Want to conserve water and save on your utility bill? A paper co-written by an Indiana University researcher and published in the current issue of the journal Environment can help.
"The Water Short List: The Most Effective Actions U.S. Households Can Take to Curb Water Use" describes how households can reduce water use substantially by simple actions such as installing more efficient appliances and changing day-to-day habits involving water consumption. While the suggestions may be familiar, the researchers are the first to put a comprehensive, quantitative estimate on the amount of water savings available to a typical household. They also find that some frequently discussed conservation steps actually consume more water than they save.
Authors of the Environment cover article are Benjamin D. Inskeep, an energy policy analyst with the N.C. Clean Energy Technology Center at North Carolina State University, and Shahzeen Z. Attari, assistant professor in the School of Public and Environmental Affairs at IU Bloomington. Inskeep recently completed a master's degree at the School of Public and Environmental Affairs.
"As water availability is expected to become an increasingly urgent issue in the coming decades," they write, "it is heartening to find that substantial reductions in household water use are readily available to U.S. households."
Inskeep and Attari address potential savings of both indoor and outdoor water use, focusing on efficiency improvements though one-time technology upgrades as well as curtailment actions. Drawing on data from the Water Research Association and the U.S. Geological Survey, they estimate indoor water consumption can be reduced by 45 percent through efficiency actions such as installing efficient toilets, washing machines, dishwashers, showerheads and faucets. For example, replacing a standard toilet with a WaterSense-labeled toilet could save a family a whopping 18 percent of the water they consume.
Households can reduce indoor water consumption by 30 percent, they say, by implementing curtailment actions such as reducing toilet flushes by a quarter, only washing full loads of clothes and taking shorter showers.
Outdoor water use can be reduced or nearly eliminated by watering turf grass less often, using a rain barrel or other rain-harvesting system, watering all plants in the morning, replacing cool-season grass with warm-season grass that requires less watering, and installing drip irrigation systems.
Not all water-saving tips actually produce savings. For example, one conservation campaign suggests “washing your face or brushing your teeth while in the shower.” The researchers say it would be far smarter to do those activities at the sink since a typical faucet uses far less water than a showerhead.
The article follows a paper that Attari published in March, which found Americans have little idea how much water is used by various activities. It is based on "The Short List," an influential 2009 Environment article authored by Gerald Gardner and Paul Stern, who analyzed the best ways to reduce energy consumption and address climate change.
Inskeep and Attari note that water availability is a rising concern in the U.S., with many cities expected to face shortages in the 21st century. Americans use an average of 98 gallons of water per day, seven times what's required to meet daily needs. Yet water is cheap, so there's little incentive to conserve. Installing more efficient appliances and fixtures can produce savings, but up-front costs deter many consumers.
Regarding conservation policies, the authors write that "command and control" approaches, such as mandatory water restrictions, can be effective but are typically unpopular. They suggest market-based approaches, such as setting water rates closer to the long-run marginal cost of supply, offering bigger rebates on efficient appliances and providing consumers with more information.
An editorial by Environment executive editor Timothy O'Riordan highlights the Inskeep-Attari article and discusses the relationship between climate change and water availability and the challenges associated with changing behavior when there aren't short-term incentives to do so.
Steve Hinnefeld | Eurek Alert!
How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)
Quantifying the chemical effects of air pollutants on oxidative stress and human health
12.09.2016 | Max-Planck-Institut für Chemie
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
26.09.2016 | Physics and Astronomy
26.09.2016 | Physics and Astronomy
26.09.2016 | Life Sciences