Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Caltech researchers find schooling fish offer new ideas for wind farming

18.05.2010
The quest to derive energy from wind may soon be getting some help from California Institute of Technology (Caltech) fluid-dynamics expert John Dabiri—and a school of fish.

As head of Caltech's Biological Propulsion Laboratory, Dabiri studies water- and wind-energy concepts that share the theme of bioinspiration: that is, identifying energy-related processes in biological systems that may provide insight into new approaches to—in this case—wind energy.

"I became inspired by observations of schooling fish, and the suggestion that there is constructive hydrodynamic interference between the wakes of neighboring fish," says Dabiri, associate professor of aeronautics and bioengineering at Caltech. "It turns out that many of the same physical principles can be applied to the interaction of vertical-axis wind turbines."

The biggest challenge with current wind farms is lack of space. The horizontal-axis wind turbines most commonly seen—those with large propellers—require a substantial amount of land to perform properly. "Propeller-style wind turbines suffer in performance as they come in proximity to one another," says Dabiri.

In the Los Angeles basin, the challenge of finding suitable space for such large wind farms has prevented further progress in the use of wind energy. But with help from the principles supplied by schooling fish, and the use of vertical-axis turbines, that may change.

Vertical turbines—which are relatively new additions to the wind-energy landscape—have no propellers; instead, they use a vertical rotor. Because of this, the devices can be placed on smaller plots of land in a denser pattern. Caltech graduate students Robert Whittlesey and Sebastian Liska researched the use of vertical-axis turbines on small plots during a class research project supervised by Dabiri. Their results suggest that there may be substantial benefits to placing vertical-axis turbines in a strategic array, and that some configurations may allow the turbines to work more efficiently as a result of their relationship to others around them—a concept first triggered by examining schools of fish.

In current wind farms, all of the turbines rotate in the same direction. But while studying the vortices left behind by fish swimming in a school, Dabiri noticed that some vortices rotated clockwise, while others rotated counter-clockwise. Dabiri therefore wants to examine whether alternating the rotation of vertical-axis turbines in close proximity will help improve efficiency. The second observation he made studying fish—and seen in Whittlesey and Liska's simulation—was that the vortices formed a "staircase" pattern, which contrasts with current wind farms that place turbines neatly in rows.

Whittlesey and Liska's computer models predicted that the wind energy extracted from a parcel of land using this staggered placement approach would be several times that of conventional wind farms using horizontal-axis turbines. Once they've identified the optimal placement, Dabiri believes it may be possible to produce more than 10 times the amount of energy currently provided by a farm of horizontal turbines. The results are sufficiently compelling that the Caltech group is pursuing a field demonstration of the idea.

Dabiri has purchased two acres of land north of Los Angeles, where he is establishing the Caltech Field Laboratory for Optimized Wind Energy (FLOWE). The pilot program at the site will feature six vertical turbines on mobile platforms.

Dabiri and his team will systematically move the turbines around, testing various configurations to find the most efficient patterns.

"Our goal is to demonstrate a new technology that enables us to extract significantly more wind energy from a given parcel of land than is currently possible using existing methods," says Dabiri. "We want to take advantage of constructive aerodynamic interference between closely spaced vertical-axis wind turbines. Our results can potentially make better use of existing wind farms, allow for wind farms to be located closer to urban centers—reducing power transmission costs—and reduce the size of offshore installations."

Three of Dabiri's turbines are being provided in partnership with Windspire Energy. In exchange for the use of the turbines, Dabiri will share his research results with the company. Each Windspire turbine stands approximately 30 feet tall and 4 feet wide, and can generate up to 1.2 kW of power.

"This leading-edge project is a great example of how thinking differently can drive meaningful innovation," says Windspire Energy President and CEO Walt Borland. "We are very excited to be able to work with Dr. Dabiri and Caltech to better leverage the unique attributes of vertical-axis technology in harvesting wind energy."

Three turbines from another manufacturer have been purchased; the six turbines give the pilot facility a total power capacity of 15 kW, enough to power several homes.

"This project is unique in that we are conducting these experiments in real-world conditions, as opposed to on the computer or in a laboratory wind tunnel," says Dabiri. "We have intentionally focused on a field demonstration because this can more easily facilitate a future expansion of the project from basic science research into a power-generating facility. Our ability to make that transition will depend on the results of the pilot program."

The initial phase of the study will attempt to demonstrate which configuration of units will improve power output and performance relative to a horizontal-axis wind turbine farm with a similar sized plot of land.

"In the future, we hope to transition to power-generation experiments in which the generated power can be put to use either locally or via a grid connection," Dabiri says.

The American Recovery and Reinvestment Act provided partial funding for this project.

For more information on FLOWE, visit:
http://dabiri.caltech.edu/research/wind-energy.html

Jon Weiner | EurekAlert!
Further information:
http://www.caltech.edu
http://dabiri.caltech.edu/research/wind-energy.html

More articles from Power and Electrical Engineering:

nachricht Researchers pave the way for ionotronic nanodevices
23.02.2017 | Aalto University

nachricht Microhotplates for a smart gas sensor
22.02.2017 | Toyohashi University of Technology

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Stingless bees have their nests protected by soldiers

24.02.2017 | Life Sciences

New risk factors for anxiety disorders

24.02.2017 | Life Sciences

MWC 2017: 5G Capital Berlin

24.02.2017 | Trade Fair News

VideoLinks
B2B-VideoLinks
More VideoLinks >>>