In a move that would make the Alchemists of King Arthur's time green with envy, scientists have unraveled the formula for turning liquid cement into liquid metal. This makes cement a semi-conductor and opens up its use in the profitable consumer electronics marketplace for thin films, protective coatings, and computer chips.
"This new material has lots of applications including as thin-film resistors used in liquid-crystal displays, basically the flat panel computer monitor that you are probably reading this from at the moment," said Chris Benmore, a physicist from the U.S. Department of Energy's (DOE) Argonne National Laboratory who worked with a team of scientists from Japan, Finland, and Germany to take the "magic" out of the cement-to-metal transformation. Benmore and Shinji Kohara from Japan Synchrotron Radiation Research Institute/SPring-8 led the research effort.
This change demonstrates a unique way to make metallic-glass material, which has positive attributes including better resistance to corrosion than traditional metal, less brittleness than traditional glass, conductivity, low energy loss in magnetic fields, and fluidity for ease of processing and molding. Previously only metals have been able to transition to a metallic-glass form. Cement does this by a process called electron trapping, a phenomena only previously seen in ammonia solutions. Understanding how cement joined this exclusive club opens the possibility of turning other solid normally insulating materials into room-temperature semiconductors.
"This phenomenon of trapping electrons and turning liquid cement into liquid metal was found recently, but not explained in detail until now," Benmore said. "Now that we know the conditions needed to create trapped electrons in materials we can develop and test other materials to find out if we can make them conduct electricity in this way."
The results were reported May 27 in the journal the Proceeding of the National Academy of Sciences in the article "Network topology for the formation of solvated electrons in binary CaO–Al2O3 composition glasses".
The team of scientists studied mayenite, a component of alumina cement made of calcium and aluminum oxides. They melted it at temperatures of 2,000 degrees Celsius using an aerodynamic levitator with carbon dioxide laser beam heating. The material was processed in different atmospheres to control the way that oxygen bonds in the resulting glass. The levitator keeps the hot liquid from touching any container surfaces and forming crystals. This let the liquid cool into glassy state that can trap electrons in the way needed for electronic conduction. The levitation method was developed specifically for in-situ measurement at Argonne's Advanced Photon Source by a team led by Benmore.
The scientists discovered that the conductivity was created when the free electrons were "trapped" in the cage-like structures that form in the glass. The trapped of electrons provided a mechanism for conductivity similar to the mechanism that occurs in metals.
To uncover the details of this process, scientists combined several experimental techniques and analyzed them using a supercomputer. They confirmed the ideas in experiments using different X-ray techniques at Spring 8 in Japan combined with earlier measurements at the Intense Pulsed Neutron Source and the Advanced Photon Source.
Research was supported by the Ministry of Education, Culture, Sports, Science, and Technology of Japan, the Japan Science and Technology Agency, and the Academy of Finland.
The research team also included Richard Weber from Materials Development, Inc. and the APS; Jaakko Akola from Tampere University of Technology, Aalto University and Forschungszentrum Jülich; Koji Ohara, Akihiko Fujiwara, Kiyofumi Nitta, and Tomoya Uruga from Japan Synchrotron Radiation Research Institute/SPring-8; Yasuhiro Watanabe and Atsunobu Masuno from The University of Tokyo; Takeshi Usuki from Yamagata University; and Takashi Kubo and Atsushi Nakahira from Osaka Prefecture University.
The Advanced Photon Source at Argonne National Laboratory is one of five national synchrotron radiation light sources supported by the U.S. Department of Energy's Office of Science to carry out applied and basic research to understand, predict, and ultimately control matter and energy at the electronic, atomic, and molecular levels, provide the foundations for new energy technologies, and support DOE missions in energy, environment, and national security. To learn more about the Office of Science X-ray user facilities, visit the Office of Science website.
Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation's first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America's scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy's Office of Science.
Tona Kunz | EurekAlert!
Further reports about: > Advanced Investigator Grant > Advanced Photon Source > Photon > Photon Source > Radiation > Synchrotron > X-ray microscopy > cement-to-metal transformation > information technology > insulating material > insulating materials > light source > liquid metal > magnetic field > metallic-glass form
Physics, photosynthesis and solar cells
01.12.2016 | University of California - Riverside
New process produces hydrogen at much lower temperature
01.12.2016 | Waseda University
A multi-institutional research collaboration has created a novel approach for fabricating three-dimensional micro-optics through the shape-defined formation of porous silicon (PSi), with broad impacts in integrated optoelectronics, imaging, and photovoltaics.
Working with colleagues at Stanford and The Dow Chemical Company, researchers at the University of Illinois at Urbana-Champaign fabricated 3-D birefringent...
In experiments with magnetic atoms conducted at extremely low temperatures, scientists have demonstrated a unique phase of matter: The atoms form a new type of quantum liquid or quantum droplet state. These so called quantum droplets may preserve their form in absence of external confinement because of quantum effects. The joint team of experimental physicists from Innsbruck and theoretical physicists from Hannover report on their findings in the journal Physical Review X.
“Our Quantum droplets are in the gas phase but they still drop like a rock,” explains experimental physicist Francesca Ferlaino when talking about the...
The Max Planck Institute for Physics (MPP) is opening up a new research field. A workshop from November 21 - 22, 2016 will mark the start of activities for an innovative axion experiment. Axions are still only purely hypothetical particles. Their detection could solve two fundamental problems in particle physics: What dark matter consists of and why it has not yet been possible to directly observe a CP violation for the strong interaction.
The “MADMAX” project is the MPP’s commitment to axion research. Axions are so far only a theoretical prediction and are difficult to detect: on the one hand,...
Broadband rotational spectroscopy unravels structural reshaping of isolated molecules in the gas phase to accommodate water
In two recent publications in the Journal of Chemical Physics and in the Journal of Physical Chemistry Letters, researchers around Melanie Schnell from the Max...
The efficiency of power electronic systems is not solely dependent on electrical efficiency but also on weight, for example, in mobile systems. When the weight of relevant components and devices in airplanes, for instance, is reduced, fuel savings can be achieved and correspondingly greenhouse gas emissions decreased. New materials and components based on gallium nitride (GaN) can help to reduce weight and increase the efficiency. With these new materials, power electronic switches can be operated at higher switching frequency, resulting in higher power density and lower material costs.
Researchers at the Fraunhofer Institute for Solar Energy Systems ISE together with partners have investigated how these materials can be used to make power...
16.11.2016 | Event News
01.11.2016 | Event News
14.10.2016 | Event News
02.12.2016 | Medical Engineering
02.12.2016 | Agricultural and Forestry Science
02.12.2016 | Physics and Astronomy