Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Refrigerated Trucks to Keep Their Cool Thanks to Fuel Cell Technology

27.08.2013
Refrigerated trucks equipped with hydrogen fuel cells to make deliveries in three markets

Grocery merchants in Texas, California and New York will soon have ice cream, frozen foods and fresh produce delivered by tractor trailers whose refrigeration units are powered by fuel cells, a clean technology that makes energy silently and with dramatically reduced emissions.

The fuel cells will do the work normally done by a small diesel engine, which keeps the cargo at the proper temperature while the trucks are making deliveries. Each of the four trucks will still be equipped with a main diesel engine that actually powers the truck.

Researchers at the U.S. Department of Energy’s Pacific Northwest National Laboratory, which is overseeing the project, believe this will be the first time that refrigerated trucks making deliveries have been equipped with a fuel cell – a device that creates electricity by driving chemical reactions using hydrogen and air. The only byproducts are heat and water.

“This is a great application for a fuel cell,” said Kriston Brooks, the PNNL researcher leading the project. “A trailer refrigeration unit traditionally is powered by a small diesel engine or electric motor that drives compressors to provide cooling to the cargo. A fuel cell can potentially provide a clean, quiet and efficient alternative by powering the electric motor.”

Two leading fuel cell manufacturers, Massachusetts-based Nuvera and Albany, N.Y.-based Plug Power Inc., will each receive $650,000 from DOE’s Office of Energy Efficiency and Renewable Energy. The companies will provide matching funds and labor of their own. A PNNL team led by Brooks will oversee and evaluate the two-year program.

Industry officials estimate that approximately 300,000 refrigerated trucks with auxiliary power units are on the road in the United States. By replacing the small diesel engines with the more efficient fuel cell, users will see fuel savings of approximately 10 gallons a day per unit, in addition to reduced emission of pollutants and significantly quieter operation.

“Accelerated fuel cell use in this application is also expected to create jobs in the energy sector, increase fuel cell manufacturing volume, decrease costs, and catalyze a stronger domestic supplier base,” said Jamie Holladay, PNNL’s sector manager for fuel cell technologies.

Fuel cells are becoming more common as energy sources in buildings and in vehicles such as buses. While the devices are generally more expensive than traditional forms of energy generation, many scientists and product developers expect that as they become more widely adopted and production levels increase, their cost will come down, similar to what has happened to products like cell phones.

“One of the goals is to accelerate fuel cell use in industry,” said Brooks. “In spite of their higher costs now, the higher efficiency and zero emissions from fuel cells are enough to convince many companies not to wait to implement this technology. Fuel cell products are already used widely in warehouses, and this project broadens their reach.”

In one project, Nuvera will work with Thermo King to develop the refrigeration unit to keep the truck cool using Nuvera’s Orion™ fuel cell stack. That truck will make deliveries for a Sysco Corp. food distribution facility in Riverside, Calif., and for a San Antonio, Texas, food distribution center for the H-E-B grocery store chain.

In the other project, Plug Power will work with Carrier Transicold and Air Products to equip trucks making deliveries for a Sysco Corp. food distribution facility on Long Island. The trucks will be equipped with Plug Power’s GenDrive fuel cell product.

Both the Sysco and the H-E-B facilities already use forklifts powered by hydrogen fuel cells, part of a trend fostered by DOE to increase the use of the technology in industry. At both companies, the infrastructure to provide hydrogen for the fuel cells is already in place; the hydrogen is generated on site from natural gas and water using Nuvera’s PowerTap™ hydrogen generator and refueling system. For the site using the Plug Power technology, the hydrogen will be supplied by Air Products using an outdoor hydrogen dispenser.

Each fuel-cell powered refrigerated trailer will run for at least 400 hours at each demonstration site, delivering goods from the distribution centers to stores or other outlets.

