Potentially harmful arsenic levels have been found in private water wells in towns across Maine where elevated arsenic risks were not previously suspected. Arsenic levels in some private wells exceeded the federal safety standard for public drinking water by ten to one-hundred times or more, according to findings released today by the U.S. Geological Survey. The study is the largest of its kind in Maine.
“We found large differences in concentrations from well to well, even at the town level, so residents need to test their wells to know their arsenic level,” said USGS scientist Martha Nielsen, who led the study in cooperation with the Maine Center for Disease Control and Prevention. “We are working with the Maine CDC to identify towns throughout the state where elevated arsenic levels are common but have gone mostly unnoticed.”
"The USGS has been working nationwide for many years to test groundwater for arsenic,” said Robert M. Lent, Director of the USGS Maine Water Science Center in Augusta. “Arsenic levels in this study are some of the highest we have seen in private wells,” said Lent. “Nearly half of Maine’s population use private wells for drinking water, so this issue quite literally hits home for many people.”
“It only takes one person in a town to be an advocate and champion to encourage fellow citizens to have their wells tested. The variability in arsenic concentrations, even at the town level, shows that testing is crucial for homeowners in assessing personal risk,” said Lent.
The Maine CDC is distributing posters and brochures to selected town offices based on the proportion of residents on private wells and information about the presence of wells with arsenic. The Maine CDC has worked in partnership with towns throughout Maine to prevent the spread of diseases.
“This mapping effort is helping us to better target our efforts to promote testing of private wells for arsenic,” said State Toxicologist Andrew Smith with the Maine CDC. “Statewide only about 40 percent of private water well owners have tested for arsenic, so it is crucial that we target our resources to the highest risk areas and nearby areas where we lack data,” said Smith.
For this study, scientists examined data from more than 11,000 wells in 530 cities, towns, and townships in Maine. Data came from water samples submitted to the Maine Health and Environmental Testing Laboratory between 2005 and 2009.
Arsenic levels ranged from less than the detection limit of 0.5 micrograms/liter (ug/L) to 3,100 ug/L. The federal safety standard for public drinking water is 10 ug/L.
Test results were summarized at the town level to produce maps showing arsenic concentrations by town where sufficient samples were collected. The maps provide a much greater spatial resolution of arsenic in private wells across the state than have previous efforts.
“This study confirmed many areas already known to have high levels of arsenic in groundwater and revealed for the first time, towns that should be further investigated,” said Nielsen. “Several towns in eastern Washington and central Penobscot counties, and in the southern parts of Piscataquis and Somerset counties have elevated arsenic that is more widespread than we realized.”
Even though the study included more than 11,000 wells, this is a relatively small sample of all the private wells in Maine.
“This study shows the difficulty of predicting arsenic concentrations at the local level and should signal to everyone with a private well that the only way to know about arsenic concentrations in their well is to have their water tested,” said Nielsen.
Most towns with more than 20 wells in the database had at least one well with arsenic levels greater than the safety standard. In a few towns, more than 50 percent of the sampled wells had arsenic levels greater than the safety standard. In considering these data, it is important to understand that the wells do not represent a random sample of the state. These data, however, provide a better indicator of potential arsenic hotspots than any other dataset.
"Geology is probably the biggest factor in the distribution of arsenic in private wells,” said Nielsen. “But the degree of local variability means that we can't simply use bedrock type to determine all the areas in the state where it is critical that people test their wells.”
Drinking water with arsenic above safety standards has been linked to an increased risk for skin, bladder, and lung cancer; to reproductive and developmental problems; diabetes; and effects on the immune system. Private water wells are not regulated under the federal Safe Drinking Water Act and well owners typically are responsible for testing the quality of their drinking water.
Elevated arsenic levels are not limited to Maine. A recent national USGS study found arsenic concentrations above the federal drinking water standard in more than 10 percent of private wells in New England’s bedrock aquifers compared to about 7 percent of private wells nationwide.
Private well owners can contact the Maine Drinking Water Program for guidance and information about well maintenance, testing, and in-home water treatment options. Access the USGS Maine Water Science Center for more information about water in Maine. Information about water quality nationwide is found on the USGS National Water-Quality Assessment Program site.
Diane Noserale | EurekAlert!
NASA examines newly formed Tropical Depression 3W in 3-D
26.04.2017 | NASA/Goddard Space Flight Center
Early organic carbon got deep burial in mantle
25.04.2017 | Rice University
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
20.04.2017 | Event News
18.04.2017 | Event News
03.04.2017 | Event News
26.04.2017 | Materials Sciences
26.04.2017 | Agricultural and Forestry Science
26.04.2017 | Physics and Astronomy