There has always been a need to efficiently carry more people and more cargo. And so the science and engineering of getting large aircraft off the ground is very well understood.
But what about flight at a small scale? Say the scale of a dragonfly, a bird or a bat?
Hui Hu, an Iowa State University associate professor of aerospace engineering, said there hasn’t been a need to understand the airflow, the eddies and the spinning vortices created by flapping wings and so there haven’t been many engineering studies of small-scale flight. But that’s changing.
The U.S. Air Force, for example, is interested in insect-sized nano-air vehicles or bird-sized micro-air vehicles. The vehicles could fly microphones, cameras, sensors, transmitters and even tiny weapons right through a terrorist’s doorway.
So how do you design a little flier that’s fast and agile as a house fly?
Hu says a good place to start is nature itself.
And so for a few years he’s been using wind tunnel tests and imaging technologies to learn why dragonflies and bats are such effective fliers. How, for example, do flapping frequency, flight speed and wing angle affect the lift and thrust of a flapping wing?
Hu’s studies of bio-inspired aerodynamic designs began in 2008 when he spent the summer on a faculty fellowship at the Air Force Research Laboratory at Eglin Air Force Base in Florida. Over the years he’s published papers describing aerodynamic performance of different kinds of flapping wings.
A study based on the dragonfly, for example, found the uneven, sawtooth surface of the insect’s wing performed better than a smooth airfoil in the slow-speed, high-drag conditions of small-scale flight. Using particle image velocimetry – an imaging technique that uses lasers and cameras to measure and record flows – Hu found the corrugated wing created tiny air cushions that kept oncoming airflow attached to the wing’s surface. That stable airflow helped boost performance in the challenging flight conditions. By describing the underlying physics of dragonfly flight, Hu and Jeffery Murphy, a former Iowa State graduate student, won a 2009 Best Paper Award in applied aerodynamics from the American Institute of Aeronautics and Astronautics.
Another study of bat-like wings found the built-in flexibility of membrane-covered wings helped decrease drag and improve flight performance.
And what about building tiny flying machines that use flapping wings? Can engineers come up with a reliable way to make that work?
Hu has been looking into that, too.
He’s using piezoelectrics, materials that bend when subject to an electric current, to create flapping movements. That way flapping depends on feeding current to a material, rather than relying on a motor, gears and other moving parts.
Hu has also used his wind tunnel and imaging tests to study how pairs of flapping wings work together – just like they do on a dragonfly. He learned wings flapping out of sync (one wing up while the second is down) created more thrust. And tandem wings working side by side, rather than top to bottom, maximize thrust and lift.
Hu said these kinds of physics and aerodynamics lessons – and many more – need to be learned before engineers can design effective nano- and micro-scale vehicles.
And so he’s getting students immersed in the studies.
Hu has won a $150,000, three-year National Science Foundation grant that sends up to 12 Iowa State students to China’s Shanghai Jiao Tong University for eight weeks of intensive summer research. The students work at the university’s J.C. Wu Aerodynamics Research Center to study bio-inspired aerodynamics and engineering problems.
“We’re just now learning what makes a dragonfly work,” Hu said. “There was no need to understand flight at these small scales. But now the Defense Advanced Research Projects Agency and the Air Force say there is a need and so there’s an effort to work on it. We’re figuring out many, many interesting things we didn’t know before.”
Hui Hu, Aerospace Engineering, 515-294-0094, email@example.com
Mike Krapfl, News Service, 515-294-4917, firstname.lastname@example.org
Mike Krapfl | Source: Newswise
Further information: www.iastate.edu
Further Reports about: Aerospace Engineering > Ambient Air > bat-like wings > bats > better flying machines > dragonflies > flapping movements > insect-sized nano-air vehicles > speed|scan atlineCT-System > wind tunnel
More articles from Machine Engineering:
Factories of the future: Mobile manipulators for aerospace production
29.04.2013 | Fraunhofer-Institut für Fabrikbetrieb und -automatisierung IFF
GRACE Improves Production and Product Quality
09.04.2013 | Siemens AG
This morning at 05:45 CEST, the earth trembled beneath the Okhotsk Sea in the Pacific Northwest. The quake, with a magnitude of 8.2, took place at an exceptional depth of 605 kilometers.
Because of the great depth of the earthquake a tsunami is not expected and there should also be no major damage due to shaking.
Professor Frederik Tilmann of the GFZ German Research Centre for Geosciences: "The epicenter is exceptionally deep, far below the earth's crust in the mantle. Such strong ...
The Ring Nebula's distinctive shape makes it a popular illustration for astronomy books. But new observations by NASA's Hubble Space Telescope of the glowing gas shroud around an old, dying, sun-like star reveal a new twist.
"The nebula is not like a bagel, but rather, it's like a jelly doughnut, because it's filled with material in the middle," said C. Robert O'Dell of Vanderbilt University in Nashville, Tenn.
He leads a research team that used Hubble and several ground-based telescopes to obtain the best view yet of ...
New indicator molecules visualise the activation of auto-aggressive T cells in the body as never before
Biological processes are generally based on events at the molecular and cellular level. To understand what happens in the course of infections, diseases or normal bodily functions, scientists would need to examine individual cells and their activity directly in the tissue.
The development of new microscopes and fluorescent dyes in ...
A fried breakfast food popular in Spain provided the inspiration for the development of doughnut-shaped droplets that may provide scientists with a new approach for studying fundamental issues in physics, mathematics and materials.
The doughnut-shaped droplets, a shape known as toroidal, are formed from two dissimilar liquids using a simple rotating stage and an injection needle. About a millimeter in overall size, the droplets are produced individually, their shapes maintained by a surrounding springy material made of polymers.
Droplets in this toroidal shape made ...
Frauhofer FEP will present a novel roll-to-roll manufacturing process for high-barriers and functional films for flexible displays at the SID DisplayWeek 2013 in Vancouver – the International showcase for the Display Industry.
Displays that are flexible and paper thin at the same time?! What might still seem like science fiction will be a major topic at the SID Display Week 2013 that currently takes place in Vancouver in Canada.
High manufacturing cost and a short lifetime are still a major obstacle on ...
24.05.2013 | Life Sciences
24.05.2013 | Ecology, The Environment and Conservation
24.05.2013 | Physics and Astronomy
17.05.2013 | Event News
15.05.2013 | Event News
08.05.2013 | Event News