About PNNL
Interdisciplinary teams at Pacific Northwest National Laboratory address many of America's most pressing issues in energy, the environment and national security through advances in basic and applied science. PNNL employs 4,500 staff, has an annual budget of nearly $1 billion, and has been managed for the U.S. Department of Energy by Ohio-based Battelle since the laboratory's inception in 1965. For more information, visit the PNNL News Center, or follow PNNL on Facebook, LinkedIn and Twitter.
About Nuvera
Nuvera Fuel Cells is a global leader in the development of fuel cell systems and hydrogen generation and dispensing products for both end users and OEMs (original equipment manufacturers). With offices located in the U.S. and Europe, Nuvera provides clean, safe, and efficient products for industrial vehicles and equipment in addition to furthering the development of power systems for automotive and transportation applications. Visit www.nuvera.com for more information.
About Plug Power Inc.
The architects of modern fuel cell technology, Plug Power revolutionized the industry with cost-effective power solutions that increase productivity, lower operating costs and reduce carbon footprints. Long-standing relationships with industry leaders forged the path for Plug Power's key accounts, including Walmart, Sysco, P&G and Mercedes. With more than 4,000 GenDrive units shipped to material handling customers, accumulating over 12 million hours of runtime, Plug Power manufactures tomorrow's incumbent power solutions today. Additional information about Plug Power is available at www.plugpower.com.

Tom Rickey | EurekAlert!
Further information:
http://www.pnnl.gov

More articles from Power and Electrical Engineering:

nachricht Silicon solar cell of ISFH yields 25% efficiency with passivating POLO contacts
08.12.2016 | Institut für Solarenergieforschung GmbH

nachricht Robot on demand: Mobile machining of aircraft components with high precision
06.12.2016 | Fraunhofer IFAM

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Electron highway inside crystal

Physicists of the University of Würzburg have made an astonishing discovery in a specific type of topological insulators. The effect is due to the structure of the materials used. The researchers have now published their work in the journal Science.

Topological insulators are currently the hot topic in physics according to the newspaper Neue Zürcher Zeitung. Only a few weeks ago, their importance was...

Im Focus: Significantly more productivity in USP lasers

In recent years, lasers with ultrashort pulses (USP) down to the femtosecond range have become established on an industrial scale. They could advance some applications with the much-lauded “cold ablation” – if that meant they would then achieve more throughput. A new generation of process engineering that will address this issue in particular will be discussed at the “4th UKP Workshop – Ultrafast Laser Technology” in April 2017.

Even back in the 1990s, scientists were comparing materials processing with nanosecond, picosecond and femtosesecond pulses. The result was surprising:...

Im Focus: Shape matters when light meets atom

Mapping the interaction of a single atom with a single photon may inform design of quantum devices

Have you ever wondered how you see the world? Vision is about photons of light, which are packets of energy, interacting with the atoms or molecules in what...

Im Focus: Novel silicon etching technique crafts 3-D gradient refractive index micro-optics

A multi-institutional research collaboration has created a novel approach for fabricating three-dimensional micro-optics through the shape-defined formation of porous silicon (PSi), with broad impacts in integrated optoelectronics, imaging, and photovoltaics.

Working with colleagues at Stanford and The Dow Chemical Company, researchers at the University of Illinois at Urbana-Champaign fabricated 3-D birefringent...

Im Focus: Quantum Particles Form Droplets

In experiments with magnetic atoms conducted at extremely low temperatures, scientists have demonstrated a unique phase of matter: The atoms form a new type of quantum liquid or quantum droplet state. These so called quantum droplets may preserve their form in absence of external confinement because of quantum effects. The joint team of experimental physicists from Innsbruck and theoretical physicists from Hannover report on their findings in the journal Physical Review X.

“Our Quantum droplets are in the gas phase but they still drop like a rock,” explains experimental physicist Francesca Ferlaino when talking about the...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ICTM Conference 2017: Production technology for turbomachine manufacturing of the future

16.11.2016 | Event News

Innovation Day Laser Technology – Laser Additive Manufacturing

01.11.2016 | Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

 
Latest News

Researchers identify potentially druggable mutant p53 proteins that promote cancer growth

09.12.2016 | Life Sciences

Scientists produce a new roadmap for guiding development & conservation in the Amazon

09.12.2016 | Ecology, The Environment and Conservation

Satellites, airport visibility readings shed light on troops' exposure to air pollution

09.12.2016 | Health and Medicine

VideoLinks
B2B-VideoLinks
More VideoLinks >>>