Darby formed off the western Mexico coast south of the Gulf of Tehuantepec. At 5 p.m. EDT on June 22 Darby was located about 540 miles south-southeast of Salina Cruz, Mexico. That's near 11.5 North and 94.0 West.
Earlier on June 22, at 19:23 UTC (3:23 p.m. EDT), NASA's Aqua satellite flew over the low pressure area that became classified as Tropical Depression Darby and provided forecasters with a look at the convection happening in the storm. Infrared satellite imagery from the Atmospheric Infrared Sounder (AIRS) instrument indicated a large area of strong convection to the north of Darby's center where cloud tops were as cold as or colder than -63 degrees Fahrenheit. Infrared satellite data is helpful to forecasters in determining the convection (rapidly rising air that condenses and forms clouds and thunderstorms). Strong convection, like that seen in Darby is indicative of a strengthening tropical cyclone.
Darby's maximum sustained winds had increased to 40 mph with higher gusts by 5 a.m. EDT on June 23. Tropical storm-force winds extend outward up to 50 miles to the west of the center. Additional strengthening is also expected in the next 48 hours. Estimated minimum central pressure is 1005 millibars.
Darby is moving to the northwest near 9 mph, but is expected to turn toward the west-northwest and then west over the next day. Residents from Acapulco north to Manzanillo, Mexico should watch the track of Darby over the next several days.
Rob Gutro | EurekAlert!
Ice cave in Transylvania yields window into region's past
28.04.2017 | National Science Foundation
Citizen science campaign to aid disaster response
28.04.2017 | International Institute for Applied Systems Analysis (IIASA)
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
28.04.2017 | Event News
20.04.2017 | Event News
18.04.2017 | Event News
28.04.2017 | Medical Engineering
28.04.2017 | Earth Sciences
28.04.2017 | Life Sciences