Commercial uses for ultraviolet (UV) light are growing, and now a new kind of LED under development at The Ohio State University could lead to more portable and low-cost uses of the technology.
The patent-pending LED creates a more precise wavelength of UV light than today’s commercially available UV LEDs, and runs at much lower voltages and is more compact than other experimental methods for creating precise wavelength UV light.
The LED could lend itself to applications for chemical detection, disinfection, and UV curing. With significant further development, it might someday be able to provide a source for UV lasers for eye surgery and computer chip manufacture.
In the journal Applied Physics Letters, Ohio State engineers describe how they created LEDs out of semiconductor nanowires which were doped with the rare earth element gadolinium.
The unique design enabled the engineers to excite the rare earth metal by passing electricity through the nanowires, said study co-author Roberto Myers, associate professor of materials science and engineering at Ohio State. But his team didn’t set out to make a UV LED.
“As far as we know, nobody had ever driven electrons through gadolinium inside an LED before,” Myers said. “We just wanted to see what would happen.”
When doctoral students Thomas Kent and Santino Carnevale started creating gadolinium-containing LEDs in the lab, they utilized another patent-pending technology they had helped develop—one for creating nanowire LEDs. On a silicon wafer, they tailor the wires’ composition to tune the polarization of the wires and the wavelength, or color, of the light emitted by the LED.
Gadolinium was chosen not to make a good UV LED, but to carry out a simple experiment probing the basic properties of a new material they were studying, called gadolinium nitride. During the course of that original experiment, Kent noticed that sharp emission lines characteristic of the element gadolinium could be controlled with electric current.
Different elements fluoresce at different wavelengths when they are excited, and gadolinium fluoresces most strongly at a very precise wavelength in the UV, outside of the range of human vision. The engineers found that the gadolinium-doped wires glowed brightly at several specific UV frequencies.
Exciting different materials to generate light is nothing new, but materials that glow in UV are harder to excite. The only other reported device which can electrically control gadolinium light emission requires more than 250 volts to operate. The Ohio State team showed that in a nanowire LED structure, the same effect can occur, but at far lower operating voltages: around 10 volts. High voltage devices are difficult to miniaturize, making the nanowire LEDs attractive for portable applications.
“The other device needs high voltage because it pushes electrons through a vacuum and accelerates them, just like a cathode ray tube in an old-style TV. The high-energy electrons then slam into gadolinium atoms, which absorb the energy and re-emit it as light in the UV,” Myers explained.
“We believe our device works at significantly less voltage precisely because of the LED structure, where the gadolinium is placed in the center of the LED, exactly where electrons are losing their energy. The gadolinium atoms get excited and emit the same UV light, but the device only requires around 10 volts.”
Because the LED emits light at specific wavelengths, it could be useful for research spectroscopy applications that require a reference wavelength, and because it requires only 10 volts, it might be useful in portable devices.
The same technology could conceivably be used to make UV laser diodes. Currently high-powered gas lasers are used to produce a laser at UV wavelengths with applications from advanced electronics manufacturing to eye surgery. The so-called excimer lasers contain toxic gases and run on high voltages, so solid-state lasers are being explored as a lower power—and non-toxic—alternative.
As to cost, Kent pointed out that the team grows its LEDs on a standard silicon wafer, which is inexpensive and easily scaled up to use in industry.
“Using a cheap substrate is good; it balances the cost of manufacturing the nanowires,” he said.
The team is now working to maximize the efficiency of the UV LED, and the university's Technology Commercialization and Knowledge Transfer Office will license the design—as well as the method for making specially doped nanowires—to industry.
This research was sponsored by the National Science Foundation (NSF) and Ohio State’s Center for Emergent Materials, one of a network of Materials Research Science and Engineering Centers funded by NSF.
Contact: Roberto Myers, (614) 292-8439; Myers.email@example.com
Written by Pam Frost Gorder, (614) 292-9475; Gorder.firstname.lastname@example.org
Pam Frost Gorder | Source: Newswise
Further information: www.osu.edu
More articles from Power and Electrical Engineering:
Harvesting Electricity: Triboelectric Generators Capture Wasted Power
10.12.2013 | Georgia Institute of Technology
Scientists discover quick recipe for producing hydrogen
09.12.2013 | Deep Carbon Observatory
The molecular architecture of three key proteins and their complexes reveals how plants fine-tune their immune response to pathogens
Plants rarely get sick in their natural environment. When the threat of infection arises, a quick decision is made about the necessary countermeasures. The course is set by a protein which forms complexes with its partner proteins for this purpose.
Jane Parker from the Max Planck Institute for Plant Breeding ...
Researchers studying speciation of butterfly orchids on the Azores have been startled to discover that the answer to a long-debated question "Do the islands support one species or two species?" is actually "three species".
Hochstetter's Butterfly-orchid, newly recognized following application of a battery of scientific techniques and reveling in a complex taxonomic history worthy of Sherlock Holmes, is arguably Europe's rarest orchid species. Under threat in its mountain-top retreat, the orchid urgently requires conservation recognition.
A lavishly illustrated publication, titled "Systematic revision of Platanthera in ...
Researchers from Brown University and the University of Hawaii have found some mineralogical surprises in the Moon's largest impact crater.
Data from the Moon Mineralogy Mapper that flew aboard India's Chandrayaan-1 lunar orbiter shows a diverse mineralogy in the subsurface of the giant South Pole Aitken basin.
The differing mineral signatures could be reflective of the minerals dredged up at the time of the giant impact 4 billion years ago, ...
In power electronics systems bonded connections create the central electrical connections between adjoining surfaces.
The quality of these bonded connections is one of the main factors that determines the reliability and availability of drive systems in electric vehicles, and hence constitutes a major design challenge for German auto manufacturers aiming to electrify their vehicles.
Now the partners participating in the RoBE (Robust Bonds in ...
International team of scientists develops new feedback method for optimizing the laser pulse shapes used in the control of chemical reactions
In many ways, traditional chemical synthesis is similar to cooking. To alter the final product, you can change the ingredients or their ratio, change the method of mixing ingredients, or change the temperature or pressure of the environment of the ingredients.
Like an accomplished chef, chemists have become very skilled ...
11.12.2013 | Information Technology
11.12.2013 | Life Sciences
11.12.2013 | Agricultural and Forestry Science
11.12.2013 | Event News
10.12.2013 | Event News
05.12.2013 | Event News