Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

NREL Survey Shows Dramatic Improvement in B100 Biodiesel Quality

17.04.2013
The latest national survey of 100% biodiesel (B100) "blend stock" samples by the U.S. Department of Energy’s National Renewable Energy Laboratory (NREL) found that 95% of the samples from 2011-12 met ASTM International fuel quality specifications.
The ASTM standards serve as guidelines for industry and are designed to ensure quality at the pump for consumers – along with reliable operation of the nation’s vehicles powered by biodiesel blends.

“The survey showed a major improvement over results from previous years,” NREL Senior Chemist Teresa Alleman said. “In our 2007 survey of B100 biodiesel, less than half of the samples met quality specifications. More stringent quality requirements, along with the voluntary BQ-9000 quality management program, are among the reasons for this marked improvement.”

B100 is not commonly used as a fuel, but is blended with petroleum diesel, typically in blends up to 20%, and has been part of the industry's steady growth in the past decade. B100 production increased from 27.9 million gallons in 2004 to more than 1 billion gallons in 2012.

For the most recent survey conducted from August 2011 to February 2012, NREL researchers collected fuel samples from 53 producers and 14 terminals from across the United States. Terminals from the East and West Coasts, the Rocky Mountain region, and the Midwest were tested for a range of critical properties, such as free and total glycerin content, metals content, and cloud point that could have an immediate impact on operability.

To ensure product quality, ASTM published the first B100 quality standards in 2002. ASTM International does not enforce fuel quality, but it is a leader in the development and delivery of international voluntary consensus standards. Its specifications are frequently adopted by state and local governments to ensure fuel quality and are monitored by industry members. NREL is among the organizations participating in the development of standards.

The anonymous data from the NREL study "Quality Parameters and Chemical Analysis for Biodiesel Produced in the United States in 2011" are in publication and available on NREL’s website for use by interested parties.

NREL is the U.S. Department of Energy's primary national laboratory for renewable energy and energy efficiency research and development. NREL is operated for DOE by the Alliance for Sustainable Energy, LLC.

David Glickson | EurekAlert!
Further information:
http://www.nrel.gov

More articles from Power and Electrical Engineering:

nachricht Energy hybrid: Battery meets super capacitor
01.12.2016 | Technische Universität Graz

nachricht Tailor-Made Membranes for the Environment
30.11.2016 | Forschungszentrum Jülich

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Novel silicon etching technique crafts 3-D gradient refractive index micro-optics

A multi-institutional research collaboration has created a novel approach for fabricating three-dimensional micro-optics through the shape-defined formation of porous silicon (PSi), with broad impacts in integrated optoelectronics, imaging, and photovoltaics.

Working with colleagues at Stanford and The Dow Chemical Company, researchers at the University of Illinois at Urbana-Champaign fabricated 3-D birefringent...

Im Focus: Quantum Particles Form Droplets

In experiments with magnetic atoms conducted at extremely low temperatures, scientists have demonstrated a unique phase of matter: The atoms form a new type of quantum liquid or quantum droplet state. These so called quantum droplets may preserve their form in absence of external confinement because of quantum effects. The joint team of experimental physicists from Innsbruck and theoretical physicists from Hannover report on their findings in the journal Physical Review X.

“Our Quantum droplets are in the gas phase but they still drop like a rock,” explains experimental physicist Francesca Ferlaino when talking about the...

Im Focus: MADMAX: Max Planck Institute for Physics takes up axion research

The Max Planck Institute for Physics (MPP) is opening up a new research field. A workshop from November 21 - 22, 2016 will mark the start of activities for an innovative axion experiment. Axions are still only purely hypothetical particles. Their detection could solve two fundamental problems in particle physics: What dark matter consists of and why it has not yet been possible to directly observe a CP violation for the strong interaction.

The “MADMAX” project is the MPP’s commitment to axion research. Axions are so far only a theoretical prediction and are difficult to detect: on the one hand,...

Im Focus: Molecules change shape when wet

Broadband rotational spectroscopy unravels structural reshaping of isolated molecules in the gas phase to accommodate water

In two recent publications in the Journal of Chemical Physics and in the Journal of Physical Chemistry Letters, researchers around Melanie Schnell from the Max...

Im Focus: Fraunhofer ISE Develops Highly Compact, High Frequency DC/DC Converter for Aviation

The efficiency of power electronic systems is not solely dependent on electrical efficiency but also on weight, for example, in mobile systems. When the weight of relevant components and devices in airplanes, for instance, is reduced, fuel savings can be achieved and correspondingly greenhouse gas emissions decreased. New materials and components based on gallium nitride (GaN) can help to reduce weight and increase the efficiency. With these new materials, power electronic switches can be operated at higher switching frequency, resulting in higher power density and lower material costs.

Researchers at the Fraunhofer Institute for Solar Energy Systems ISE together with partners have investigated how these materials can be used to make power...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ICTM Conference 2017: Production technology for turbomachine manufacturing of the future

16.11.2016 | Event News

Innovation Day Laser Technology – Laser Additive Manufacturing

01.11.2016 | Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

 
Latest News

UTSA study describes new minimally invasive device to treat cancer and other illnesses

02.12.2016 | Medical Engineering

Plasma-zapping process could yield trans fat-free soybean oil product

02.12.2016 | Agricultural and Forestry Science

What do Netflix, Google and planetary systems have in common?

02.12.2016 | Physics and Astronomy

VideoLinks
B2B-VideoLinks
More VideoLinks >>>