Researchers have detected common plant toxins that affect human health and ecosystems in smoke from forest fires. The results from the new study also suggest that smoldering fires may produce more toxins than wildfires - a reason to keep human exposures to a minimum during controlled burns.
Finding these toxins -- known as alkaloids -- helps researchers understand how they cycle through earth and air. Smoke-related alkaloids in the environment can change aquatic and terrestrial ecosystems, as well as where and when clouds form. The study, which was of Ponderosa pines, by scientists at the Department of Energy's Pacific Northwest National Laboratory will appear June 1 in Environmental Science and Technology.
"Ponderosa pines are widespread in areas that are prone to forest fires," said PNNL physical chemist Julia Laskin, one of the coauthors. "This study shows us which molecules are in smoke so we can better understand smoke's environmental impact."
As trees and underbrush burn, billowing smoke made up of tiny particles drifts away. The tiny particles contain a variety of natural compounds released from the plant matter. Researchers have long suspected the presence of alkaloids in smoke or detected them in air during fire season, but no one had directly measured them coming off a fire. The PNNL researchers had recently developed the technology to pick out alkaloids from the background of similar molecules.
To investigate chemicals given off by fires, the team captured some smoke from test fires organized by Colorado State University researchers. These researchers were doing controlled burns of ponderosa pines, underbrush and other fuels at the Forest Service Fire Science Laboratory in Missoula, Mont.
The scientists collected smoke samples in a device that corrals small particles. Using high-resolution spectrometry instruments in EMSL, DOE's Environmental Molecular Sciences Laboratory on the PNNL campus, they then determined which molecules the smoke contained. At EMSL, the researchers used the new methods to glean highly detailed information about the smoke's composition.
The team found a wide variety of molecules. When they compared their results to other studies, they found that 70 percent of these molecules had not been previously reported in smoke.
"The research significantly expanded the previous observations," said aerosol chemist and coauthor Alexander Laskin.
In addition, 10 to 30 percent of these were alkaloids, common plant molecules that proved to be quite resistant to the high temperatures of fire. Plants often use alkaloids for protection, because they can poison other plants and animals, including humans. Alkaloids also have medicinal value (caffeine and nicotine, for example, are well-known alkaloids that aren't found in pine trees).
A large percentage of the alkaloids were those that carry biologically useful nitrogen through atmospheric, terrestrial and aquatic environments. Because of this, the results suggest smoke might be an important step in this transport. Also, the nitrogen-containing alkaloids have a basic pH, which can make cloud-forming particles less acidic, and in turn impact cloud formation that is critical to global agriculture and water supplies.
The researchers also found that the abundance of alkaloids depends on how vigorously the fire burns. Smoldering fires such as those in controlled burns produce more of the compounds than blazing fires such as those fanned by high winds. Because some plant alkaloids might be harmful, the result could affect planned fires upwind of human populations.
For future studies, the researchers are developing a method to quantify the alkaloids and related compounds in smoke to better understand their chemical composition and prevalence.
A Laskin, J Smith, and J Laskin. 2009. "Molecular Characterization of Nitrogen Containing Organic Compounds in Biomass Burning Aerosols Using High Resolution Mass Spectrometry." Environmental Science and Technology. DOI: 10.1021/es803456n.
This work was funded by the DOE Office of Science through the Office of Basic Energy Sciences, the Office of Biological and Environmental Research, and the Science Undergraduate Laboratory Internship program.
EMSL, the Environmental Molecular Sciences Laboratory (www.emsl.pnl.gov), is a national scientific user facility sponsored by the Department of Energy's Office of Science, Biological and Environmental Research program that is located at Pacific Northwest National Laboratory. EMSL offers an open, collaborative environment for scientific discovery to researchers around the world. EMSL's technical experts and suite of custom and advanced instruments are unmatched. Its integrated computational and experimental capabilities enable researchers to realize fundamental scientific insights and create new technologies.
Pacific Northwest National Laboratory (www.pnl.gov) is a Department of Energy Office of Science national laboratory where interdisciplinary teams advance science and technology and deliver solutions to America's most intractable problems in energy, national security and the environment. PNNL employs 4,250 staff, has a $918 million annual budget, and has been managed by Ohio-based Battelle since the lab's inception in 1965. Follow PNNL on Facebook, Linked In and Twitter.
Further reports about: > Chemical > EMSL > Environmental Research > Laboratory > Molecular Target > PNNL > Smoke > Smoldering ponderosa pine fires > alkaloids > aquatic and terrestrial ecosystems > ecosystems > environmental risk > fire season > forest fires > high-resolution spectrometry instruments > nitrogen-containing alkaloids > pine tree
Upcycling 'fast fashion' to reduce waste and pollution
03.04.2017 | American Chemical Society
Litter is present throughout the world’s oceans: 1,220 species affected
27.03.2017 | Alfred-Wegener-Institut, Helmholtz-Zentrum für Polar- und Meeresforschung
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
28.04.2017 | Event News
20.04.2017 | Event News
18.04.2017 | Event News
28.04.2017 | Medical Engineering
28.04.2017 | Earth Sciences
28.04.2017 | Life Sciences