Standard sensors employ metal electrodes coated with enzymes that react with compounds and produce an electrical signal that can be measured. But the inefficiency of those sensors leads to imperfect measurements.
Carbon nanotubes, cylindrically shaped carbon molecules known to have excellent thermal and electrical properties, have been seen as a possibility for improving sensor performance. The problem is that the materials are not fully compatible with water, which limits their application in biological fluids.
Marshall Porterfield, a professor of agricultural and biological engineering and biomedical engineering, and Jong Hyun Choi, an assistant professor of mechanical engineering, have found a solution. Their findings, reported in the journal The Analyst, describe a sensor that essentially builds itself.
"In the future, we will be able to create a DNA sequence that is complementary to the carbon nanotubes and is compatible with specific biosensor enzymes for the many different compounds we want to measure," Porterfield said. "It will be a self-assembling platform for biosensors at the biomolecular level."
Choi developed a synthetic DNA that will attach to the surface of the carbon nanotubes and make them more water-soluble.
"Once the carbon nanotubes are in a solution, you only have to place the electrode into the solution and charge it. The carbon nanotubes will then coat the surface," Choi said.
The electrode coated with carbon nanotubes will attract the enzymes to finish the sensor's assembly.
The sensor described in the findings was designed for glucose. But Porterfield said it could be easily adapted for various compounds.
"You could mass produce these sensors for diabetes, for example, for insulin management for diabetic patients," Porterfield said.
Porterfield said it may one day be possible to develop other sensors using this technology that could lead to more personalized medicines that could test in real time the effectiveness of drugs on their targets as with cancer patients.
Porterfield said he would continue to develop biosensors to detect different compounds.
The National Institutes of Health and the Office of Naval Research funded the research.
Writer: Brian Wallheimer, 765-496-2050, email@example.com
Sources: Marshall Porterfield, 765-494-1190, firstname.lastname@example.org
Jong Hyun Choi, 765-496-3562, email@example.comAg Communications: (765) 494-2722;
Brian Wallheimer | EurekAlert!
'Y' a protein unicorn might matter in glaucoma
23.10.2017 | Georgia Institute of Technology
Microfluidics probe 'cholesterol' of the oil industry
23.10.2017 | Rice University
Salmonellae are dangerous pathogens that enter the body via contaminated food and can cause severe infections. But these bacteria are also known to target...
University of Maryland researchers contribute to historic detection of gravitational waves and light created by event
On August 17, 2017, at 12:41:04 UTC, scientists made the first direct observation of a merger between two neutron stars--the dense, collapsed cores that remain...
Seven new papers describe the first-ever detection of light from a gravitational wave source. The event, caused by two neutron stars colliding and merging together, was dubbed GW170817 because it sent ripples through space-time that reached Earth on 2017 August 17. Around the world, hundreds of excited astronomers mobilized quickly and were able to observe the event using numerous telescopes, providing a wealth of new data.
Previous detections of gravitational waves have all involved the merger of two black holes, a feat that won the 2017 Nobel Prize in Physics earlier this month....
Material defects in end products can quickly result in failures in many areas of industry, and have a massive impact on the safe use of their products. This is why, in the field of quality assurance, intelligent, nondestructive sensor systems play a key role. They allow testing components and parts in a rapid and cost-efficient manner without destroying the actual product or changing its surface. Experts from the Fraunhofer IZFP in Saarbrücken will be presenting two exhibits at the Blechexpo in Stuttgart from 7–10 November 2017 that allow fast, reliable, and automated characterization of materials and detection of defects (Hall 5, Booth 5306).
When quality testing uses time-consuming destructive test methods, it can result in enormous costs due to damaging or destroying the products. And given that...
Using a new cooling technique MPQ scientists succeed at observing collisions in a dense beam of cold and slow dipolar molecules.
How do chemical reactions proceed at extremely low temperatures? The answer requires the investigation of molecular samples that are cold, dense, and slow at...
23.10.2017 | Event News
17.10.2017 | Event News
10.10.2017 | Event News
23.10.2017 | Life Sciences
23.10.2017 | Physics and Astronomy
23.10.2017 | Health and Medicine