On August 15, 2007, a magnitude 8.0 earthquake struck in Central Peru, killing more than 500 people—primarily in the town of Pisco, which was heavily damaged by the temblor—and triggering a tsunami that flooded Pisco's shore and parts of Lima's Costa Verde highway. The rupture occurred as the Nazca tectonic plate slipped underneath the South American plate in what is known as a subduction zone.
Soon thereafter, Hugo Perfettini—a former postdoctoral scholar with the Tectonics Observatory at the California Institute of Technology (Caltech), now at the Institut de Recherche pour le Développement in France—deployed an array of GPS stations in southern Peru. They were used to measure the postseismic deformation—the deformation that occurred in the first year after the earthquake.
When the research team—made up of a collaboration of scientists at the Caltech Tectonics Observatory and their partners in Peru and France—looked at the data from these GPS stations and compared them to the distribution of aftershocks in the area, they noticed something "amazing," says Jean-Philippe Avouac, director of the Tectonics Observatory and professor of geology at Caltech
The team's analysis of this data—and the conclusions they were able to draw as a result—are described in a paper in the May 6 issue of the journal Nature.
"After the earthquake, the plate interface slipped quite a bit," Avouac says. "But the aftershocks were tiny compared to the displacement. In other words, there was a lot of deformation, but most of it was aseismic." (Aseismic slippage, or aseismic creep, is movement along a fault that occurs without any accompanying seismic waves.)
This was contrary to what had long been assumed about plate movement in the area. "We used to think the plate interface at a subduction zone—which extends in this case from the surface to a depth of about 40 kilometers—was only slipping during large earthquakes," Avouac explains. "In Peru, 50 percent of the slippage within this range of depth is actually aseismic."
"This large area of aseismic slip is good news," he says. "It lowers the seismic hazard in that region, and allows us to be a little bit predictive. We cannot tell you when there will be an earthquake, but we can tell you where there is stress buildup, and where there is no stress buildup. Where there is no stress buildup, there will be no seismic rupture. That is where the earthquakes are going to stop."
The lessons learned in Peru, Avouac says, should be generalizable to just about any subduction zone—Sumatra, for instance, or Chile—and probably to any other kind of fault as well. And so Avouac—along with Nadia Lapusta, associate professor of mechanical engineering and geophysics at Caltech, and postdoctoral scholar Yoshihiro Kaneko from the Scripps Institution of Oceanography, who worked on this project while doing his PhD at Caltech—decided to look at "the long-term evolution of slip on a model fault where two seismogenic, locked segments are separated by an aseismically slipping patch where rupture is impeded," they explain in a paper recently published online in the journal Nature Geoscience.
When the locked segments (i.e., the areas in which stress builds up, and which produce earthquakes when they rupture) are far apart—or if the intervening aseismic area has frictional characteristics that make aseismic slip easy—they "tend to rupture independently," says Avouac. If they are very close together, they tend to interact and eventually break together.
The interesting question, Avouac says, is what we can expect to happen when the two segments are close, but not too close—and are separated by an aseismic area, as was seen in the Peru patchwork. By looking at what geologists call interseismic coupling—"the fraction of sliding that is aseismic and occurs between earthquakes," explains Avouac—and by factoring in distance, time, and the sliding speed, the team was able to determine whether an earthquake that begins in one locked area is likely to stop when it hits an aseismic barrier, or whether it will be able to cross that barrier and rupture the segment on the other side.
"This model demonstrates that, based on geodetic monitoring of a subduction zone, we can not only locate the places that are accommodating plate motion through slow, aseismic slip, but also determine the probability that they will be able to arrest seismic ruptures," says Lapusta.
The hope, Avouac adds, is that this sort of modeling can be applied to data derived from actual subduction zones. "We want to create models that will take into account the physical properties of a fault to produce a scenario of how the system might evolve," he says, in much the same way that meteorologists forecast the weather.
"Our study opens the possibility of predicting patterns of large earthquakes that a fault system could produce on the basis of observations of its coupling," adds Kaneko, "and suggests that regions of low coupling may reveal permanent barriers to large earthquakes."
In addition to Avouac and Perfettini, the other authors on the Nature paper, "Seismic and aseismic slip on the Central Peru megathrust," were Pierre Soler, Francis Bondoux, Mohamed Chlieh, and Laurence Audin of the Institut de Recherche pour le Développement; Hernando Tavera of the Instituto Geofisico del Perú; Andrew Kositsky, a former Caltech undergraduate student, now at Ashima Research in Pasadena; Jean-Mathieu Nocquet of Géoazur in Valbonne, France; Anthony Sladen, a staff seismologist at Caltech; and Daniel Farber of the University of California, Santa Cruz. The work was supported by grants from the Institut de Recherche pour le Développement, the Gordon and Betty Moore Foundation (through the Caltech Tectonics Observatory), and the National Science Foundation (NSF).
The abstract of the Nature Geoscience paper, "Towards inferring earthquake patterns from geodetic observations of interseismic coupling," can be found at http://www.nature.com/ngeo/journal/v3/n5/abs/ngeo843.html. The work was funded by grants from the NSF and the Gordon and Betty Moore Foundation (through the Caltech Tectonics Observatory).
Visit the Caltech Media Relations website at http://media.caltech.edu.
Lori Oliwenstein | EurekAlert!
Ice cave in Transylvania yields window into region's past
28.04.2017 | National Science Foundation
Citizen science campaign to aid disaster response
28.04.2017 | International Institute for Applied Systems Analysis (IIASA)
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
28.04.2017 | Event News
20.04.2017 | Event News
18.04.2017 | Event News
28.04.2017 | Medical Engineering
28.04.2017 | Earth Sciences
28.04.2017 | Life Sciences