Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Researchers use satellites to measure inland floods

19.12.2008
Satellites that were designed to measure sea level over the world's oceans can serve a valuable purpose over land, a new study has found.

Researchers used NASA's TOPEX/Poseidon satellite and the European Space Agency's ENVISAT satellite to measure the height and extent of flooding in North America, South America, and Asia.

The study shows that satellites can supplement the measurements that the United States Geological Survey (USGS) gathers from flood gauges on the ground -- at little or no cost, said C.K. Shum, professor of earth sciences at Ohio State University.

"After a flood, we can look back at the satellite data to pinpoint when the flood began, and find out how far the flood waters extended, which is really important for flood modeling," he said.

Satellites such as TOPEX/Poseidon measure the height of land or water by bouncing radio signals off of surfaces and measuring how long the signals take to return. Rough surfaces scatter some of the signal in other directions, and cause errors in a satellite's on board tracking system. This often happens over land. Scientists use "re-tracking" software to fix the errors, and make the satellite's measurements more precise.

That's what the Ohio State software does -- it re-tracks the satellite data, but in a way that enables detailed measurements of water on land.

The key to the software is an algorithm that can tell the difference between water and snow cover. Ohio State postdoctoral researcher Hyongki Lee developed the algorithm and graduate student Manman Zhang applied the algorithm for her doctoral thesis.

Zhang presented the work in a poster session at the American Geophysical Union meeting in San Francisco.

Shum, Zhang, and their colleagues used the software to process TOPEX/Poseidon data from the 1997 Red River flood in the upper Midwest of the United States, an area with abundant farmland and wetlands. They detected flooded regions within four river basins: the Red River Basin in North Dakota and Minnesota; the Missouri River Basin in North Dakota and South Dakota; and the Minnesota River Basin and the Mississippi River Basin, both in Minnesota and Iowa.

The flood happened in April of that year, as winter snows began to melt. Zhang's algorithm differentiated between the scattered radar signal produced by water and by areas still covered by snow. As the floodwaters began to move down the Red River, the satellite measurements provided estimates of flood levels.

After re-tracking, the satellite data agreed with USGS ground measurements taken at the time. For example, the software determined that flood waters in Grand Forks, North Dakota, rose 20 feet (6 meters), which matched data recorded from flood gauges there.

The researchers did the same for the June 2008 Iowa City flood that killed three people and damaged 2 million acres of farmland. They found that they could track the ebb and flow of that flood over a scale of several hours. For that part of the study, they worked with Carrie Huitger, a USGS hydrologist who supplied the flood gauge data.

They performed similar studies with TOPEX/Poseidon data for a flood in the Amazon River Basin, and with ENVISAT data for a flood in southwestern Taiwan -- both with similar results.

The satellites can't be used to forecast a flood because the data isn't processed very quickly and the spatial coverage of the satellite measurements is limited, Shum explained. Even preliminary processing takes hours. But after a flood, such data can add to data collected on the ground, to help scientists better understand how floods happen.

Next, the researchers want to automate the software so that it can build an archive of flood data. Since the satellites are already in orbit collecting the data, there would be little cost beyond building the database and enabling scientists to access it.

In the future, a new satellite may enable more extensive and detailed measurements. Ohio State scientists lead an international team that has proposed the Surface Water Ocean Topography (SWOT) mission. The SWOT satellite will feature dual antennas that will gather high-resolution data over a much wider surface of the earth than is possible with today's satellites.

Collaborators on this project include Doug Alsdorf, associate professor of earth sciences, and Frank Schwartz, professor and Ohio Eminent Scholar in Hydrogeology.

This work was funded by the National Science Foundation and NASA.

C.K. Shum | EurekAlert!
Further information:
http://www.osu.edu

More articles from Earth Sciences:

nachricht Climate change weakens Walker circulation
20.10.2017 | MARUM - Zentrum für Marine Umweltwissenschaften an der Universität Bremen

nachricht Shallow soils promote savannas in South America
20.10.2017 | Senckenberg Forschungsinstitut und Naturmuseen

All articles from Earth Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Neutron star merger directly observed for the first time

University of Maryland researchers contribute to historic detection of gravitational waves and light created by event

On August 17, 2017, at 12:41:04 UTC, scientists made the first direct observation of a merger between two neutron stars--the dense, collapsed cores that remain...

Im Focus: Breaking: the first light from two neutron stars merging

Seven new papers describe the first-ever detection of light from a gravitational wave source. The event, caused by two neutron stars colliding and merging together, was dubbed GW170817 because it sent ripples through space-time that reached Earth on 2017 August 17. Around the world, hundreds of excited astronomers mobilized quickly and were able to observe the event using numerous telescopes, providing a wealth of new data.

Previous detections of gravitational waves have all involved the merger of two black holes, a feat that won the 2017 Nobel Prize in Physics earlier this month....

Im Focus: Smart sensors for efficient processes

Material defects in end products can quickly result in failures in many areas of industry, and have a massive impact on the safe use of their products. This is why, in the field of quality assurance, intelligent, nondestructive sensor systems play a key role. They allow testing components and parts in a rapid and cost-efficient manner without destroying the actual product or changing its surface. Experts from the Fraunhofer IZFP in Saarbrücken will be presenting two exhibits at the Blechexpo in Stuttgart from 7–10 November 2017 that allow fast, reliable, and automated characterization of materials and detection of defects (Hall 5, Booth 5306).

When quality testing uses time-consuming destructive test methods, it can result in enormous costs due to damaging or destroying the products. And given that...

Im Focus: Cold molecules on collision course

Using a new cooling technique MPQ scientists succeed at observing collisions in a dense beam of cold and slow dipolar molecules.

How do chemical reactions proceed at extremely low temperatures? The answer requires the investigation of molecular samples that are cold, dense, and slow at...

Im Focus: Shrinking the proton again!

Scientists from the Max Planck Institute of Quantum Optics, using high precision laser spectroscopy of atomic hydrogen, confirm the surprisingly small value of the proton radius determined from muonic hydrogen.

It was one of the breakthroughs of the year 2010: Laser spectroscopy of muonic hydrogen resulted in a value for the proton charge radius that was significantly...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ASEAN Member States discuss the future role of renewable energy

17.10.2017 | Event News

World Health Summit 2017: International experts set the course for the future of Global Health

10.10.2017 | Event News

Climate Engineering Conference 2017 Opens in Berlin

10.10.2017 | Event News

 
Latest News

Terahertz spectroscopy goes nano

20.10.2017 | Information Technology

Strange but true: Turning a material upside down can sometimes make it softer

20.10.2017 | Materials Sciences

NRL clarifies valley polarization for electronic and optoelectronic technologies

20.10.2017 | Interdisciplinary Research

VideoLinks
B2B-VideoLinks
More VideoLinks >>>