Generating electricity from water is not a new thing. Hydro power stations have already sprung up across the world in China, United States and Canada. However, scientists will not stop exploring advanced technologies for further improvement to benefit people’s lives.
Recently, PolyU’s Department of Building Services Engineering and the Water Supplies Department (WSD) of the Hong Kong Special Administrative Region Government have been working together to turn water mains into an alternative source of power.
Hong Kong has a network of water mains travelling over 7,800 km, which is comprehensively monitored by WSD using monitoring devices to make sure our water supply remain clean and well-maintained. Water mains need power for those devices. Conventionally, they are putting small turbines into our pipes to produce electricity from drinking water.
Our water main pipes present a real challenge. They are just one metre across and hold far less water volume and potential energy compared to giant water dams, say for example. In pushing the boundaries, specialists in hydrodynamics, mechanical engineering and renewable energy have created a highly efficient device in harnessing the power of water. The resulting turbine is small enough to fit into a pipe, and uses just a fraction of hydro-energy to generate about 80 volts, enough to power four compact fluorescent light bulbs.
The novel device consists of an external hydroelectric generator and highly efficient spherical water turbine which dips into flowing water and reclaims residual pressure. When water passes through, the turbine drives a central rotating shaft and a micro generator to produce electricity.
The key lies in a number of intelligent designs to extract more energy from flowing water. The 8-blade turbine would only take away a fraction of kinetic energy because it strikes an accurate balance between water volume, water pressure and consumption of hydrokinetic energy, which boosts efficiency without reducing the momentum of running water to guarantee a reliable water supply. Turbine blades are carefully sized to intersect the largest possible area of water flow and minimise water bypassing.
To achieve maximum power output, a revolutionary design made the central rotating shaft hollow on the inside to minimise energy losses when driving the generator and utilize the harvested energy in full. The team also made the water more energetic and produced a strong current with a special metal block placed at the centre of the pipe to compress and accelerate the water flow. To further protect our drinking water, the turbine does not have moving parts and does not need any lubricant to eliminate the slightest change of contamination.
The mini-hydro power has been put to test in a number of locations including underground pits and outdoor environments. The principal investigator, Prof. Hong-xing Yang from Department of Building Services Engineering commented, “We have made the water pipes self-sufficient.” In full operation, an array of in-pipe turbines is expected to save 700kWh of electricity and reduce 560 kg of carbon dioxide emission per year.
It is not only a green innovation to further cut our reliance on coal-based power plants, but also an engineering triumph that gives WSD an easy access to electricity in areas without power grid, such as treacherous terrains and underground. “This technology also points to viable turbine solutions for waters that have little potential for energy generation,” added Prof. Yang.
The invention won a Silver Medal from the 40th International Exhibition of Inventions of Geneva in Switzerland in April this year, validating the growing excellence of PolyU in creating working solutions to curb energy consumption and carbon footprint. PolyU spares no effort in the research and development of groundbreaking technologies that help protect the environment, and our experts are gear up for that challenge.
Wilfred Lai | Source: Research asia research news
Further information: www.polyu.edu.hk
Further Reports about: Building Technologies > drinking water > electricity > Ferchau Engineering > flowing water > kinetic energy > power plant > water flow > Water Snake > water supply
More articles from Power and Electrical Engineering:
Stop hyperventilating, say energy efficiency researchers
18.06.2013 | DOE/Pacific Northwest National Laboratory
A robot that runs like a cat
17.06.2013 | Ecole Polytechnique Fédérale de Lausanne
... two engines aircraft project “Elektro E6”.
The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.
EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...
Siemens scientists have developed new kinds of ceramics in which they can embed transformers.
The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.
The new technology was developed in cooperation with industrial and research partners who ...
Cheaper clean-energy technologies could be made possible thanks to a new discovery.
Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...
The Fraunhofer Institute for Laser Technology ILT generated a lot of interest at the LASER World of Photonics 2013 trade fair with its numerous industrial laser technology innovations.
Its highlights included beam sources and manufacturing processes for ultrashort laser pulses as well as ways to systematically optimize machining processes using computer simulations. There was even a specialist booth at the fair dedicated to the revolutionary technological potential of digital photonic production.
Now in its fortieth year, LASER World ...
It's not reruns of "The Jetsons", but researchers working at the National Institute of Standards and Technology (NIST) have developed a new microscopy technique that uses a process similar to how an old tube television produces a picture—cathodoluminescence—to image nanoscale features.
Combining the best features of optical and scanning electron microscopy, the fast, versatile, and high-resolution technique allows scientists to view surface and subsurface features potentially as small as 10 nanometers in size.
The new microscopy technique, described in the journal AIP Advances,* uses a beam of electrons to excite a specially ...
18.06.2013 | Materials Sciences
Artificial Sweetener a Potential Treatment for Parkinson's Disease
18.06.2013 | Health and Medicine
New way to improve antibiotic production
18.06.2013 | Life Sciences
International Symposium on Morphogenesis
14.06.2013 | Event News
ESMT Annual Forum: CEOs discuss “The Future of Jobs” with international academics and policymakers
13.06.2013 | Event News
Invitation: Mathematics for Industry and Society in the French Embassy Berlin, 04. - 05.07.2013
10.06.2013 | Event News