The Australian Bureau of Meteorology (ABOM) has posted cyclone warnings and a yellow and blue alert for Western Australia as Rusty approaches for a landfall. A Cyclone Warning is in effect from Broome to Mardie, and adjacent inland areas of the Pilbara, including Marble Bar, Nullagine and Millstream. A Cyclone Watch is in effect for adjacent inland areas of the Pilbara including Tom Price, Newman and Telfer.
A Yellow Alert is in effect for communities between Wallal and Whim Creek, including Pardoo, De Grey and Port Hedland. ABOM has also issued a Blue Alert for communities between Broome and Wallal including Broome and Bidyadanga, between Whim Creek and Mardie, including Karratha and extending to adjacent inland areas including Marble Bar, Nullagine and Millstream.
On Sunday, Feb. 24, soon after Rusty formed warnings were already being posted. At 1200 UTC (7 a.m. EST) on Feb. 24, Rusty's maximum sustained winds had quickly climbed to near 60 knots (69 mph/111 kph). Rusty's center was located near 17.7 south and 118.3 east, about 160 nautical miles from Port Hedland, Australia and was slowly moving to the south-southwest
Microwave satellite data on Feb. 24 showed that Rusty was consolidating rapidly and had already developed a 20-nautical mile wide eye despite being a tropical storm.
On Feb. 25 at 0215 UTC (9:15 p.m. EST, Feb. 24) the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument aboard NASA's Terra satellite captured a visible image of Cyclone Rusty closing in on the northwestern coast of Western Australia. Rusty's outer band of thunderstorms stretched from Broome to Port Hedland. Satellite data showed that the bands of thunderstorms have intensified and are wrapping more tightly into the low level circulation canter than they did 24 hours prior.
On Feb. 25 at 0900 UTC (4 a.m. EST/ 5 p.m. local time WST), Cyclone Rusty's maximum sustained winds were near 65 knots (74.8 mph/120.4 kph). Rusty was located near 18.4 south latitude and 119.0 east longitude and moving to the southeast at 5 knots (5.7 mph/9.2 kph). At 1500 UTC (10 a.m. EST/11:00 p.m. WST local time) Tropical Cyclone Rusty was estimated to be 210 kilometers north northeast of Port Hedland, according to the Australian Bureau of Meteorology. Forecasters at the Joint Typhoon Warning Center caution that Rusty is expected to intensify quickly over the next day because of warm waters and low wind shear.
Rusty is a large tropical cyclone and its slow movement is likely to result in higher than usual rainfall in the Pilbara and western Kimberley coasts. Because of the storm's slow track, heavy rainfall and flooding are likely over the next couple of days. Very rough surf, high waves and coastal erosion are also likely as Rusty slowly heads for landfall. For updated warnings, watches and alerts from the ABOM, visit: http://www.bom.gov.au/australia/warnings/index.shtml.
The Joint Typhoon Warning Center now projects that landfall will occur sometime near 1800 UTC (1 p.m. EST/U.S.) on Feb. 26 or 2 a.m. WST local time on Feb. 27, just east of Port Hedland.
Text Credit: Rob Gutro
NASA's Goddard Space Flight Center, Greenbelt, Md.
Rob Gutro | Source: EurekAlert!
Further information: www.nasa.gov
Further Reports about: Australian workers > coastal erosion > Cyclone > Cyclone Rusty > cyclone warnings > Goddard Space Flight Center > Joint Typhoon Warning Center > Marble Bar > Meteorology > Millstream > NASA > NASA's Terra satellite > satellite data > tropical cyclone > tropical diseases > Typhoon > Typhoon Warning > Typhoon Warning Center > UTC
More articles from Earth Sciences:
Noble gases hitch a ride on hydrous minerals
17.06.2013 | Brown University
Global cooling as significant as global warming
17.06.2013 | Newcastle University
... two engines aircraft project “Elektro E6”.
The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.
EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...
Siemens scientists have developed new kinds of ceramics in which they can embed transformers.
The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.
The new technology was developed in cooperation with industrial and research partners who ...
Cheaper clean-energy technologies could be made possible thanks to a new discovery.
Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...
The Fraunhofer Institute for Laser Technology ILT generated a lot of interest at the LASER World of Photonics 2013 trade fair with its numerous industrial laser technology innovations.
Its highlights included beam sources and manufacturing processes for ultrashort laser pulses as well as ways to systematically optimize machining processes using computer simulations. There was even a specialist booth at the fair dedicated to the revolutionary technological potential of digital photonic production.
Now in its fortieth year, LASER World ...
It's not reruns of "The Jetsons", but researchers working at the National Institute of Standards and Technology (NIST) have developed a new microscopy technique that uses a process similar to how an old tube television produces a picture—cathodoluminescence—to image nanoscale features.
Combining the best features of optical and scanning electron microscopy, the fast, versatile, and high-resolution technique allows scientists to view surface and subsurface features potentially as small as 10 nanometers in size.
The new microscopy technique, described in the journal AIP Advances,* uses a beam of electrons to excite a specially ...
17.06.2013 | Studies and Analyses
17.06.2013 | Health and Medicine
17.06.2013 | Life Sciences
14.06.2013 | Event News
13.06.2013 | Event News
10.06.2013 | Event News