comes to pass.
"We started using the live imaging of the sepals to gather data to make a hypothesis about the patterning," Roeder explains. "Then we ran that hypothesis as a model in the computer, to see whether it would give us the patterns we were seeing in the imaging."
At first, the computer model was unable to produce the patterns found in the actual sepals. So the team tweaked the model until it independently produced the range of cell sizes the team had seen in the living organ.
They found the sepal generates its epidermal cell-size pattern based not on an organ-wide control mechanism, but on when or whether each individual cell decides to divide and on the length of its cell cycle. This sort of random, probabilistic development process results in sepal patterns that not only differ from flower to flower, but from sepal to sepal within an individual flower.
"This is so contrary to our normal way of thinking," says Roeder, "in which we assume that there's always something dictating exactly what each cell is going to do."Cells in the sepal can undergo one of two growth cycles. The first is normal cell division, in which the cell duplicates its chromosomes and then splits into two smaller cells. The other is a specialized type of cell cycle called endoreduplication, in which the cell duplicates its chromosomes but does not split in two; instead, it simply continues to grow ever larger.
For a cell to become a giant cell, she explains, it will generally need to endoreduplicate during its first cell cycle. If it waits a cycle or two to stop dividing, it will have less time to grow, and thus will be a slightly smaller cell. Cells that never endoreduplicate—i.e., cells that continue to divide with each cell cycle—will be among the smallest cells in the sepal.
"Each cell starts out with a chance to become a giant cell," Roeder says. "It's a probabilistic thing; each cell has a certain probability of making that decision. Once it makes the decision, however, its fate is determined."
But endoreduplication isn't the only thing that decides the ultimate size of a sepal cell, the research team found. A cell that endoreduplicates early can grow to be an even larger giant if its cell cycles are longer than average, giving it plenty of growing time.
To prove their point, the team performed a series of experiments in which they altered the levels of cell-cycle inhibitors in the sepal cells. When they decreased the inhibitor—increasing the frequency with which the cell divides, and thus reducing the length of the cell cycle—the sepal cells were unable to grow into giant cells.
"These findings back up our hypothesis," says Roeder. "And when you change the parameters in the computer model, as if you were reducing the level of a cell-cycle inhibitor, the model shows the same pattern."
Understanding exactly how sepal cells decide whether to grow big or small could some day lead to practical applications, Roeder notes. For instance, the utility of various crops as biofuels depends on how much cellulose they contain. A sepal with a large number of giant cells has much less cell-wall surface area than a sepal with lots of smaller cells; since the cell wall is where cellulose is found, giant-cell-laden sepals would be less useful as biofuel.
"This work gives us ideas about how growth happens in these plants," says Roeder. "And once we better understand plant growth and cell division, we can better manipulate them."
In addition to Meyerowitz, Roeder, and Chickarmane, the other authors on the PLoS Biology paper, "Variability in the Control of Cell Division Underlies Sepal Epidermal Patterning in Arabidopsis thaliana," were Caltech computational scientist Alexandre Cunha; Boguslaw Obara, formerly at the University of California, Santa Barbara (UCSB), and now at the University of Oxford in the United Kingdom; and B.S. Manjunath from UCSB.
Their work was funded by a Helen Hay Whitney Foundation fellowship; the Gordon and Betty Moore Foundation Cell Center at Caltech; a grant from the Division of Chemical Sciences, Geosciences, and Biosciences in the Department of Energy's Office of Basic Energy Sciences; and the National Science Foundation.
Visit the Caltech Media Relations website at http://media.caltech.edu.
Lori Oliwenstein | EurekAlert!
Symbiotic bacteria: from hitchhiker to beetle bodyguard
28.04.2017 | Johannes Gutenberg-Universität Mainz
Nose2Brain – Better Therapy for Multiple Sclerosis
28.04.2017 | Fraunhofer-Institut für Grenzflächen- und Bioverfahrenstechnik IGB
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
28.04.2017 | Event News
20.04.2017 | Event News
18.04.2017 | Event News
28.04.2017 | Medical Engineering
28.04.2017 | Earth Sciences
28.04.2017 | Life Sciences