The Fraunhofer Institute for Industrial Engineering IAO is partner in the Robo-Mate project, starting in September 2013. Together with 11 European partners this research project aims at designing a human-guided exoskeleton to improve work safety and enhance productivity in the industrial environment.
Various manual work tasks necessary to industrial manufacturing processes are difficult to automate – even today – due to their complexity. This is particularly the case in assembling and dismantling operations, such as those used in the automotive or food processing industries. This type of work, however, entails severe risks of injury.
According to the Work Foundation Alliance (UK), as many as 44 million workers in the European Union are affected by work-place related musculoskeletal disorders (MSDs), representing a total annual cost of more than 240 billion Euros. To overcome these industrial and societal challenges, a new project, called Robo-Mate, has been designed.
Set to get underway in September 2013, the objective of the Robo-Mate project is to develop an intelligent, easy-to-manoeuvre, and wearable body exoskeleton for manual-handling work. The project comprises 12 partners from 7 European countries, including key players from industry and academia. The fundamental idea behind Robo-Mate is to enhance work conditions for load workers and facilitate repetitive lifting tasks, thereby reducing the incidence of work-place related injury and disease.
As a consequence, productivity, flexibility and the quality of production will increase. Bringing this concept to fruition involves merging human-guided manipulators with computer-controlled industrial robots in order to create a human-guided and computer-supported exoskeleton for use in various industries.
The development includes modelling and simulating the exoskeleton in a virtual-factory environment at the Fraunhofer Institute for Industrial Engineering IAO. Demonstrations of the prototype will be held at INDRA SAS – a French company in the vehicle recycling sector – and COMPA S. A. – a Romanian automotive components manufacturer. The Centro Ricerche Fiat (CRF) will test the exoskeleton in their lab and on the Fiat shop floor.
Putting the Robo-Mate exoskeleton into service will engender practical and far-reaching impacts, including making the industrial work-site safer for skilled personnel, providing a means for workers to apply less physical effort, and facilitating higher-quality outputs resulting in industrial benefit.
Funded with €4.5 million by the 7th Framework Programme for Research and Technological Development of the European Union (FP7), the 3-year project will be led by Prof. Dr. Hans Wernher van de Venn, Zurich University of Applied Science (ZHAW), and managed by accelopment AG in Switzerland.
Juliane Segedi | Source: Fraunhofer-Institut
Further Reports about: computer-controlled industrial robots > computer-supported exoskeleton > European Union > Ferchau Engineering > Fraunhofer Institut > IAO > Industrial Supply > manufacturing process > Robo-Mate > Robo-Mate exoskeleton > simulating the exoskeleton
More articles from Power and Electrical Engineering:
Harvesting Electricity: Triboelectric Generators Capture Wasted Power
10.12.2013 | Georgia Institute of Technology
Scientists discover quick recipe for producing hydrogen
09.12.2013 | Deep Carbon Observatory
Researchers from Brown University and the University of Hawaii have found some mineralogical surprises in the Moon's largest impact crater.
Data from the Moon Mineralogy Mapper that flew aboard India's Chandrayaan-1 lunar orbiter shows a diverse mineralogy in the subsurface of the giant South Pole Aitken basin.
The differing mineral signatures could be reflective of the minerals dredged up at the time of the giant impact 4 billion years ago, ...
In power electronics systems bonded connections create the central electrical connections between adjoining surfaces.
The quality of these bonded connections is one of the main factors that determines the reliability and availability of drive systems in electric vehicles, and hence constitutes a major design challenge for German auto manufacturers aiming to electrify their vehicles.
Now the partners participating in the RoBE (Robust Bonds in ...
International team of scientists develops new feedback method for optimizing the laser pulse shapes used in the control of chemical reactions
In many ways, traditional chemical synthesis is similar to cooking. To alter the final product, you can change the ingredients or their ratio, change the method of mixing ingredients, or change the temperature or pressure of the environment of the ingredients.
Like an accomplished chef, chemists have become very skilled ...
A genetic defect protects mice from infection with influenza viruses
A new study published in the scientific journal PLOS Pathogens points out that mice lacking a protein called Tmprss2 are no longer affected by certain flu viruses.
The discovery was made by researchers from the Helmholtz Centre for Infection Research (HZI) in Braunschweig in collaboration with colleagues from Göttingen and ...
The Light: Global study gets underway with online user survey
Light has a fundamental impact on our sense of well-being and performance. In cooperation with Zumtobel, a supplier of lighting solutions, Fraunhofer IAO has launched a global user survey of lighting quality in offices. The objective is to identify the best lighting conditions for a variety of spaces and lighting ...
10.12.2013 | Physics and Astronomy
10.12.2013 | Agricultural and Forestry Science
10.12.2013 | Power and Electrical Engineering
10.12.2013 | Event News
05.12.2013 | Event News
04.12.2013 | Event News