Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

"Start-ups and spin-offs funding – Public and private policies", 14th October 2014

12.09.2014

A conference on "Start-ups and spin-offs funding – Public and private policies" will be held on Tuesday, October 14th, 2014 at the Embassy of France in Berlin. The aim of this conference is to present the best practices implemented in France and Germany in this sector. Thus, the conference will bring together representatives of national and European institutions, as well as companies.

This conference, which will take place from 10:00 am to 7:30pm, includes keynotes given by high level speakers, among them:

- Mrs. Axelle Lemaire, State Secretary for Digital Affairs at the French Ministry of the Economy, Industry and Digital Sector
- Mrs. Brigitte Zypries, Parliamentary State Secretary at the Federal Ministry for Economic Affairs and Energy
- Dr. Ute Günther, President of the German Business Angels Network
- Mr. Denis Gautheret, Vice-President Alliances & Business, Deutsche Telekom AG
- Mr. Nicolas Lesur, President of Financement Participatif France
- Mr. Denis Bartelt, CEO Startnext, Startnext Crowdfunding UG
- Mr. Eric Sebellin Air Liquide
- Pr. Alexander Kritikos Head of Markets and Competition Department, German Institute for Economic Research (DIW Berlin)

This conference is free of charge and will be held in English.

... more about:
»CEO »DIW »Digital »Energy »Registration »Start-ups

Registration & up-to-date program: www.science-allemagne.fr/fr/berlin-innovation-2014/. The number of seats is limited to 200, a confirmation of your registration containing a personal invitation will be sent to you.

Should you need further information, please contact: science.berlin-amba@diplomatie.gouv.fr

Weitere Informationen:

http://www.science-allemagne.fr/fr/berlin-innovation-2014/

Marie de Chalup | idw - Informationsdienst Wissenschaft

Further reports about: CEO DIW Digital Energy Registration Start-ups

More articles from Event News:

nachricht Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting
13.02.2017 | Kuratorium für die Tagungen der Nobelpreisträger in Lindau e.V.

nachricht Complex Loading versus Hidden Reserves
10.02.2017 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit LBF

All articles from Event News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

New pop-up strategy inspired by cuts, not folds

27.02.2017 | Materials Sciences

Sandia uses confined nanoparticles to improve hydrogen storage materials performance

27.02.2017 | Interdisciplinary Research

Decoding the genome's cryptic language

27.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>