Ecologists conducting field research usually study areas that they hope won't be disturbed for a while. But in an article published in the November issue of BioScience, "Mapping the Design Process for Urban Ecology Researchers," Alexander Felson of Yale University and his colleagues describe how ecologists can perform hypothesis-driven research from the start of design through the construction and monitoring phases of major urban projects. The results from such "designed experiments" can provide site-specific data that improve how the projects are conceptualized, built and subsequently monitored.
In light of the billions of dollars spent each year on urban construction, Felson and his coauthors see important potential in improving its environmental benefits and minimizing its harms. Currently, environmental consultants advising on the designs for such projects usually rely on available knowledge and principles that were originally tested in natural settings.
The authors note that researchers must understand contracting, then work to establish their credentials with project designers and their clients to be awarded a recognized role in a construction project. Felson and colleagues therefore provide maps of the process for researchers' benefit. Ecologist researchers should try to involve themselves at the earliest stages, even before designing starts, and be ready to accept priorities that are alien to typical research settings.
Felson and his colleagues provide two case studies to show how it can be done.
One is the construction of a "green" parking lot and associated water gardens at an environmental center in New Jersey, the other a major tree-planting project in New York City. In both cases, researchers involved themselves during the contract phases of the projects by establishing the likely value of answering research questions. Although they had to make some compromises with commercial and political imperatives, the designed experiments undertaken allowed researchers to influence the design and implementation and improve environmental benefits, while also establishing viable long-term research sites in highly urbanized areas
BioScience, published monthly, is the journal of the American Institute of Biological Sciences (AIBS. BioScience is a forum for integrating the life sciences that publishes commentary and peer-reviewed articles. The journal has been published since 1964. AIBS is a meta-level organization for professional scientific societies and organizations that are involved with biology. It represents nearly 160 member societies and organizations. The overview article by Felson and colleagues ("Mapping the Design Process for Urban Ecology Researchers") can be accessed ahead of print as an uncorrected proof at http://www.aibs.org/BioScience-press-releases/ until early November.
The complete list of peer-reviewed articles in the November 2013 issue of BioScience is as follows. These are now published ahead of print.
Mapping the Design Process for Urban Ecology Researchers by Alexander J. Felson, Mitchell Pavao-Zuckerman, Timothy Carter, Franco Montalto, Bill Shuster, Nikki Springer, Emilie K. Stander, and Olyssa Starry
The Impacts of Changing Disturbance Regimes on Serotinous Plant Populations and Communities by Brian Buma, Carissa D. Brown, Dan C. Donato, Joseph B. Fontaine, and Jill F. Johnstone
Autocatalytic Sets: From the Origin of Life to the Economy by Wim Hordijk
Involving Ecologists in Shaping Large-Scale Green Infrastructure Projects by Alexander J. Felson, Emily E. Oldfield, and Mark A. Bradford
Next-Generation Field Guides by Elizabeth J. Farnsworth, Miyoko Chu, W. John Kress, Amanda K. Neill, Jason H. Best, John Pickering, Robert D. Stevenson, Gregory W. Courtney, John K. VanDyk, and Aaron M. Ellison
Tim Beardsley | EurekAlert!
Upcycling 'fast fashion' to reduce waste and pollution
03.04.2017 | American Chemical Society
Litter is present throughout the world’s oceans: 1,220 species affected
27.03.2017 | Alfred-Wegener-Institut, Helmholtz-Zentrum für Polar- und Meeresforschung
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
28.04.2017 | Event News
20.04.2017 | Event News
18.04.2017 | Event News
28.04.2017 | Medical Engineering
28.04.2017 | Earth Sciences
28.04.2017 | Life Sciences