Scientists and industry experts have long speculated that carbon nanotube transistors would one day replace their silicon predecessors. In 1998, Delft University built the world's first carbon nanotube transistors – carbon nanotubes have the potential to be far smaller, faster, and consume less power than silicon transistors.
A key reason carbon nanotubes are not in your computer right now is that they are difficult to manufacture in a predictable way. Scientists have had a difficult time controlling the manufacture of nanotubes to the correct diameter, type and ultimately chirality, factors that control nanotubes' electrical and mechanical properties.
Think of chirality like this: if you took a sheet of notebook paper and rolled it straight up into a tube, it would have a certain chirality. If you rolled that same sheet up at an angle, it would have a different chirality. In this example, the notebook paper represents a sheet of latticed carbon atoms that are rolled-up to create a nanotube.
A team led by Professor Chongwu Zhou of the USC Viterbi School of Engineering and Ming Zheng of the National Institute of Standards and Technology in Maryland solved the problem by inventing a system that consistently produces carbon nanotubes of a predictable diameter and chirality.
Zhou worked with his group members Jia Liu, Chuan Wang, Bilu Liu, Liang Chen, and Ming Zheng and Xiaomin Tu of the National Institute of Standards and Technology in Maryland.
"Controlling the chirality of carbon nanotubes has been a dream for many researchers. Now the dream has come true." said Zhou. The team has already patented its innovation, and its research will be published Nov. 13 in Nature Communications.
Carbon nanotubes are typically grown using a chemical vapor deposition (CVD) system in which a chemical-laced gas is pumped into a chamber containing substrates with metal catalyst nanoparticles, upon which the nanotubes grow. It is generally believed that the diameters of the nanotubes are determined by the size of the catalytic metal nanoparticles. However, attempts to control the catalysts in hopes of achieving chirality-controlled nanotube growth have not been successful.
The USC team's innovation was to jettison the catalyst and instead plant pieces of carbon nanotubes that have been separated and pre-selected based on chirality, using a nanotube separation technique developed and perfected by Zheng and his coworkers at NIST. Using those pieces as seeds, the team used chemical vapor deposition to extend the seeds to get much longer nanotubes, which were shown to have the same chirality as the seeds..
The process is referred to as "nanotube cloning." The next steps in the research will be to carefully study the mechanism of the nanotube growth in this system, to scale up the cloning process to get large quantities of chirality-controlled nanotubes, and to use those nanotubes for electronic applications
Funding of the USC team for this research came from the Semiconductor Research Corporation's Focus Research Program Functional Engineered Nano Architectonics center and the Office of Naval Research.
Robert Perkins | Source: EurekAlert!
Further information: www.usc.edu/
More articles from Power and Electrical Engineering:
Stop hyperventilating, say energy efficiency researchers
18.06.2013 | DOE/Pacific Northwest National Laboratory
A robot that runs like a cat
17.06.2013 | Ecole Polytechnique Fédérale de Lausanne
... two engines aircraft project “Elektro E6”.
The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.
EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...
Siemens scientists have developed new kinds of ceramics in which they can embed transformers.
The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.
The new technology was developed in cooperation with industrial and research partners who ...
Cheaper clean-energy technologies could be made possible thanks to a new discovery.
Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...
The Fraunhofer Institute for Laser Technology ILT generated a lot of interest at the LASER World of Photonics 2013 trade fair with its numerous industrial laser technology innovations.
Its highlights included beam sources and manufacturing processes for ultrashort laser pulses as well as ways to systematically optimize machining processes using computer simulations. There was even a specialist booth at the fair dedicated to the revolutionary technological potential of digital photonic production.
Now in its fortieth year, LASER World ...
It's not reruns of "The Jetsons", but researchers working at the National Institute of Standards and Technology (NIST) have developed a new microscopy technique that uses a process similar to how an old tube television produces a picture—cathodoluminescence—to image nanoscale features.
Combining the best features of optical and scanning electron microscopy, the fast, versatile, and high-resolution technique allows scientists to view surface and subsurface features potentially as small as 10 nanometers in size.
The new microscopy technique, described in the journal AIP Advances,* uses a beam of electrons to excite a specially ...
18.06.2013 | Materials Sciences
18.06.2013 | Health and Medicine
18.06.2013 | Life Sciences
14.06.2013 | Event News
13.06.2013 | Event News
10.06.2013 | Event News