Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Hourly workforce carries burden during recession

01.09.2010
Workers' challenges likely to remain after recovery

The United States workforce, battered by an economic slowdown, now includes a record number of workers who are involuntarily working part-time due to reduced hours or the inability to find a full-time job.

Hourly workers — the majority of the wage and salary workforce — are especially susceptible to reduced, irregular and fluctuating hours, and the myriad of challenges associated with them, according to researchers at the School of Social Service Administration at the University of Chicago.

Although much has been made of the hardships facing the nearly 10 percent of Americans out of work in the current recession, many workers approach this Labor Day having held onto their jobs while being disadvantaged. So claim Susan Lambert and Julia Henly, associate professors at SSA who are experts on the hourly workforce and workplace flexibility for low-level workers.

Hourly and especially part-time workers receive limited formal employee benefits from their employers, and in many cases, are not eligible for public benefits such as unemployment insurance, cash assistance, or family and medical leave. In addition, their work schedules are typically set with limited advance notice and subject to last-minute changes, resulting in unpredictable schedules.

Changes in public policy as well as company practices could help these workers, the researchers contend.

"Certainly the current recession is contributing to underemployment, as evidenced by the proportion of American workers classified as 'involuntary part-time,'" said Lambert.

The Census Bureau uses the term for those who work less than 35 hours a week because they could not find a full-time job or those who work reduced hours due to "slack demand." In November 2009, 9.2 million workers fell in this category, the highest level in recorded history.

Other recessions also have seen an increase in involuntary part-time workers, she said. For example, the labor market added 1.5 million involuntary part-time workers between 1981 and 1982 for a total of 6.8 million workers, surging up again to add 2.3 million between 1992 and 1993 for a total of 6.7 million workers.

"I think it is important to underscore that employment has become increasingly precarious over the past 30 years, not just during recessionary periods, due to structural changes in the economy, reductions in labor protections and evolving employer practices that pass risk from the market onto workers," Lambert said. "The current recession highlights these insecurities, bringing much-needed attention to the plight of disadvantaged workers who are struggling to keep their jobs as well as maintain sufficient hours to make ends meet.

The problems faced by hourly, low-level workers are unlikely to go away when the economy fully recovers."

In good times and bad, employers frequently use "just-in-time" scheduling practices — setting hourly workers' schedules with limited advance notice to accommodate fluctuating demand — as a means of maintaining a tight link between labor costs and demand.

Unpredictable schedules not only make it harder for workers to determine their incomes, they also make it hard to plan for childcare and family life, Henly said.

"Unpredictable work schedules can translate into instability in family routines and practices, placing additional burdens on already strapped and busy families, their caregivers and extended family members," she said.

"We find that hourly retail employees with more predictable work schedules report lower levels of stress, less work-to-family conflict and fewer work interferences with non-work activities such as scheduling doctor's appointments, socializing with friends and eating meals together as a family."

Lambert and Henly are investigating the management and employee sides of scheduling practices in their "Work Scheduling Study," which tracked a national retail apparel firm. Several key findings are detailed in their recent report, "Managers' Strategies for Balancing Business Requirements with Employees' Needs."

Among the study's findings:

Hours vary substantially for both part-time and full-time hourly workers in this firm, with full-time employees working more hours but also experiencing the greatest fluctuations in hours from week to week.

The more hours employees work and the less their hours fluctuate, the longer they remain employed at the firm, even after taking into account factors such as age, race and job status.

Job turnover is high, particularly for part-time sales associates, younger workers, African Americans and recently hired workers.

Management practices contribute to job turnover above and beyond individual worker characteristics. Stores in which managers pursue a strategy of keeping their staff size small with the goal of providing each sales associate with sufficient hours have lower turnover and higher retention rates than stores in which managers keep their staff size large.

Workplace flexibility has become an important topic in public policy debates as more parents seek ways to reconcile demands of their jobs with family life. Flexibility options that are frequently touted include allowing workers to work reduced hours, work at home, or vary the start and end times of the workday.

According to Lambert and Henly, options that reduce job rigidity make sense for managerial and professional jobs characterized by long and rigid hours. But they caution that conventional flexibility options do not map well onto the jobs of many low-level hourly workers, who face fluctuating hours, too few rather than too many hours and place-bound job duties that preclude bringing their work home.

"Fortunately, policymakers, advocacy groups and researchers are becoming increasingly interested in developing and promoting flexibility options for U.S. workers in hourly jobs. As these initiatives proceed, it will be important that they reflect the range of work conditions found in hourly jobs, including low-wage jobs in service industries," Lambert and Henly write in their forthcoming paper, "Work Schedule Flexibility in Hourly Jobs: Unanticipated Consequences and Promising Directions. "

Joining Lambert and Henly on this paper is Anna Haley-Lock, a 2003 Ph.D. graduate of SSA and now an assistant professor of social work at the University of Wisconsin, Madison.

Creating flexibility options for low-level hourly workers will be one topic addressed in a series of four regional conferences organized by the White House in the coming year. The first of the forums will be held Oct. 7 in Dallas on the issue of flexibility in small businesses. Forums in both Los Angeles and Chicago are tentatively scheduled for early 2011 and will focus on flexibility in low-wage jobs and in the manufacturing sector, respectively.

Henly and Lambert expect that the need of low-level hourly workers for stable and adequate hours and for benefits defined in both public and employer policy will be discussed.

The Work Scheduling Study has received support from the Ford Foundation, the Russell Sage Foundation and the Annie E. Casey Foundation.

William Harms | EurekAlert!
Further information:
http://www.uchicago.edu

More articles from Business and Finance:

nachricht Frugal Innovations: when less is more
19.04.2017 | Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO

nachricht Europe's microtechnology industry is attuned to growth
10.03.2017 | IVAM Fachverband für Mikrotechnik

All articles from Business and Finance >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Making lightweight construction suitable for series production

More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.

Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...

Im Focus: Wonder material? Novel nanotube structure strengthens thin films for flexible electronics

Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.

"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...

Im Focus: Deep inside Galaxy M87

The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.

Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...

Im Focus: A Quantum Low Pass for Photons

Physicists in Garching observe novel quantum effect that limits the number of emitted photons.

The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...

Im Focus: Microprocessors based on a layer of just three atoms

Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.

Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Expert meeting “Health Business Connect” will connect international medical technology companies

20.04.2017 | Event News

Wenn der Computer das Gehirn austrickst

18.04.2017 | Event News

7th International Conference on Crystalline Silicon Photovoltaics in Freiburg on April 3-5, 2017

03.04.2017 | Event News

 
Latest News

NASA's Fermi catches gamma-ray flashes from tropical storms

25.04.2017 | Physics and Astronomy

Researchers invent process to make sustainable rubber, plastics

25.04.2017 | Materials Sciences

Transfecting cells gently – the LZH presents a GNOME prototype at the Labvolution 2017

25.04.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>