As airplanes fly through clouds of super-cooled water droplets, areas around the nose, the leading edges of the wings, and the engine cones experience low airflow, says Hirotaka Sakaue, a researcher in the fluid dynamics group at the Japan Aerospace Exploration Agency (JAXA).
This enables water droplets to contact the aircraft and form an icy layer. If ice builds up on the wings it can change the way air flows over them, hindering control and potentially making the airplane stall. Other members of the research team are with the University of Tokyo, the Kanagawa Institute of Technology, and Chuo University.
Current anti-icing techniques include diverting hot air from the engines to the wings, preventing ice from forming in the first place, and inflatable membranes known as pneumatic boots, which crack ice off the leading edge of an aircraft’s wings. The super-hydrophobic, or water repelling, coating being developed by Sakaue, Katsuaki Morita – a graduate student at the University of Tokyo – and their colleagues works differently, by preventing the water from sticking to the airplane’s surface in the first place.
The researchers developed a coating containing microscopic particles of a Teflon-based material called polytetrafluoroethylene (PTFE), which reduces the energy needed to detach a drop of water from a surface. “If this energy is small, the droplet is easy to remove,” says Sakaue. “In other words, it’s repelled,” he adds.
The PTFE microscale particles created a rough surface, and the rougher it is, on a microscopic scale, the less energy it takes to detach water from that surface. The researchers varied the size of the PTFE particles in their coatings, from 5 to 30 micrometers, in order to find the most water-repellant size. By measuring the contact angle – the angle between the coating and the drop of water – they could determine how well a surface repelled water.
The team will present their findings in a poster session at the American Physical Society’s (APS) Division of Fluid Dynamics (DFD) meeting, which will take place Nov. 18 – 22, 2012, at the San Diego Convention Center in San Diego, California.
The poster, “Effect of PTFE Particle on Super-Hydrophobic Coating for Anti-Icing” will be discussed at 5:50 p.m. on Sunday, Nov. 18 in Ballroom 20D Foyer.
Abstract: http://meeting.aps.org/Meeting/DFD12/Event/177678MORE MEETING INFORMATION
Selected entries from the Gallery of Fluid Motion will be hosted as part of the Fluid Dynamics Virtual Press Room. In mid-November, when the Virtual Press Room is launched, another announcement will be sent out.
This release was prepared by the American Institute of Physics (AIP) on behalf of the American Physical Society’s (APS) Division of Fluid Dynamics (DFD).ABOUT THE APS DIVISION OF FLUID DYNAMICS
Charles Blue | Newswise Science News
Researchers invent process to make sustainable rubber, plastics
25.04.2017 | University of Delaware
Nanoimprinted hyperlens array: Paving the way for practical super-resolution imaging
24.04.2017 | Pohang University of Science & Technology (POSTECH)
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
20.04.2017 | Event News
18.04.2017 | Event News
03.04.2017 | Event News
26.04.2017 | Earth Sciences
26.04.2017 | Health and Medicine
25.04.2017 | Physics and Astronomy