Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Consumer Research - ICCR 2014

07.08.2014

Last chance to benefit from Early Bird Registration

Register now (before 14 August 2014) to the international conference on “Challenges for Consumer Research and Consumer Policy in Europe”, September 29-30 2014 in Bonn (Germany)!

This is the last chance to benefit from the early bird conference fee – 100,- € (student fee 50,- €) instead of 200,- € (100,- €).

Online registration is open at https://lcem.lab-concepts.de/registration/iccr2014/en.

The updated schedule at is available at http://www.vz-nrw.de/iccr.

Follow the conference on Twitter (#ICCR2014).

ICCR 2014 brings together state-of-the-art research and supports seminal, multidisciplinary research perspectives for Consumer Research and Consumer Policy in Europe. Hosted by the Competence Center of Consumer Research North Rhine-Westphalia (CECORE NRW), a think tank connecting researchers in Germany’s biggest state and beyond, the conference features roundtable discussions with participants from politics, the media, and a wide range of academic disciplines (such as sociology, political science, economics, lax, psychology, history, etc.).

Amongst other important officials from the European Union and other national governments, Svenja Schulze, Minister of Innovation, Science and Research and Johannes Remmel, Minister for Climate Protection, Environment, Agriculture, Nature Conservation and Consumer Protection of North Rhine-Westphalia will address the conference to foster networks of researchers, funding agencies, and government officials.

Consumer research is in charge to unfold its interdisciplinary potential without sacrificing specific research foci and approaches from different disciplines – therefore please do not hesitate to forward this information to persons interested in the mentioned issues or publish it in your networks, newsletters and social media!

The conference will be held at RCC Regional Museum | LVR-LandesMuseum Bonn, Colmantstr. 14-16, 53113 Bonn, Germany. Please note that the organiser does not assume any costs for your trip or your stay in Bonn.

If you have any further questions, please do not hesitate to contact the conference management:
lab concepts
on behalf of Verbraucherzentrale NRW (Consumer Association of North
Rhine-Westphalia)
Am Hofgarten 18
53113 Bonn, Germany
Phone: +49 (0) 228-24 98 118
Fax: +49 (0) 228-24 98 111
E-Mail: ICCR2014@lab-concepts.de

We are looking forward to welcoming you in Bonn!

Weitere Informationen:

http://www.vz-nrw.de/iccr-schedule - Schedule (up-to-date information)
https://lcem.lab-concepts.de/registration/iccr2014/en - Online registration
http://www.vz-nrw.de/iccr - ICCR 2014 on the web
http://www.landesmuseum-bonn.lvr.de/de/startseite.html - Venue (RCC Regional Museum | LVR-LandesMuseum Bonn)
http://www.bonn-region.de/ICCR2014 - Hotel reservation

Dr. Christian Bala | idw - Informationsdienst Wissenschaft

Further reports about: Climate Conservation Consumer Kompetenzzentrum Protection RCC networks

More articles from Event News:

nachricht Experts from industry and academia discuss the future mobile telecommunications standard 5G
23.09.2016 | Universität Kassel

nachricht ICPE in Graz for the seventh time
20.09.2016 | Research Center Pharmaceutical Engineering GmbH

All articles from Event News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Custom-tailored strategy against glioblastomas

26.09.2016 | Health and Medicine

Cooling buildings with solar heat

26.09.2016 | Power and Electrical Engineering

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>