Though still in its infancy, the research promises to convert sunlight into energy using a process based on metals that are more robust than many of the semiconductors used in conventional methods. The researchers' findings are published in the latest issue of the journal Nature Nanotechnology.
"It is the first radically new and potentially workable alternative to semiconductor-based solar conversion devices to be developed in the past 70 years or so," said Martin Moskovits, professor of chemistry at UCSB.
In conventional photoprocesses, a technology developed and used over the last century, sunlight hits the surface of semiconductor material, one side of which is electron-rich, while the other side is not. The photon, or light particle, excites the electrons, causing them to leave their postions, and create positively-charged "holes." The result is a current of charged particles that can be captured and delivered for various uses, including powering lightbulbs, charging batteries, or facilitating chemical reactions.
"For example, the electrons might cause hydrogen ions in water to be converted into hydrogen, a fuel, while the holes produce oxygen," said Moskovits.
In the technology developed by Moskovits and his team, it is not semiconductor materials that provide the electrons and venue for the conversion of solar energy, but nanostructured metals — a "forest" of gold nanorods, to be specific.
For this experiment, gold nanorods were capped with a layer of crystalline titanium dioxide decorated with platinum nanoparticles, and set in water. A cobalt-based oxidation catalyst was deposited on the lower portion of the array.
"When nanostructures, such as nanorods, of certain metals are exposed to visible light, the conduction electrons of the metal can be caused to oscillate collectively, absorbing a great deal of the light," said Moskovits. "This excitation is called a surface plasmon."
As the "hot" electrons in these plasmonic waves are excited by light particles, some travel up the nanorod, through a filter layer of crystalline titanium dioxide, and are captured by platinum particles. This causes the reaction that splits hydrogen ions from the bond that forms water. Meanwhile, the holes left behind by the excited electrons head toward the cobalt-based catalyst on the lower part of the rod to form oxygen.
According to the study, hydrogen production was clearly observable after about two hours. Additionally, the nanorods were not subject to the photocorrosion that often causes traditional semiconductor material to fail in minutes.
"The device operated with no hint of failure for many weeks," Moskovits said.
The plasmonic method of splitting water is currently less efficient and more costly than conventional photoprocesses, but if the last century of photovoltaic technology has shown anything, it is that continued research will improve on the cost and efficiency of this new method — and likely in far less time than it took for the semiconductor-based technology, said Moskovits.
"Despite the recentness of the discovery, we have already attained 'respectable' efficiencies. More importantly, we can imagine achievable strategies for improving the efficiencies radically," he said.
Research in this study was also performed by postdoctoral researchers Syed Mubeen and Joun Lee; grad student Nirala Singh; materials engineer Stephan Kraemer; and chemistry professor Galen Stucky.
Sonia Fernandez | Source: EurekAlert!
Further information: www.ucsb.edu
More articles from Power and Electrical Engineering:
Cradle turns smartphone into handheld biosensor
24.05.2013 | University of Illinois at Urbana-Champaign
Not Just Blowing in the Wind: Compressing Air for Renewable Energy Storage
22.05.2013 | Pacific Northwest National Laboratory
This morning at 05:45 CEST, the earth trembled beneath the Okhotsk Sea in the Pacific Northwest. The quake, with a magnitude of 8.2, took place at an exceptional depth of 605 kilometers.
Because of the great depth of the earthquake a tsunami is not expected and there should also be no major damage due to shaking.
Professor Frederik Tilmann of the GFZ German Research Centre for Geosciences: "The epicenter is exceptionally deep, far below the earth's crust in the mantle. Such strong ...
The Ring Nebula's distinctive shape makes it a popular illustration for astronomy books. But new observations by NASA's Hubble Space Telescope of the glowing gas shroud around an old, dying, sun-like star reveal a new twist.
"The nebula is not like a bagel, but rather, it's like a jelly doughnut, because it's filled with material in the middle," said C. Robert O'Dell of Vanderbilt University in Nashville, Tenn.
He leads a research team that used Hubble and several ground-based telescopes to obtain the best view yet of ...
New indicator molecules visualise the activation of auto-aggressive T cells in the body as never before
Biological processes are generally based on events at the molecular and cellular level. To understand what happens in the course of infections, diseases or normal bodily functions, scientists would need to examine individual cells and their activity directly in the tissue.
The development of new microscopes and fluorescent dyes in ...
A fried breakfast food popular in Spain provided the inspiration for the development of doughnut-shaped droplets that may provide scientists with a new approach for studying fundamental issues in physics, mathematics and materials.
The doughnut-shaped droplets, a shape known as toroidal, are formed from two dissimilar liquids using a simple rotating stage and an injection needle. About a millimeter in overall size, the droplets are produced individually, their shapes maintained by a surrounding springy material made of polymers.
Droplets in this toroidal shape made ...
Frauhofer FEP will present a novel roll-to-roll manufacturing process for high-barriers and functional films for flexible displays at the SID DisplayWeek 2013 in Vancouver – the International showcase for the Display Industry.
Displays that are flexible and paper thin at the same time?! What might still seem like science fiction will be a major topic at the SID Display Week 2013 that currently takes place in Vancouver in Canada.
High manufacturing cost and a short lifetime are still a major obstacle on ...
24.05.2013 | Life Sciences
24.05.2013 | Ecology, The Environment and Conservation
24.05.2013 | Physics and Astronomy
17.05.2013 | Event News
15.05.2013 | Event News
08.05.2013 | Event News