Designing non-electronic biological machines has been a riddle that scientists at the interface of biology and engineering have struggled to solve. The walking bio-bots demonstrate the Illinois team’s ability to forward-engineer functional machines using only hydrogel, heart cells and a 3-D printer.
With an altered design, the bio-bots could be customized for specific applications in medicine, energy or the environment. The research team, led by U. of I. professor Rashid Bashir, published its results in the journal Scientific Reports.
“The idea is that, by being able to design with biological structures, we can harness the power of cells and nature to address challenges facing society,” said Bashir, an Abel Bliss Professor of Engineering. “As engineers, we’ve always built things with hard materials, materials that are very predictable. Yet there are a lot of applications where nature solves a problem in such an elegant way. Can we replicate some of that if we can understand how to put things together with cells?”
The key to the bio-bots’ locomotion is asymmetry. Resembling a tiny springboard, each bot has one long, thin leg resting on a stout supporting leg. The thin leg is covered with rat cardiac cells. When the heart cells beat, the long leg pulses, propelling the bio-bot forward.
The team uses a 3-D printing method common in rapid prototyping to make the main body of the bot from hydrogel, a soft gelatin-like polymer. This approach allowed the researchers to explore various conformations and adjust their design for maximum speed. The ease of quickly altering design also will allow them to build and test other configurations with an eye toward potential applications.For example, Bashir envisions the bio-bots being used for drug screening or chemical analysis, since the bots’ motion can indicate how the cells are responding to the environment. By integrating cells that respond to certain stimuli, such as chemical gradients, the bio-bots could be used as sensors.
“Our goal is to see if we can get this thing to move toward chemical gradients, so we could eventually design something that can look for a specific toxin and then try to neutralize it,” said Bashir, who also is a professor of electrical and computer engineering, and of bioengineering. “Now you can think about a sensor that’s moving and constantly sampling and doing something useful, in medicine and the environment. The applications could be many, depending on what cell types we use and where we want to go with it.”
Next, the team will work to enhance control and function, such as integrating neurons to direct motion or cells that respond to light. They are also working on creating robots of different shapes, different numbers of legs, and robots that could climb slopes or steps.
“The idea here is that you can do it by forward-engineering,” said Bashir, who is the director of the Micro and Nanotechnology Laboratory. “We have the design rules to make these millimeter-scale shapes and different physical architectures, which hasn’t been done with this level of control. What we want to do now is add more functionality to it.”“I think we are just beginning to scratch the surface in this regard,” said graduate student Vincent Chan, first author of the paper. “That is what’s so exciting about this technology – to be able to exploit some of nature’s unique capabilities and utilize it for other beneficial purposes or functions.”
The National Science Foundation supported this work through a Science and Technology Center (Emergent Behavior of Integrated Cellular Systems).Graduate student Mitchell Collens, postdoctoral researcher Kidong Park, chemical and biological engineering professor Hyunjoon Kong, and mechanical science and engineering professor Taher Saif were co-authors of the paper. Bashir also is affiliated with the Frederick Seitz Materials Research Laboratory and the Institute for Genomic Biology at the U. of I.
Editor’s notes: To reach Rashid Bashir, call 217-333-3097; email firstname.lastname@example.org.The paper, “Development of miniaturized walking biological machines,” is available online:
Liz Ahlberg | University of Illinois
Navigational view of the brain thanks to powerful X-rays
18.10.2017 | Georgia Institute of Technology
Separating methane and CO2 will become more efficient
18.10.2017 | KU Leuven
University of Maryland researchers contribute to historic detection of gravitational waves and light created by event
On August 17, 2017, at 12:41:04 UTC, scientists made the first direct observation of a merger between two neutron stars--the dense, collapsed cores that remain...
Seven new papers describe the first-ever detection of light from a gravitational wave source. The event, caused by two neutron stars colliding and merging together, was dubbed GW170817 because it sent ripples through space-time that reached Earth on 2017 August 17. Around the world, hundreds of excited astronomers mobilized quickly and were able to observe the event using numerous telescopes, providing a wealth of new data.
Previous detections of gravitational waves have all involved the merger of two black holes, a feat that won the 2017 Nobel Prize in Physics earlier this month....
Material defects in end products can quickly result in failures in many areas of industry, and have a massive impact on the safe use of their products. This is why, in the field of quality assurance, intelligent, nondestructive sensor systems play a key role. They allow testing components and parts in a rapid and cost-efficient manner without destroying the actual product or changing its surface. Experts from the Fraunhofer IZFP in Saarbrücken will be presenting two exhibits at the Blechexpo in Stuttgart from 7–10 November 2017 that allow fast, reliable, and automated characterization of materials and detection of defects (Hall 5, Booth 5306).
When quality testing uses time-consuming destructive test methods, it can result in enormous costs due to damaging or destroying the products. And given that...
Using a new cooling technique MPQ scientists succeed at observing collisions in a dense beam of cold and slow dipolar molecules.
How do chemical reactions proceed at extremely low temperatures? The answer requires the investigation of molecular samples that are cold, dense, and slow at...
Scientists from the Max Planck Institute of Quantum Optics, using high precision laser spectroscopy of atomic hydrogen, confirm the surprisingly small value of the proton radius determined from muonic hydrogen.
It was one of the breakthroughs of the year 2010: Laser spectroscopy of muonic hydrogen resulted in a value for the proton charge radius that was significantly...
17.10.2017 | Event News
10.10.2017 | Event News
10.10.2017 | Event News
18.10.2017 | Materials Sciences
18.10.2017 | Physics and Astronomy
18.10.2017 | Physics and Astronomy