Despite these recent uncertainties, 'up' is precisely the direction an Iowa State researcher believes agriculture is headed for at least the next 10 years.
Wally Huffman, professor in agricultural economics and Charles F. Curtiss Distinguished Professor in Agriculture and Life Sciences, predicts supply will go up, demand will go up, and real prices of grain and oilseeds also will go up.
"I'm very optimistic about the next 10 years," said Huffman.
Huffman presented his research to the Organization for Economic Co-operation and Development in Paris, France, last month. OECD and the Iowa Agricultural Experiment Station supported the research.
An important part of Huffman's study was the long-term trend of corn and soybean yields in Iowa, wheat in Kansas and France, rice in Japan and potatoes in the Netherlands. Huffman examined the trends and then made projections about the next decade.
The optimism starts with the producers.
"Prices right now for corn and soybeans are up about 50 percent relative to two years ago, so those are relatively good prices," he said. "That's good news for grain producers."
The impact that the rising demand for biofuels will have on the market for agricultural products is not entirely clear, but grain and oilseed prices will generally be higher than they would be without biofuels.
"Overall, biofuels are probably a good thing for farmers," he said. "However, there will be more erratic variation in grain and oilseed prices than there would be without biofuels," he said.
The main reasons are the erratic components to both supply and demand of crude oil.
While biofuels are pushing demand for grain and oilseeds up, Huffman says the long-term trend in supply of grain and oilseeds is due to new technologies that are being developed by the private sector and marketed to farmers.
"Supply is going up, and demand is going up," he said. "I think they will grow at a similar pace. There will be occasional spikes due to bad weather and abrupt restriction in crude oil production, but prices will come down. When they do, they will come down to similar levels to what they are now in real terms, and those are pretty good prices.
"For the past 100 years, on average, real agricultural product prices have been falling as technology has been allowing supply to increase faster than demand," he said.
But for the past decade, demand has been rising as quickly as supply, he added.
Yields for major field crops in major producing areas have been steadily increasing. There is no indication that the rate is slowing and no reason to fear falling crop yields. Huffman predicts that the rate of increase in yields for corn and soybeans in major production areas will rise much faster than it has in the past 50 years.
"In the case of corn, since 1955 the average rate of increase in Iowa crop yield has been two bushels, per acre, per year," said Huffman. "That's an amazing accomplishment starting from about 65 bushels, per acre, per year in 1955, up to about 165 bushels, per acre, per year now."
Huffman thinks the future will be even better.
"From 2010 to 2019, corn yields are going to increase quite substantially, maybe at four to six bushels, per acre, per year," he said.
Much of the increase will be due to genetic improvements in hybrid corn varieties associated with new, multiple stacking of genes for insect protection and herbicide tolerance that will permit a major increase in plant populations.
These improvements are the result of corn that has been genetically modified (GM) to have certain desirable traits.
Also, better equipment, improved farm management, and reduced- and no-till farming will contribute to rising corn yields in the Midwest.
Other commodities have also improved yield and will likely see continuing increases, according to Huffman.
Soybean yields in Iowa also are increasing, although less dramatically than corn, says Huffman.
The trend over the past 50 years is an increase of about .5 bushel, per acre, per year (bu/ac/yr). That rate of improvement in Iowa soybean yields will continue or possibly increase over the next decade. Current soybean yields are about 50 bu/ac/yr.
Kansas is the leading producer of wheat in the United States with yields of about 45 bu/ac/yr. Yields have been improving at about .5 bu/ac/yr since about 1950.
Farmers in France are producing wheat at about 113 bu/ac/yr. Yields are improving at more than 1.5 bu/ac/yr.
France is the leading wheat producer in the European Union, and Huffman attributes much of their production advantage to the French emphasis on wheat advantage. They are also showing faster production improvement. France often puts their best land into wheat production. Huffman predicts wheat yields may increase faster if GM wheat is more successful.
Japan is a major rice producer. Yields are improving at a rate of .5 bu/ac/yr, and are now at 113 bu/ac/yr compared to around 90 bu/ac/yr in 1960. GM rice has been tried, but has not measurably increased yields, according to Huffman.
Netherlands is the most advanced country in the world when it comes to potato production technology. Yields in the Netherlands have been increasing by about 4.6 bu/ac/yr over the last 50 years and are now at 670 bu/ac/yr.
"Potatoes are a major world food crop and they don't get a lot of attention," said Huffman. "They are consumed in large amounts in Europe and other places, including the United States, and yields are phenomenal."
Several variables will impact the future of crops.
According to Huffman, the biggest are:both private companies and government researchers are working on improving production
Wally Huffman | EurekAlert!
Ammonium nitrogen input increases the synthesis of anticarcinogenic compounds in broccoli
26.04.2017 | University of the Basque Country
New data unearths pesticide peril in beehives
21.04.2017 | Cornell University
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
28.04.2017 | Event News
20.04.2017 | Event News
18.04.2017 | Event News
28.04.2017 | Medical Engineering
28.04.2017 | Earth Sciences
28.04.2017 | Life Sciences