According to the ASME report, 2028 Vision for Mechanical Engineering, mechanical engineers will need to collaborate with partners worldwide in order to apply innovative solutions and best practices to improve quality of life for all people.
“Mechanical engineers can be at the forefront of developing new technology for environmental remediation, farming and food production, housing, transportation, safety, security, healthcare and water resources,” says the report, which is based on the proceedings of The Global Summit on the Future of Mechanical Engineering, held April 16-18, 2008, Washington, D.C. The summit, hosted by ASME at the U.S. National Academy of Engineering, convened more than 120 engineering and science leaders from 19 countries for the purpose of defining the elements of a shared vision that will keep the profession at the forefront of grand challenges and great contributions over the next 20 years.
Among the challenges, sustainable development, says the ASME report, will be a shared vision in the worldwide technical community, involving collaboration tools that allow “mechanical engineers to tap into the collective wisdom of an organization or network of stakeholders.”
Collaboration also will facilitate the development of innovations in nanotechnology, biotechnology, and large-scale systems. According to the report, nanotechnology and biotechnology will dominate technological development in the next 20 years and will be incorporated into all aspects of technology that affect lives on a daily basis. “Nano-bio will provide the building blocks that future engineers will use to solve pressing problems in diverse fields including medicine, energy, water management, aeronautics, agriculture and environmental management.”
Other topics examined at the summit and discussed in the report include intellectual property, engineering education and lifelong learning, diversity, virtual design environments, and home-based fabrication.
“Engineers will be able to act as independent operators interacting with colleagues around the world,” the report says. “Engineers can design at home with advanced CAD systems or in collaboration with their global colleagues in virtual worlds. They will be able to use home-based fabrication technology to test many of their designs.”
The report said “As mechanical engineering looks to 2028, leaders will value people with diverse expertise and experience. They will bring this global profession together to keep the promise of technology serving people. They will inspire men and women everywhere to believe that grand challenges are a rally cry for a profession that is ready for the adventure of making the difficult doable.”
The full report, 2028 Vision for Mechanical Engineering, is available online at http://www.asmeconferences.org/asmeglobalsummit/index.cfm
Founded in 1880 as the American Society of Mechanical Engineers, ASME is a not-for-profit professional organization promoting the art, science and practice of mechanical and multidisciplinary engineering and allied sciences. ASME develops codes and standards that enhance public safety, and provides lifelong learning and technical exchange opportunities benefiting the engineering and technology community.
John Varrasi | Source: Newswise Science News
Further information: www.asme.org
Further Reports about: Biotechnology > Engineering > environmental management > environmental remediation > food production > global environment > innovative solutions > Mechanical Engineering > Nanotechnology > water resources > worldwide technical community
More articles from Machine Engineering:
Efficient precision grinding of machine components
10.06.2013 | Fachinformationszentrum Karlsruhe
Factories of the future: Mobile manipulators for aerospace production
29.04.2013 | Fraunhofer-Institut für Fabrikbetrieb und -automatisierung IFF
... two engines aircraft project “Elektro E6”.
The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.
EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...
Siemens scientists have developed new kinds of ceramics in which they can embed transformers.
The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.
The new technology was developed in cooperation with industrial and research partners who ...
Cheaper clean-energy technologies could be made possible thanks to a new discovery.
Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...
The Fraunhofer Institute for Laser Technology ILT generated a lot of interest at the LASER World of Photonics 2013 trade fair with its numerous industrial laser technology innovations.
Its highlights included beam sources and manufacturing processes for ultrashort laser pulses as well as ways to systematically optimize machining processes using computer simulations. There was even a specialist booth at the fair dedicated to the revolutionary technological potential of digital photonic production.
Now in its fortieth year, LASER World ...
It's not reruns of "The Jetsons", but researchers working at the National Institute of Standards and Technology (NIST) have developed a new microscopy technique that uses a process similar to how an old tube television produces a picture—cathodoluminescence—to image nanoscale features.
Combining the best features of optical and scanning electron microscopy, the fast, versatile, and high-resolution technique allows scientists to view surface and subsurface features potentially as small as 10 nanometers in size.
The new microscopy technique, described in the journal AIP Advances,* uses a beam of electrons to excite a specially ...
18.06.2013 | Materials Sciences
18.06.2013 | Health and Medicine
18.06.2013 | Life Sciences
14.06.2013 | Event News
13.06.2013 | Event News
10.06.2013 | Event News