Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Waste cooking oil makes bioplastics cheaper

03.09.2012
'Bioplastics' that are naturally synthesized by microbes could be made commercially viable by using waste cooking oil as a starting material. This would reduce environmental contamination and also give high-quality plastics suitable for medical implants, according to scientists presenting their work at the Society for General Microbiology's Autumn Conference at the University of Warwick.

The Polyhydroxyalkanoate (PHA) family of polyesters is synthesized by a wide variety of bacteria as an energy source when their carbon supply is plentiful. Poly 3-hydroxybutyrate (PHB) is the most commonly produced polymer in the PHA family. Currently, growing bacteria in large fermenters to produce high quantities of this bioplastic is expensive because glucose is used as a starting material.

Work by a research team at the University of Wolverhampton suggests that using waste cooking oil as a starting material reduces production costs of the plastic. "Our bioplastic-producing bacterium, Ralstonia eutropha H16, grew much better in oil over 48 hours and consequently produced three times more PHB than when it was grown in glucose," explained Victor Irorere who carried out the research. "Electrospinning experiments, performed in collaboration with researchers from the University of Birmingham, showed that nanofibres of the plastic produced from oils were also less crystalline, which means the plastic is more suited to medical applications."

Previous research has shown that PHB is an attractive polymer for use as a microcapsule for effective drug delivery in cancer therapy and also as medical implants, due to its biodegradability and non-toxic properties. Improved quality of PHB combined with low production costs would enable it to be used more widely.

The disposal of used plastics - which are largely non-biodegradable - is a major environmental issue. Plastic waste on UK beaches has been steadily increasing over the past two decades and now accounts for about 60% of marine debris. "The use of biodegradable plastics such as PHB is encouraged to help reduce environmental contamination. Unfortunately the cost of glucose as a starting material has seriously hampered the commercialization of bioplastics," said Dr Iza Radecka who is leading the research. "Using waste cooking oil is a double benefit for the environment as it enables the production of bioplastics but also reduces environmental contamination caused by disposal of waste oil."

The next challenge for the group is to do appropriate scale-up experiments, to enable the manufacture of bioplastics on an industrial level.

Laura Udakis | EurekAlert!
Further information:
http://www.sgm.ac.uk

More articles from Materials Sciences:

nachricht Plant inspiration could lead to flexible electronics
22.06.2017 | American Chemical Society

nachricht A rhodium-based catalyst for making organosilicon using less precious metal
22.06.2017 | Tokyo Institute of Technology

All articles from Materials Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Climate satellite: Tracking methane with robust laser technology

Heatwaves in the Arctic, longer periods of vegetation in Europe, severe floods in West Africa – starting in 2021, scientists want to explore the emissions of the greenhouse gas methane with the German-French satellite MERLIN. This is made possible by a new robust laser system of the Fraunhofer Institute for Laser Technology ILT in Aachen, which achieves unprecedented measurement accuracy.

Methane is primarily the result of the decomposition of organic matter. The gas has a 25 times greater warming potential than carbon dioxide, but is not as...

Im Focus: How protons move through a fuel cell

Hydrogen is regarded as the energy source of the future: It is produced with solar power and can be used to generate heat and electricity in fuel cells. Empa researchers have now succeeded in decoding the movement of hydrogen ions in crystals – a key step towards more efficient energy conversion in the hydrogen industry of tomorrow.

As charge carriers, electrons and ions play the leading role in electrochemical energy storage devices and converters such as batteries and fuel cells. Proton...

Im Focus: A unique data centre for cosmological simulations

Scientists from the Excellence Cluster Universe at the Ludwig-Maximilians-Universität Munich have establised "Cosmowebportal", a unique data centre for cosmological simulations located at the Leibniz Supercomputing Centre (LRZ) of the Bavarian Academy of Sciences. The complete results of a series of large hydrodynamical cosmological simulations are available, with data volumes typically exceeding several hundred terabytes. Scientists worldwide can interactively explore these complex simulations via a web interface and directly access the results.

With current telescopes, scientists can observe our Universe’s galaxies and galaxy clusters and their distribution along an invisible cosmic web. From the...

Im Focus: Scientists develop molecular thermometer for contactless measurement using infrared light

Temperature measurements possible even on the smallest scale / Molecular ruby for use in material sciences, biology, and medicine

Chemists at Johannes Gutenberg University Mainz (JGU) in cooperation with researchers of the German Federal Institute for Materials Research and Testing (BAM)...

Im Focus: Optoelectronic Inline Measurement – Accurate to the Nanometer

Germany counts high-precision manufacturing processes among its advantages as a location. It’s not just the aerospace and automotive industries that require almost waste-free, high-precision manufacturing to provide an efficient way of testing the shape and orientation tolerances of products. Since current inline measurement technology not yet provides the required accuracy, the Fraunhofer Institute for Laser Technology ILT is collaborating with four renowned industry partners in the INSPIRE project to develop inline sensors with a new accuracy class. Funded by the German Federal Ministry of Education and Research (BMBF), the project is scheduled to run until the end of 2019.

New Manufacturing Technologies for New Products

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Plants are networkers

19.06.2017 | Event News

Digital Survival Training for Executives

13.06.2017 | Event News

Global Learning Council Summit 2017

13.06.2017 | Event News

 
Latest News

A new technique isolates neuronal activity during memory consolidation

22.06.2017 | Life Sciences

Plant inspiration could lead to flexible electronics

22.06.2017 | Materials Sciences

A rhodium-based catalyst for making organosilicon using less precious metal

22.06.2017 | Materials Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>