Forum for Science, Industry and Business
Sponsored by:     Siemens     3M    n-tv
Search our Site:

Topic (optional):

 

Home Reports Automotive Engineering Content

Carnegie Mellon methods keep bugs out of software for self-driving cars

next article
22.06.2011

Analysis verifies safety of distributed car control system

 

Driver assistance technologies, such as adaptive cruise control and automatic braking, promise to someday ease traffic on crowded routes and prevent accidents. Proving that these automated systems will work as intended is a daunting task, but computer scientists at Carnegie Mellon University have now demonstrated it is possible to verify the safety of these highly complex systems.


To do so, the researchers first developed a model of a distributed car control system in which computers and sensors in each car combine to control acceleration, braking and lane changes, as well as entering and exiting the highway. They then used mathematical methods to formally verify that the system design would keep cars from crashing into each other.

"The system we created is in many ways one of the most complicated cyber-physical systems that has ever been fully verified formally," said Andre Platzer, an assistant professor of computer science. He and his collaborators, Ph.D. students Sarah M. Loos and Ligia Nistor, will present their findings at the International Symposium on Formal Methods, June 22 at the University of Limerick, Ireland.

"Auto accidents cost society billions of dollars and too many lives, so automated systems that could increase both the safety and efficiency of our roads only make sense," Platzer said. "It would be foolish to move to such a system, however, unless we can be certain that it won't create problems of its own. The dynamics of these systems have been beyond the scope of previous formal verification techniques, but we've had success with a modular approach to detecting design errors in them."

Formal verification methods are routinely used to find bugs in computer circuitry and software; Platzer is a leader in developing new techniques to verify complex computer-controlled devices such as aircraft collision avoidance systems and robotic surgery devices, known collectively as cyber-physical systems, or hybrid systems. He also is a member of the Computational Modeling and Analysis of Complex Systems (CMACS) center, a CMU-based initiative sponsored by the National Science Foundation to apply verification techniques to a variety of complex biological or physical systems.

Using these formal methods to either find errors in automated vehicle control or prove they are safe is particularly challenging, Platzer said. Like other cyber-physical systems, they must take into account both physical laws and the capabilities of the system's hardware and software. But vehicle control systems add another layer of complexity because they are distributed systems — that is, no single computer is ultimately in control, but rather each vehicle makes decisions in concert with other vehicles sharing the same road.

Platzer, Loos and Nistor showed that they could verify the safety of their adaptive cruise control system by breaking the problem into modular pieces and organizing the pieces in a hierarchy. The smallest piece consists of just two cars in a single lane. Building on that, they were able to prove that the system is safe for a single lane with an arbitrary number of cars, and ultimately for a highway with an arbitrary number of lanes. Likewise, they were able to show that cars could safely merge in and out of a single lane and then extended it to prove that cars could safely merge across a multi-lane highway.

Platzer cautioned that this proof has a major limitation — it only applies to straight highway. Addressing the problem of curved lanes, sensory inaccuracy and time synchronization are among the issues that will be a focus of future work. The methods the Carnegie Mellon researchers developed can, however, be generalized to other system designs or to variations in car dynamics.

"Any implementation of a distributed car control system would be more complicated than the model we developed," Platzer said. "But now at least we know that these future systems aren't so complex that we can't verify their safety."

This research was supported by the National Science Foundation and the Office of Naval Research. Follow the Carnegie Mellon School of Computer Science on Twitter @SCSatCMU.

About Carnegie Mellon University: Carnegie Mellon (www.cmu.edu) is a private, internationally ranked research university with programs in areas ranging from science, technology and business, to public policy, the humanities and the arts. More than 11,000 students in the university's seven schools and colleges benefit from a small student-to-faculty ratio and an education characterized by its focus on creating and implementing solutions for real problems, interdisciplinary collaboration and innovation. A global university, Carnegie Mellon's main campus in the United States is in Pittsburgh, Pa. It has campuses in California's Silicon Valley and Qatar, and programs in Asia, Australia, Europe and Mexico. The university is in the midst of a $1 billion fundraising campaign, titled "Inspire Innovation: The Campaign for Carnegie Mellon University," which aims to build its endowment, support faculty, students and innovative research, and enhance the physical campus with equipment and facility improvements.

Byron Spice | Source: EurekAlert!
Further information: www.cmu.edu

next article

More articles from Automotive Engineering:

nachricht Los Alamos catalyst could jumpstart e-cars, green energy
05.06.2013 | DOE/Los Alamos National Laboratory

nachricht New Speaker System for Cars Creates Separate “Audio Zones” for Front and Rear Seats
03.06.2013 | Acoustical Society of America (ASA)

All articles from Automotive Engineering >>>
The most recent press releases about innovation >>>

Overview of the latest five Focus news of the innovations-report:
In the focus: EADCO and PC-Aero present at the Paris Airshow for the first time the full electric 6 seats ....

... two engines aircraft project “Elektro E6”.

The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.

EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...

In the focus: Ceramic Transformer Integrates Power Supply Unit

Siemens scientists have developed new kinds of ceramics in which they can embed transformers.

The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.

The new technology was developed in cooperation with industrial and research partners who ...

In the focus: Nanoparticle Opens the Door to Clean-Energy Alternatives

Cheaper clean-energy technologies could be made possible thanks to a new discovery.

Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...

In the focus: Fraunhofer ILT heads toward digital photonic production

The Fraunhofer Institute for Laser Technology ILT generated a lot of interest at the LASER World of Photonics 2013 trade fair with its numerous industrial laser technology innovations.

Its highlights included beam sources and manufacturing processes for ultrashort laser pulses as well as ways to systematically optimize machining processes using computer simulations. There was even a specialist booth at the fair dedicated to the revolutionary technological potential of digital photonic production.

Now in its fortieth year, LASER World ...

In the focus: New quantum dot technique combines best of optical and electron microscopy

It's not reruns of "The Jetsons", but researchers working at the National Institute of Standards and Technology (NIST) have developed a new microscopy technique that uses a process similar to how an old tube television produces a picture—cathodoluminescence—to image nanoscale features.

Combining the best features of optical and scanning electron microscopy, the fast, versatile, and high-resolution technique allows scientists to view surface and subsurface features potentially as small as 10 nanometers in size.

The new microscopy technique, described in the journal AIP Advances,* uses a beam of electrons to excite a specially ...

All Focus news of the innovations-report >>>

B2B Search

Product / Service
Company / Organisation

Latest News

Printing artificial bone

18.06.2013 | Materials Sciences

Artificial Sweetener a Potential Treatment for Parkinson's Disease

18.06.2013 | Health and Medicine

New way to improve antibiotic production

18.06.2013 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>

Event News

International Symposium on Morphogenesis

14.06.2013 | Event News

ESMT Annual Forum: CEOs discuss “The Future of Jobs” with international academics and policymakers

13.06.2013 | Event News

Invitation: Mathematics for Industry and Society in the French Embassy Berlin, 04. - 05.07.2013

10.06.2013 | Event News