Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Researchers Find Ways to Turn Manure into Power

08.08.2005


Record oil prices and incentives to find alternative fuel sources are lighting a fire under research to turn biomass materials such as manure into energy.



Texas Senate Bill 20, signed this week by Gov. Rick Perry, compliments research under way to determine how and where biomass can be used. The new law requires more renewable energy to be developed and used in the next 10 years.

Combining consumer energy needs and agriculture industry trends with the legislation will push the research to become reality, said Dr. John Sweeten, resident director of the Texas Agricultural Experiment Station at the Texas A&M University System Agriculture Research and Extension Center here.


Researchers have long worked with manure as a fertilizer and have studied ways to convert it into energy, but this latest push of legislation and research should result in more energy projects becoming a reality, Sweeten said.

Research is concentrating on finding alternative uses for the growing supplies of manure, Sweeten said. Irrigated cropland use of manure as a fertilizer is dwindling, but the livestock industry is growing.

Other trends contributing to a potential excess are increasing imports of grain-based nutrients to feed the cattle; less irrigation water; and the switch to crops which use less water and require fewer nutrients.

"Things are in reasonable shape now, but in 10, 20 or 30 years from now, we need to have alternate uses that are not based exclusively on land application," he said.

Energy production has been researched for more than 20 years, but "$60 a barrel oil recruits a lot of interest in biomass," Sweeten said.

"The question becomes, how do you convert biomass into energy?" he said.

The solid feedlot waste presents a different challenge than the liquid waste from hog or dairy operations, Sweeten said. Researchers are trying to determine what process and what mix of the product will create the most useable heat and, as a result, energy.

For this study, composite samples of raw/mixed/uncomposted manure from the Experiment Station feedlot at Bushland have been sent for testing at several labs. The manure samples were harvested May 17-June 2 from two types of pens.

One set of pens were paved with fly-ash, a byproduct of the coal-fired power generating industry, and the other manure was from unpaved pens. The manure was composted and test results from the two showed a large difference for several constituents measured, especially ash content, Sweeten said.

Ash, an unusable material as far as energy is concerned, was lower in the composted manure samples from the paved pens than the dirt pens – 20.2 percent compared to 58.7 percent. As a result, the low-ash manure had about twice the organic matter and heating value, he said.

"The low-ash feedlot biomass would be much better fuel than high-ash feedlot biomass," Sweeten said. "The problem is, there is not that much of it in the commercial feedlots."

Large bulk samples from the compost pile that came from the paved pens will be tested further in a small-scale combustion testing project in College Station.

These test results will focus on using pulverized manure samples as reburn fuel in a secondary combustion chamber to lower the nitrogen oxides and specific metal emissions from coal-firing in the primary combustion chamber, Sweeten said.

Re-sampling will begin next week upon completion of 50 days of composting of the two windrows. The analysis will be repeated on the partially-composted manure to determine changes in fuel quality produced by more than six weeks of composting, he said.

Another research project involves using the byproduct combustion ash as a fertilizer or construction material, Sweeten said.

"By assuring year-round uses of manure, the cattle feed yards in this area could not only stay current on manure harvesting, but the fuel quality of manure improves with more frequent harvest," Sweeten said. "An even greater benefit is that frequent surface manure harvesting by scraping is an accepted method of dust control."

Dr. John Sweeten | EurekAlert!
Further information:
http://www.ag.tamu.edu

More articles from Agricultural and Forestry Science:

nachricht Researchers discover a new link to fight billion-dollar threat to soybean production
14.02.2017 | University of Missouri-Columbia

nachricht Important to maintain a diversity of habitats in the sea
14.02.2017 | University of Gothenburg

All articles from Agricultural and Forestry Science >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Microhotplates for a smart gas sensor

22.02.2017 | Power and Electrical Engineering

Scientists unlock ability to generate new sensory hair cells

22.02.2017 | Life Sciences

Prediction: More gas-giants will be found orbiting Sun-like stars

22.02.2017 | Physics and Astronomy

VideoLinks
B2B-VideoLinks
More VideoLinks >>>