Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

UF engineer develops tiny, easily mass-produced motion sensor

10.02.2006


A University of Florida engineer is the latest researcher to design a tiny, easy-to-manufacture motion sensor, a development that could help popularize the sensors as standard equipment in personal electronics, medical devices and other applications.



The sensor, which measures about 3 square millimeters or one-tenth of an inch, is not the smallest motion sensor ever invented. But it is extremely sensitive, draws only a tiny amount of electrical power and — most important – is one of a new generation of sensors that can be made using the computer chip manufacturing industry’s standard techniques and equipment.

That means that in the near future “the application range can be expanded a lot,” said Huikai Xie, a UF assistant professor of electrical and computer engineering.


Xie is one of five authors of a paper describing the sensor that appeared in the December issue of the journal Institute of Electrical and Electronics Engineers Transactions on Circuits and Systems.

Motion sensors are hardly new, but they were large, heavy and typically used in airplanes and ships for navigational purposes in recent decades. Miniaturization techniques developed as part of a relatively new field called Micro Electrical Mechanical Systems, or MEMS, have steadily reduced their size and cost.

The result is that the sensors are steadily becoming commonplace in commercial products. Today’s cars, for example, contain tiny accelerometers that deploy airbags after sensing the sudden stops or changes in motion that occur during collisions. A small number of cell phones, personal digital assistants and laptops also now carry motion sensors, said Dave Monk, the manager for sensor operations at Freescale Semiconductor, the nation’s third-largest chip manufacturer.

They have several functions, he said. In PDAs, they may allow users who are reading a book to “turn the page” by simply turning the PDA over in their palm and then turning it back again, he said. And in cell phones, the motion sensors may sense when the phone has been dropped and shelter the hard drive to prevent memory loss.

Xie believes these sorts of applications are only the beginning. Cheap, tiny, easily made and paired with wireless technology, motion sensors could be easily worn or even sewn into clothes, he said. That could help coaches zero in on the movements of athletes, or nurses working at a distance monitor elderly people in their homes.

“This can be used to monitor an athlete’s physical activities, determining maximum shock during a football game, with the sensor placed inside the pads or helmet,” Xie said.

It’s even possible that the sensors could be implanted in bones during surgeries, giving orthopedic surgeons a unique way to monitor the progress of repairs, he said.

These developments have been stalled by high costs because many of the tiniest sensors developed so far require new or nonstandard manufacturing technology. Xie and other UF team members, including doctoral students Hongwei Qu and Deyou Fang, sought to solve this problem in their new research.

In a three-year-old project originally funded with a $170,000 grant from NASA, they developed a single-chip sensor that can be manufactured using Complementary Metal Oxide Semiconductor technology, the industry standard for silicon chip manufacturing.

The chip uses about one-thousandth of a watt of power, meaning it has the potential to operate for as long as a year on a standard watch battery. It is also extremely sensitive, so much so that it can register sound as well as motion.

Monk, of Freescale Semiconductor, said Xie’s research is important because its applied nature makes it highly useful to industry. “I see these engineers going all the way to putting it into a package, showing why it could be manufactured, showing all the critical components – that’s a whole lot closer to where we would pick it up,” he said.

Although developing the first few sensors was expensive, Xie estimated it could cost $10 or less if mass produced. He and his graduate students have installed several sensors in a cigarette pack-sized board of electronics to test their capabilities. UF also is pursuing a patent on the sensor.

“Eventually, you can wear all kinds of sensors with you to monitor everything you want to know - your heartbeat, your blood pressure or even something like your glucose concentration,” Xie said. “I think this is a very interesting, exciting field that will eventually help people live much higher quality of life.”

Huikai Xie | EurekAlert!
Further information:
http://www.ufl.edu

More articles from Power and Electrical Engineering:

nachricht Multiregional brain on a chip
16.01.2017 | Harvard John A. Paulson School of Engineering and Applied Sciences

nachricht Researchers develop environmentally friendly soy air filter
16.01.2017 | Washington State University

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Designing Architecture with Solar Building Envelopes

Among the general public, solar thermal energy is currently associated with dark blue, rectangular collectors on building roofs. Technologies are needed for aesthetically high quality architecture which offer the architect more room for manoeuvre when it comes to low- and plus-energy buildings. With the “ArKol” project, researchers at Fraunhofer ISE together with partners are currently developing two façade collectors for solar thermal energy generation, which permit a high degree of design flexibility: a strip collector for opaque façade sections and a solar thermal blind for transparent sections. The current state of the two developments will be presented at the BAU 2017 trade fair.

As part of the “ArKol – development of architecturally highly integrated façade collectors with heat pipes” project, Fraunhofer ISE together with its partners...

Im Focus: How to inflate a hardened concrete shell with a weight of 80 t

At TU Wien, an alternative for resource intensive formwork for the construction of concrete domes was developed. It is now used in a test dome for the Austrian Federal Railways Infrastructure (ÖBB Infrastruktur).

Concrete shells are efficient structures, but not very resource efficient. The formwork for the construction of concrete domes alone requires a high amount of...

Im Focus: Bacterial Pac Man molecule snaps at sugar

Many pathogens use certain sugar compounds from their host to help conceal themselves against the immune system. Scientists at the University of Bonn have now, in cooperation with researchers at the University of York in the United Kingdom, analyzed the dynamics of a bacterial molecule that is involved in this process. They demonstrate that the protein grabs onto the sugar molecule with a Pac Man-like chewing motion and holds it until it can be used. Their results could help design therapeutics that could make the protein poorer at grabbing and holding and hence compromise the pathogen in the host. The study has now been published in “Biophysical Journal”.

The cells of the mouth, nose and intestinal mucosa produce large quantities of a chemical called sialic acid. Many bacteria possess a special transport system...

Im Focus: Newly proposed reference datasets improve weather satellite data quality

UMD, NOAA collaboration demonstrates suitability of in-orbit datasets for weather satellite calibration

"Traffic and weather, together on the hour!" blasts your local radio station, while your smartphone knows the weather halfway across the world. A network of...

Im Focus: Repairing defects in fiber-reinforced plastics more efficiently

Fiber-reinforced plastics (FRP) are frequently used in the aeronautic and automobile industry. However, the repair of workpieces made of these composite materials is often less profitable than exchanging the part. In order to increase the lifetime of FRP parts and to make them more eco-efficient, the Laser Zentrum Hannover e.V. (LZH) and the Apodius GmbH want to combine a new measuring device for fiber layer orientation with an innovative laser-based repair process.

Defects in FRP pieces may be production or operation-related. Whether or not repair is cost-effective depends on the geometry of the defective area, the tools...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

12V, 48V, high-voltage – trends in E/E automotive architecture

10.01.2017 | Event News

2nd Conference on Non-Textual Information on 10 and 11 May 2017 in Hannover

09.01.2017 | Event News

Nothing will happen without batteries making it happen!

05.01.2017 | Event News

 
Latest News

Multiregional brain on a chip

16.01.2017 | Power and Electrical Engineering

New technology enables 5-D imaging in live animals, humans

16.01.2017 | Information Technology

Researchers develop environmentally friendly soy air filter

16.01.2017 | Power and Electrical Engineering

VideoLinks
B2B-VideoLinks
More VideoLinks >>>