Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Behind-the-scenes advances underpin new super-strong plastics

21.10.2010
Long-awaited advances in reducing the cost of certain catalysts — substances that kick-start chemical reactions — have quietly led to production of super-strong forms of the world's most widely used plastics, according to the cover story of the current issue of Chemical & Engineering News (C&EN), ACS' weekly newsmagazine. These upgraded forms of polyethylene have led to availability of stronger, more durable consumer products ranging from garbage bags to camping cookware.

C&EN Senior Editor Alexander Tullo notes that the catalysts, called "metallocenes," engendered excitement years ago because they allowed production of stronger forms of polyethylene plastics.

The world's most widely used plastic, polyethylene is a mainstay in plastic shopping bags and other items. However, hopes that metallocene plastics would replace conventional polyethylene plastics faded because of the high costs of these catalysts.

The article describes a revival in the use of metallocenes and expanded marketing of super-strong polyethylene plastics.

The reason: New technologies have cut the catalysts' cost and fostered production of millions of tons of the new plastics.

They are found in products such as stronger garbage bags, improved packaging materials, more durable fuel tanks, and tougher artificial turf for football and soccer fields.

ARTICLE FOR IMMEDIATE RELEASE "Metallocenes Rise Again"

This story is available at http://pubs.acs.org/cen/coverstory/88/8842cover.html

Michael Bernstein | EurekAlert!
Further information:
http://www.acs.org

More articles from Materials Sciences:

nachricht Fraunhofer IFAM expands its R&D work on Coatings for protection against corrosion and marine growth
27.02.2017 | Fraunhofer IFAM

nachricht Serendipity uncovers borophene's potential
23.02.2017 | Northwestern University

All articles from Materials Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Safe glide at total engine failure with ELA-inside

27.02.2017 | Information Technology

Fraunhofer IFAM expands its R&D work on Coatings for protection against corrosion and marine growth

27.02.2017 | Materials Sciences

Stingless bees have their nests protected by soldiers

24.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>