Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Industrial rack PC with performance boost

20.09.2013
• Latest PC technology with performance boost for 19-inch industrial rack PC
• Low power loss, high computing and graphics performance
• High system availability and data security
• Flexible use as workstation or server

The Siemens Industry Automation Division has equipped its new 19-inch industrial rack PC, Simatic IPC547E, with powerful fourth generation Intel Core processors and the latest PC technology.


Industrial rack PC with performance boost

Core i7 four-core processor, HD onboard graphics and fast work memory reduce the power loss by one third as compared to the previous version and offer 30% higher computing performance and almost three times better graphics performance. Raid hard disk configuration with additional hot spare hard disk and automatic restore in the event of a fault guarantee high system availability and data security.

Up to five monitors/displays can be connected for control centers and multi-monitoring applications. The new industrial PC is particularly suitable for use as a compact workstation or server for the fast acquisition and processing of large data volumes, for example in industrial image processing and process visualization.

The new rack PC Simatic IPC547E is compatible with its predecessor model in terms of installation, interfacing and software. The minimal housing depth of 446 millimeters allows for space-saving installation in 19-inch control cabinets with depths from 500 millimeters. A version with a housing depth of 356 millimeters will be available soon for control cabinets from 400 millimeters. Thanks to the many integrated interfaces, such as DisplayPort V1.2, PCIe 3.0 or USB 3.0, the industrial PC is particularly flexible. For efficient diagnostics, the device features status LEDs on the front for fan, temperature and hard disks in the raid network, as well as diagnostics software included in the scope of supply. The user can utilize the Intel Active Management Technology (Intel AMT 9.0) already integrated in the processors for password-protected remote access, to facilitate remote diagnostics or maintenance, for example.

On request, the rack PC can be supplied with the pre-installed and activated Windows 7 Ultimate (32 and 64-bit) operating system or Windows Server 2008 R2 (64-bit). Versions with Windows 8 (64-bit) are currently in development. Supplementary software packages for control and visualization solutions with server and Scada functionality are available.

Follow us on Twitter: www.twitter.com/siemens_press

The Siemens Industry Sector (Erlangen, Germany) is the world's leading supplier of innovative and environmentally friendly products and solutions for industrial customers. With end-to-end automation technology and industrial software, solid vertical-market expertise, and technology-based services, the Sector enhances its customers' productivity, efficiency, and flexibility. With a global workforce of more than 100,000 employees, the Industry Sector comprises the Divisions Industry Automation, Drive Technologies and Customer Services as well as the Business Unit Metals Technologies. For more information, visit http://www.siemens.com/industry

The Siemens Industry Automation Division (Nuremberg, Germany) supports the entire value chain of its industrial customers – from product design to production and services – with an unmatched combination of automation technology, industrial control technology, and industrial software. With its software solutions, the Division can shorten the time-to-market of new products by up to 50 percent. Industry Automation comprises five Business Units: Industrial Automation Systems, Control Components and Systems Engineering, Sensors and Communications, Siemens PLM Software, and Water Technologies. For more information, visit http://www.siemens.com/industryautomation

Reference Number: IIA2013093315e

Contact
Mr. Gerhard Stauss
Industry Automation Division
Siemens AG
Gleiwitzerstr. 555
90475 Nuremberg
Germany
Tel: +49 (911) 895-7945
gerhard.stauss​@siemens.com

Gerhard Stauss | Siemens Industry
Further information:
http://www.siemens.com/simatic-ipc

More articles from Machine Engineering:

nachricht LZH optimizes laser-based CFRP reworking for the aircraft industry
24.11.2016 | Laser Zentrum Hannover e.V.

nachricht eldec generators CUSTOM LINE: Customized energy source for perfect induction heating
23.11.2016 | EMAG eldec Induction GmbH

All articles from Machine Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Electron highway inside crystal

Physicists of the University of Würzburg have made an astonishing discovery in a specific type of topological insulators. The effect is due to the structure of the materials used. The researchers have now published their work in the journal Science.

Topological insulators are currently the hot topic in physics according to the newspaper Neue Zürcher Zeitung. Only a few weeks ago, their importance was...

Im Focus: Significantly more productivity in USP lasers

In recent years, lasers with ultrashort pulses (USP) down to the femtosecond range have become established on an industrial scale. They could advance some applications with the much-lauded “cold ablation” – if that meant they would then achieve more throughput. A new generation of process engineering that will address this issue in particular will be discussed at the “4th UKP Workshop – Ultrafast Laser Technology” in April 2017.

Even back in the 1990s, scientists were comparing materials processing with nanosecond, picosecond and femtosesecond pulses. The result was surprising:...

Im Focus: Shape matters when light meets atom

Mapping the interaction of a single atom with a single photon may inform design of quantum devices

Have you ever wondered how you see the world? Vision is about photons of light, which are packets of energy, interacting with the atoms or molecules in what...

Im Focus: Novel silicon etching technique crafts 3-D gradient refractive index micro-optics

A multi-institutional research collaboration has created a novel approach for fabricating three-dimensional micro-optics through the shape-defined formation of porous silicon (PSi), with broad impacts in integrated optoelectronics, imaging, and photovoltaics.

Working with colleagues at Stanford and The Dow Chemical Company, researchers at the University of Illinois at Urbana-Champaign fabricated 3-D birefringent...

Im Focus: Quantum Particles Form Droplets

In experiments with magnetic atoms conducted at extremely low temperatures, scientists have demonstrated a unique phase of matter: The atoms form a new type of quantum liquid or quantum droplet state. These so called quantum droplets may preserve their form in absence of external confinement because of quantum effects. The joint team of experimental physicists from Innsbruck and theoretical physicists from Hannover report on their findings in the journal Physical Review X.

“Our Quantum droplets are in the gas phase but they still drop like a rock,” explains experimental physicist Francesca Ferlaino when talking about the...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ICTM Conference 2017: Production technology for turbomachine manufacturing of the future

16.11.2016 | Event News

Innovation Day Laser Technology – Laser Additive Manufacturing

01.11.2016 | Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

 
Latest News

Researchers identify potentially druggable mutant p53 proteins that promote cancer growth

09.12.2016 | Life Sciences

Scientists produce a new roadmap for guiding development & conservation in the Amazon

09.12.2016 | Ecology, The Environment and Conservation

Satellites, airport visibility readings shed light on troops' exposure to air pollution

09.12.2016 | Health and Medicine

VideoLinks
B2B-VideoLinks
More VideoLinks >>>