Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

University study shows low radiological risk to the public around atomic sites

07.08.2002


A study team led by experts at the University of Southampton has found that there is no significant risk to the public from radioactive contamination from the Atomic Weapons Establishments at Aldermaston and Burghfield in West Berkshire.



The three-year environmental radioactivity project, carried out by the University’s Geosciences Advisory Unit at the Southampton Oceanography Centre, examined over 600 soil and other samples from a wide variety of locations and environments.

Doctor Ian Croudace, who led the study said: ‘The results show the integrated effect of past depositions from the AWE sites. Only minute quantities of Uranium and Plutonium have been transferred to the environment in spite of the Plants having a history ranging from the early Fifties, through the Cold War period to the present day. The minute quantities, found using highly sensitive methods, are not considered to pose a hazard to the public.’


‘The very small amounts of contamination are predominantly found within 2.5 kilometres of the main AWE site at Aldermaston and are mostly confined to woodland sites.’

The Atomic Weapons Establishments at Aldermaston and Burghfield in West Berkshire have been the centres of the UK nuclear defence programme since the early 1950s. This latest study was to assess the distribution and magnitude of any AWE-derived contamination of uranium and plutonium.

A highly sensitive and precise method, using the Southampton Oceanography Centre’s multi-collector plasma mass spectrometer, was employed to examine isotopic compositions in soil samples collected around the two nuclear sites to decide how much contamination there was and where it came from. Possible sources were either AWE or the atmospheric weapons fallout that mostly occurred from 1952-1963.

Contamination of the environment around nuclear facilities by uranium and plutonium has potentially significant environmental and political consequences. The situation around the two weapons sites in West Berkshire has been a cause for public concern for several decades partly because of reports of leukaemia clusters. Even though assessments in the past have concluded that the environmental and radiological impact of the sites has been small, some public concern remained.

To try to abate these worries the AWE management decided it would fund a completely independent study which commenced in 1998 and produced three technical reports (Croudace et al. 1999, 2000b, 2002) and three lay leaflets.



Sarah Watts | alfa

More articles from Ecology, The Environment and Conservation:

nachricht How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)

nachricht Quantifying the chemical effects of air pollutants on oxidative stress and human health
12.09.2016 | Max-Planck-Institut für Chemie

All articles from Ecology, The Environment and Conservation >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Stronger turbine blades with molybdenum silicides

26.09.2016 | Materials Sciences

Scientists Find Twisting 3-D Raceway for Electrons in Nanoscale Crystal Slices

26.09.2016 | Materials Sciences

Lowering the Heat Makes New Materials Possible While Saving Energy

26.09.2016 | Materials Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>