Cyclone Rusty is nearing a landfall in northwestern West Australia, while Tropical Storm 18S is headed in a similar direction.
Tropical Storm 18S (TS18S) was born on Feb. 24 and achieved tropical storm strengthe with maximum sustained winds near 35 knots (40 mph). It formed about 45 nautical miles southeast of the Cocos Islands, Australia near 12.7 south latitude and 97.3 east longitude.
Wind shear on Feb. 24 was affecting the storm, and pushing the strongest thunderstorms west of the center. NASA's TRMM satellite captured data on rainfall and noted the strongest rainfall was occurring west of the center at a rate of more than 1.4 inches per hour.
On Feb. 24 at 0729 UTC (2:29 a.m. EST), the Atmospheric Infrared Sounder (AIRS) instrument aboard NASA's Aqua satellite captured infrared data on TS18S. The data was created into a false-colored image at NASA's Jet Propulsion Laboratory in Pasadena, Calif. False coloration enables meteorologists to see distinction in temperatures, and the coldest temperatures and highest cloud tops (and strongest thunderstorms) appeared in a large area around TD18S's center. Cloud top temperatures around the center exceeded the -63 Fahrenheit (-52 Celsius) threshold, indicating that those areas were likely dropping heavy rainfall.
Satellite data has shown that wind shear is still affecting the tropical storm, and pushing the main convection to the west. That wind shear is expected to persist over the next couple of days before easing up.
On Feb. 25 at 1500 UTC (10 a.m. EST) Tropical Storm 18S was located about 980 nautical miles (1,128 miles/1,815 km) west-northwest of Learmonth, Australia, near 14.7 south and 99.0 east. TS18S had maximum sustained winds near 35 knots (40.2 mph/64.8 kph) and was moving to the southeast near 6 knots (6.9 mph/11.1 kph).
Forecasters at the Joint Typhoon Warning Center expect TS18S to take an easterly track, toward Port Hedland and Learmonth, Western Australia after the second of March. If that occurs, the residents of northwestern Australia will be recovering from Cyclone Rusty when Tropical Storm 18S approaches.
Text Credit: Rob Gutro
NASA's Goddard Space Flight Center, Greenbelt, Md.
Rob Gutro | Source: EurekAlert!
Further information: www.nasa.gov
Further Reports about: 18S > Aqua satellite > Cyclone > Goddard Space Flight Center > NASA > nautical miles > strongest thunderstorms > TRMM satellite > tropical diseases > tropical storm > TS18S > UTC > wind shear
More articles from Earth Sciences:
NASA satellite sees developing tropical depression near Philippines
18.06.2013 | NASA/Goddard Space Flight Center
Second Atlantic season tropical depression forms
18.06.2013 | NASA/Goddard Space Flight Center
... two engines aircraft project “Elektro E6”.
The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.
EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...
Siemens scientists have developed new kinds of ceramics in which they can embed transformers.
The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.
The new technology was developed in cooperation with industrial and research partners who ...
Cheaper clean-energy technologies could be made possible thanks to a new discovery.
Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...
The Fraunhofer Institute for Laser Technology ILT generated a lot of interest at the LASER World of Photonics 2013 trade fair with its numerous industrial laser technology innovations.
Its highlights included beam sources and manufacturing processes for ultrashort laser pulses as well as ways to systematically optimize machining processes using computer simulations. There was even a specialist booth at the fair dedicated to the revolutionary technological potential of digital photonic production.
Now in its fortieth year, LASER World ...
It's not reruns of "The Jetsons", but researchers working at the National Institute of Standards and Technology (NIST) have developed a new microscopy technique that uses a process similar to how an old tube television produces a picture—cathodoluminescence—to image nanoscale features.
Combining the best features of optical and scanning electron microscopy, the fast, versatile, and high-resolution technique allows scientists to view surface and subsurface features potentially as small as 10 nanometers in size.
The new microscopy technique, described in the journal AIP Advances,* uses a beam of electrons to excite a specially ...
18.06.2013 | Materials Sciences
18.06.2013 | Health and Medicine
18.06.2013 | Life Sciences
14.06.2013 | Event News
13.06.2013 | Event News
10.06.2013 | Event News