Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Researcher tracks agricultural overuse of bug-killing technology

01.03.2012
High corn prices are leading many growers to plant corn every year and to overuse pesticides and other bug-killing technology to maximize yields, researchers report.

In many instances, pesticides are applied without scouting fields to see if they are needed, violating a bedrock principle of integrated pest management. The result is a biological diversity desert in many corn and soybean fields in the agricultural Midwest, and signs that the surviving insects are becoming resistant to several key bug-fighting tools now available to farmers.

University of Illinois crop sciences professor Michael Gray and his colleagues conducted a survey of corn and soybean pests in 47 counties in Illinois from late July to early August in 2011, and found densities of some key insect pests to be at zero or near zero in many counties.

“I’ve never seen anything like it in 22 years of doing this kind of research,” Gray said. “From an insect diversity perspective, it’s a biological desert in many of those fields.” Even western corn rootworm adults (which normally lay their eggs in cornfields in late summer) were difficult to find in many counties, he said.

In part, these low numbers are the result of environmental conditions – particularly wet springs – the past few years, Gray said. However, the widespread use of Bt-corn hybrids, which produce one or more insecticidal proteins, and the common practice of broadcasting mixes of insecticide and fungicide on corn and soybean fields also plays a role, he said.

And yet, when Gray asks farmers at growers’ meetings if they plan to use Bt corn again this year, a huge majority says yes.

“Many producers indicate that in order to have access to high yielding germplasm, the use of Bt hybrids is essential,” Gray said. “It is likely that many growers also will use a soil insecticide at planting, even though a Bt hybrid will be used.” This goes against decades of advice from researchers like Gray who argue for integrated pest management – the careful assessment of bug populations to determine what, if any, treatments are needed, and the use of changing tactics against adaptable pests such as the western corn rootworm and the European corn borer, either of which could devastate corn yields.

“We ask them to consider rotation with soybeans, to spray only when insects are present at levels that are likely to affect yield, and to not use Bt every season, or if they do, to get a different type of Bt corn, one that expresses a different Bt protein,” Gray said.

But instead of using integrated pest management, growers are relying on what he calls “insurance pest management,” throwing everything in their arsenal at the bugs to protect their crop, year after year.

“For corn in central Illinois, the average non-land costs – things like fertilizer, seed, crop insurance and machinery – come to about $513 an acre,” Gray said. Cash rent can add another $325 an acre for high-yield ground, he said. “So I think a lot of the growers see $20 to $25 dollars to apply a soil insecticide as pretty cheap insurance to protect that $850 investment.”

Landowners are raising rents in this competitive arena, some lenders encourage growers to do everything in their power to protect their yields, and federal incentives have lowered the cost of crop insurance for growers who use Bt corn, Gray said. So there are a lot of reasons for farmers to keep doing what they have been doing.

Most growers are not likely to be alarmed by the low number of bugs, but will instead see it as proof that their strategy works, Gray said. Other evidence, however, suggests that the short-term benefits will lead to unanticipated – and undesirable – consequences.

Researchers are already finding failures of Bt corn against the western corn rootworm in Iowa, Illinois, Minnesota and Nebraska, for example. In a study published in 2011 in the journal PLoS ONE, Aaron Gassmann and his colleagues at Iowa State University demonstrated that the offspring of western corn rootworms from rootworm-damaged cornfields in Iowa were less susceptible to a particular Bt toxin (Cry3Bb1, the type of Bt in use in the damaged fields) than the control population.

Gray has seen the same kind of severe rootworm damage in Illinois fields planted with the Cry3Bb1 variety of Bt corn, and he is collaborating with Gassmann on a new study of the Bt failures in Illinois. As yet, the researchers have not confirmed the cause of these Bt failures and are working to determine the mechanism.

“Like the fields Gassmann studied in Iowa, the failures here in Illinois are in fields planted in continuous corn for many years with no crop rotation, using that same Cry3Bb1 Bt protein over and over again,” Gray said.

Growers’ confidence in Bt corn probably stems from its great success against the European corn borer, a pest accidentally brought to the U.S. in the early 1900s. The insect arrived in Illinois in the late 1930s.

“It was a devastating pest,” Gray said. “It was a major yield robber.”
In a 2010 paper in Science, Gray and colleagues from several Midwestern universities reported that the introduction of Bt corn in 1996 led to a profound and lasting reduction of the European corn borer across the upper Midwest.

This success was in large part due to two factors, Gray said. First, it was relatively easy to get high levels of the Bt proteins in above-ground corn tissues, on which corn borers feed. And second, regulators required farmers who used Bt corn to provide large buffer zones, called refuges, planted with non-Bt corn. The refuges would supply a lot of Bt-susceptible insects to mate with those that survived exposure to Bt and were thus resistant to the toxin, to reduce the development of Bt-resistant strains.

