Siemens and POSCO E&C complete the Ansan power plant in South Korea

Siemens and its partner South Korean POSCO Engineering & Construction Co. Ltd. (POSCO E&C), an affiliate of POSCO, one of the largest steel companies in the world, completed the Ansan combined cycle power plant in a record time of 24 months from groundbreaking to first commercial operation date (COD). It is the fourth Siemens H-class-based combined-cycle power plant in commercial operation in Asia with an efficiency level of more than 60 percent. In addition to generating electricity, the plant will also provide district heating for the inhabitants of the city of Ansan. Combined heat and power production raises the overall fuel utilization factor to over 75 percent. Its NOx emissions of 7 ppm are the lowest in Korea. This makes the plant one of the most efficient and eco-friendly fossil-fuel-fired electricity generating plants in South Korea. The owner and operator of the plant is S-Power, headquartered in Ansan.

The Ansan CHP is located in the city of the same name in Gyeonggi-do province southwest of the capital Seoul. This liquefied natural gas (LNG) fired plant is the first H-class 2 +1 multi-shaft power plant in Korea and has an electrical capacity of 834 megawatts (MW). Siemens delivered the power island main equipment: two gas turbines of type SGT6-8000H, an SST6-5000 steam turbine, three hydrogen-cooled generators of type SGen6-2000H, and two heat recovery steam generators from BHI, South Korea, as well as the entire instrumentation and control technology, SPPA-T3000. Siemens will also supply the long-term service for the gas turbines.

“The trustful relationship developed with POSCO E&C made it possible to execute this highly efficient H-class power plant in a record time. Thus we are making an important contribution towards cost-efficient and environmentally friendly power supply in the Gyeonggi-do province at the right time to support the winter peak”, said Lothar Balling, head of the Business Unit Project Management Energy Solutions in the Siemens Energy Power Generation Division.

“Ansan CHP Project was developed by POSCO E&C, reflecting the long term electric power supply plans of the Korean Government. Further emphasis was put into selecting the most environmentally suitable technologies with the local environmental authorities of Ansan City in a process covering a period of two years,” said Mr. Sung-Taek Seo, POSCO E&C's Project Manager. “We selected the Siemens H-Class gas turbine technology and Siemens in-house basic engineering and project management capabilities in order to construct one of the most competitive power plants in Korea. As the results have shown, the Ansan power plant and the partnership with Siemens have proven to be a great success and a benchmark in the IPP market.”

Siemens has now sold fifteen SGT6-8000H gas turbines to South Korea for eight projects totaling over 6.3 GW installed CCPP capacity. Four H-class projects have been completed while four projects are still under construction. They are scheduled to commence operation in 2015 and 2017.

In October 2013, Siemens incorporated a new company, Siemens Energy Solutions Ltd. in Seoul/South Korea, which will act as its new Regional Headquarters to serve the Asian and Middle Eastern power plant solutions market out of the region.

For further information on Division Power and Gas, please see: www.siemens.com/about/power-gas

For further information on SGT-8000H gas turbine series, please see: ww.energy.siemens.com/hq/en/fossil-power-generation/gas-turbines/

Siemens AG (Berlin and Munich) Siemens AG (Berlin and Munich) is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for more than 165 years. The company is active in more than 200 countries, focusing on the areas of electrification, automation and digitalization. One of the world's largest producers of energy-efficient, resource-saving technologies, Siemens is No. 1 in offshore wind turbine construction, a leading supplier of combined cycle turbines for power generation, a major provider of power transmission solutions and a pioneer in infrastructure solutions as well as automation, drive and software solutions for industry. The company is also a leading provider of medical imaging equipment – such as computed tomography and magnetic resonance imaging systems – and a leader in laboratory diagnostics as well as clinical IT. In fiscal 2014, which ended on Sep-tember 30, 2014, Siemens generated revenue from continuing operations of €71.9 billion and net income of €5.5 billion. At the end of September 2014, the company had around 357,000 employees worldwide.

Further information is available on the Internet at www.siemens.com 

Reference Number: PR2015010090PGEN

Contact
Ms. Gerda Gottschick
Power and Gas Division
Siemens AG

Freyeslebenstr. 1

91058 Erlangen

Germany

Tel: +49 (9131) 18-85753

gerda.gottschick​​@siemens.com

All latest news from the category: Corporate News

Back to home

Comments (0)

Write a comment

Newest articles

The Sound of the Perfect Coating

Fraunhofer IWS Transfers Laser-based Sound Analysis of Surfaces into Industrial Practice with “LAwave”. Sound waves can reveal surface properties. Parameters such as surface or coating quality of components can be…

Customized silicon chips

…from Saxony for material characterization of printed electronics. How efficient are new materials? Does changing the properties lead to better conductivity? The Fraunhofer Institute for Photonic Microsystems IPMS develops and…

Acetylation: a Time-Keeper of glucocorticoid Sensitivity

Understanding the regulatory mechanism paves the way to enhance the effectiveness of anti-inflammatory therapies and to develop strategies to counteract the negative effects of stress- and age-related cortisol excess. The…

Partners & Sponsors