Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Impact study: Princeton model shows fallout of a giant meteorite strike

20.10.2011
Seeking to better understand the level of death and destruction that would result from a large meteorite striking the Earth, Princeton University researchers have developed a new model that can not only more accurately simulate the seismic fallout of such an impact, but also help reveal new information about the surface and interior of planets based on past collisions.

Princeton researchers created the first model to take into account Earth's elliptical shape, surface features and ocean depths in simulations of how seismic waves generated by a meteorite collision would spread across and within the planet. Current projections rely on models of a featureless spherical world with nothing to disrupt the meteorite's impact, the researchers report in the October issue of Geophysical Journal International.

The researchers -- based in the laboratory of Jeroen Tromp, the Blair Professor of Geology in Princeton's Department of Geosciences -- simulated the meteorite strike that caused the Chicxulub crater in Mexico, an impact 2 million times more powerful than a hydrogen bomb that many scientists believe triggered the mass extinction of the dinosaurs 65 million years ago. The team's rendering of the planet showed that the impact's seismic waves would be scattered and unfocused, resulting in less severe ground displacement, tsunamis, and seismic and volcanic activity than previously theorized.

The Princeton simulations also could help researchers gain insight into the unseen surface and interior details of other planets and moons, the authors reported. The simulations can pinpoint the strength of the meteorite's antipodal focus -- the area of the globe opposite of the crater where the energy from the initial collision comes together like a second, smaller impact. The researchers found this point is determined by how the features and composition of the smitten orb direct and absorb the seismic waves. Scientists could identify the planet or moon's characteristics by comparing a crater to the remnants of the antipodal point and calculating how the impact waves spread.

Lead author Matthias Meschede of the University of Munich developed the model at Princeton through the University's Visiting Student Research Collaborators program with co-authors Conor Myhrvold, who earned his bachelor's degree from Princeton in 2011, and Tromp, who also is director of Princeton's Institute for Computational Science and Engineering and a professor of applied and computational mathematics. Meschede describes the findings as follows:

"We have developed the first model to account for how Earth's surface features and shape would influence the spread of seismic activity following a meteorite impact. For the Earth, these calculations are usually made using a smooth, perfect sphere model, but we found that the surface features of a planet or a moon have a huge effect on the aftershock a large meteorite will have, so it's extremely important to take those into account.

"After a meteorite impact, seismic waves travel outward across the Earth's surface like after a stone is thrown in water. These waves travel all the way around the globe and meet in a single point on the opposite side from the impact known as the antipode. Our model shows that because the Earth is elliptical and its surface is heterogeneous those waves travel with different speeds in different areas, changing where the waves end up on the other side of the world and the waves' amplitude when they get there. These waves also are influenced by the interior. The effect on the opposite side is a result of the complete structure.

"We began by asking whether the meteorite that hit the Earth near Chicxulub could be connected to other late-Cretaceous mass-extinction theories. For example, there's a prominent theory that the meteorite triggered huge volcanic eruptions that changed the climate. These eruptions are thought to have originated in the Deccan Traps in India, approximately on the opposite side of the Earth from the Chicxulub crater at the time. Because North America was closer to Europe and India was closer to Madagascar during the Cretaceous period, however, it seemed questionable that the Deccan Traps were at the Chicxulub impact's antipode.

"Regarding the mass extinction, we saw from our measurements that a Chicxulub-sized impact alone would be too small to cause such a large volcanic eruption as what occurred at the Deccan Traps. Our model shows that the antipodal focusing of the seismic wave from such an impact was hugely overestimated in previous calculations, which used a spherical-Earth model.

"The Earth's maximum ground displacement at this point has been calculated to be 15 meters, which is extreme. The first outcome of our model was that this is reduced by a large amount to about three to five meters. On the spherical model, all the waves come together at exactly one point and, as a result, have a huge amplitude. We found the waves are disturbed by surface features and take on a more ragged structure, meaning less energy is concentrated at the antipode.

"But our results go beyond Chicxulub. We can, in principle, now estimate how large a meteorite would have to have been to cause catastrophic events. For instance, we found that if you increase the radius of the Chicxulub meteorite by a factor of five while leaving its velocity and density the same, it would have been large enough to at least fracture rocks on the opposite side of the planet. Our model can be used to estimate the magnitude and effect of other major impacts in Earth's past. A similar model could be used to study other examples of antipodal structures in the solar system, such as the strange region opposite the gigantic Caloris Basin crater on Mercury.

"Also, such a model can help examine the interior of a moon or planet by comparing the size of the crater to the amount of antipodal disruption -- you only need two pictures, basically. One could correlate a certain impact magnitude with the observed antipodal effect -- which is dependent on the object's surface features -- and better understand the heterogeneity of the surface by how the energy was distributed between those two points. That can reveal information about not only the surface structure of the body at the time of the impact, but also the interior, such as if the planet has a hard core."

Meschede is available to discuss his research with interested members of the news media and can be contacted at matthias.meschede@gmail.com, or through Princeton science writer Morgan Kelly at (609) 258-5729, or mgnkelly@princeton.edu.

This research was supported by the National Science Foundation and the German Academic Exchange Service.

Morgan Kelly | EurekAlert!
Further information:
http://www.princeton.edu/main/news/archive/S31/90/32S94/
http://www.princeton.edu

More articles from Earth Sciences:

nachricht From volcano's slope, NASA instrument looks sky high and to the future
27.04.2017 | NASA/Goddard Space Flight Center

nachricht Penn researchers quantify the changes that lightning inspires in rock
27.04.2017 | University of Pennsylvania

All articles from Earth Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Making lightweight construction suitable for series production

More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.

Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...

Im Focus: Wonder material? Novel nanotube structure strengthens thin films for flexible electronics

Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.

"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...

Im Focus: Deep inside Galaxy M87

The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.

Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...

Im Focus: A Quantum Low Pass for Photons

Physicists in Garching observe novel quantum effect that limits the number of emitted photons.

The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...

Im Focus: Microprocessors based on a layer of just three atoms

Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.

Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Expert meeting “Health Business Connect” will connect international medical technology companies

20.04.2017 | Event News

Wenn der Computer das Gehirn austrickst

18.04.2017 | Event News

7th International Conference on Crystalline Silicon Photovoltaics in Freiburg on April 3-5, 2017

03.04.2017 | Event News

 
Latest News

Bare bones: Making bones transparent

27.04.2017 | Life Sciences

Study offers new theoretical approach to describing non-equilibrium phase transitions

27.04.2017 | Physics and Astronomy

From volcano's slope, NASA instrument looks sky high and to the future

27.04.2017 | Earth Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>