Western corn rootworm larvae do the most damage to roots, however, and expression of Bt toxins in roots is much lower than in above-ground tissues. This means that the rootworms are getting a much lower dose of specific Cry toxins than the corn borers do, Gray said. Add to that the fact that some growers are ignoring the buffer requirement while also planting Bt corn year after year, he said, and you’ve got a recipe for resistance.

“We might not be having this conversation if corn was $3 a bushel and growers were asking us where to put their limited resources,” he said. “But with these high commodity prices the notion of adding inputs to squeeze out a couple of more bushels seems like cheap insurance.”

A paper describing corn producers’ failure to adopt integrated pest management practices appeared in the Sept. 27, 2010, Journal of Agricultural Food Chemistry. Gray will present his latest findings at the International Integrated Pest Management Symposium in Memphis, Tenn., in March 2012.

Editor’s notes: To reach Michael Gray, call: 217-333-6652; email: megray@illinois.edu.

The 2010 paper, “Relevance of Traditional Integrated Pest Management(IPM) Strategies for Commercial Corn Producers in a Transgenic Agroecosystem: A Bygone Era?” is available online or from the U. of I. News Bureau. A report on Michael Gray’s insect surveys in Illinois is available online

Diana Yates | University of Illinois
Further information:
http://www.illinois.edu

More articles from Agricultural and Forestry Science:

nachricht Faba fix for corn's nitrogen need
11.04.2018 | American Society of Agronomy

nachricht Wheat research discovery yields genetic secrets that could shape future crops
09.04.2018 | John Innes Centre

All articles from Agricultural and Forestry Science >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: BAM@Hannover Messe: innovative 3D printing method for space flight

At the Hannover Messe 2018, the Bundesanstalt für Materialforschung und-prüfung (BAM) will show how, in the future, astronauts could produce their own tools or spare parts in zero gravity using 3D printing. This will reduce, weight and transport costs for space missions. Visitors can experience the innovative additive manufacturing process live at the fair.

Powder-based additive manufacturing in zero gravity is the name of the project in which a component is produced by applying metallic powder layers and then...

Im Focus: Molecules Brilliantly Illuminated

Physicists at the Laboratory for Attosecond Physics, which is jointly run by Ludwig-Maximilians-Universität and the Max Planck Institute of Quantum Optics, have developed a high-power laser system that generates ultrashort pulses of light covering a large share of the mid-infrared spectrum. The researchers envisage a wide range of applications for the technology – in the early diagnosis of cancer, for instance.

Molecules are the building blocks of life. Like all other organisms, we are made of them. They control our biorhythm, and they can also reflect our state of...

Im Focus: Spider silk key to new bone-fixing composite

University of Connecticut researchers have created a biodegradable composite made of silk fibers that can be used to repair broken load-bearing bones without the complications sometimes presented by other materials.

Repairing major load-bearing bones such as those in the leg can be a long and uncomfortable process.

Im Focus: Writing and deleting magnets with lasers

Study published in the journal ACS Applied Materials & Interfaces is the outcome of an international effort that included teams from Dresden and Berlin in Germany, and the US.

Scientists at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) together with colleagues from the Helmholtz-Zentrum Berlin (HZB) and the University of Virginia...

Im Focus: Gamma-ray flashes from plasma filaments

Novel highly efficient and brilliant gamma-ray source: Based on model calculations, physicists of the Max PIanck Institute for Nuclear Physics in Heidelberg propose a novel method for an efficient high-brilliance gamma-ray source. A giant collimated gamma-ray pulse is generated from the interaction of a dense ultra-relativistic electron beam with a thin solid conductor. Energetic gamma-rays are copiously produced as the electron beam splits into filaments while propagating across the conductor. The resulting gamma-ray energy and flux enable novel experiments in nuclear and fundamental physics.

The typical wavelength of light interacting with an object of the microcosm scales with the size of this object. For atoms, this ranges from visible light to...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Invitation to the upcoming "Current Topics in Bioinformatics: Big Data in Genomics and Medicine"

13.04.2018 | Event News

Unique scope of UV LED technologies and applications presented in Berlin: ICULTA-2018

12.04.2018 | Event News

IWOLIA: A conference bringing together German Industrie 4.0 and French Industrie du Futur

09.04.2018 | Event News

 
Latest News

Quantum Technology for Advanced Imaging – QUILT

24.04.2018 | Information Technology

AWI researchers measure a record concentration of microplastic in arctic sea ice

24.04.2018 | Earth Sciences

Complete skin regeneration system of fish unraveled

24.04.2018 | Life Sciences

VideoLinks
Science & Research
Overview of more VideoLinks >>>