Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

No more Leakage of Explosive Electrolytes in Batteries

28.06.2013
*Konnyaku-like Electrolytes with High Ionic Conductivity & Cationic Transference Number

*Konnnyaku: a thermo-irreversible gelatin which is used in Japanese food, maintains its gelatin physical statue at high temperatures.


Elastic behaviour of a cylindrical monolith of the gel electrolyte based on 2 wt. % PVA-CN in 1 M LiPF6 in 1:2 (vol.) EC:EMC as the base liquid electrolyte



Copyright : UNIST

A research team at Ulsan National Institute of Science and Technology (UNIST), S. Korea, found a new physical organogel electrolyte with two unique characteristics: an irreversible thermal gelation and a high value of the Li+ transference number.

A recent fire on a Boeing 787 on the ground in Boston, US, was caused by a battery failure, it resulted in the release of flammable electrolytes, heat damage and smoke. If they had used a safer electrolyte, the risk would have been reduced.

Electrolytes are essential components of supercapacitors, batteries and fuel cells. The Most widely used electrolyte is a liquid type since its overall ionic conductivity and value of transference numbers are better than solid-type electrolytes. However, safety concerns caused by its leakage and explosive nature, caused an extensive call for the research on the development of solid-type electrolyte.

The development of solid-type electrolytes, safe from explosion caused by high temperature and overcharge, is urgently needed to replace the liquid electrolytes. The solid electrolyte enables batteries to be safer as well as the use of higher energy electrode materials.

The most important parameter of electrolytes used in electrochemical cells is ionic conductivity. The use of solid-state electrolytes has been limited due to low ionic conductivity caused by their immobile matrix regardless of their own merits such as no leak, non-volatility, mechanical strength and processing flexibility.

Another parameter we should consider is transference of the number of ions. Electrolytes are characterized by their ionic conductivity, It is desirable that overall ionic results from the dominant contribution of the ions of interest. However high values of the cationic transference number achieved by solid or gel electrolytes have resulted in low ionic conductivity leading to inferior cell performances.

The research team of Profs. Hyun-Kon Song and Noejung Park of UNIST, presented an organogel polymer electrolyte characterized by a high liquid-electrolyte-level ionic conductivity with high a cationic transference number for Lithium ion batteries (LIB).

The research team acquired the two required properties simultaneously in polymer gel electrolytes: a liquid-electrolyte-level conductivity with a high transference number. Cyanoethly polyvinyle alchohol (PVA-CN) played a key role in the highly conductive gel electrolyte while another cyano resin, Cyanoethlyle pullulan (Pullulan-CN), was used as a control representing a liquid electrolyte containing cyano chains. The PVA-CN-containing liquid electrolyte was thermally gelated even without any chemical crosslinkers or polymerizations initiators.

Hyun-Kon Song and Noejung Park, both, professors of the Interdisciplinary School of Green Energy, UNIST, South Korea, led the effort. Fellow authors include: Young-Soo Kim, Yoon-Gyo Cho, and Dori Odkhuu from UNIST.

“We believe that this new type of electrolyte gel provides us with design flexibility in devices as well as enhanced safety and stability to electro-chemical devices,” said Prof. Song.

This research was funded by the World Class University (WCU) programs through the National Research Foundation of Korea (NRF) and published on May 29, 2013 in the (Nature Publishing Group) Scientific Reports. (Title: A Physical organogel electrolyte: characterized by in situ thermo-irreversible gelation and single-ion-predominent conduction, DOI: 10.1038/srep01917)

Journal information
Scientific Reports
Funding information
The World Class University (WCU) programs through the National Research Foundation of Korea (NRF)

Eunhee Song | Research asia research news
Further information:
http://www.unist.ac.kr/board/view.sko?boardId=Notice&boardSid=5037&menuCd=AB07002001000&contentsSid=8297&orderBy=register_dt&startPage=
http://www.researchsea.com

More articles from Power and Electrical Engineering:

nachricht Researchers pave the way for ionotronic nanodevices
23.02.2017 | Aalto University

nachricht Microhotplates for a smart gas sensor
22.02.2017 | Toyohashi University of Technology

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Stingless bees have their nests protected by soldiers

24.02.2017 | Life Sciences

New risk factors for anxiety disorders

24.02.2017 | Life Sciences

MWC 2017: 5G Capital Berlin

24.02.2017 | Trade Fair News

VideoLinks
B2B-VideoLinks
More VideoLinks >>>