The studies, totaling nearly 200 pages, examine seven critical topics related to the use of hydraulic fracturing in Michigan, with an emphasis on high-volume methods: technology, geology and hydrogeology, environment and ecology, public health, policy and law, economics, and public perceptions.
While considerable natural gas reserves are believed to exist in the state and high-volume hydraulic fracturing has the potential to help access them, possible impacts to the environment and to public health must be addressed, the U-M researchers concluded.
Though modern high-volume hydraulic fracturing is not widely used in Michigan today, a main premise of the U-M study is that the technique could become more widespread due to a desire for job creation, economic growth, energy independence and cleaner fuels.
"There's a lot of interest in high-volume hydraulic fracturing, but there really isn't much activity at the moment in Michigan," said John Callewaert, project director and director of integrated assessment at U-M's Graham Sustainability Institute, which is overseeing the project. "That's why now is a good time to do this assessment."
These reports conclude the first phase of a two-year U-M project known formally as the Hydraulic Fracturing in Michigan Integrated Assessment. The seven documents—which should not be characterized or cited as final products of the integrated assessment—provide a solid informational foundation for the project's next phase, an analysis of various hydraulic fracturing policy options. That analysis is expected to be completed in mid-2014 and will be shared with government officials, industry experts, other academics, advocacy groups and the general public.
"Nothing like this has been done before in Michigan," Callewaert said. "Having this comprehensive, state-specific set of reports will be an invaluable resource that will help guide future decision-making on this issue—and hopefully will help Michigan avoid some of the pitfalls encountered in other states."
Conclusions of the reports, which were written by faculty-led, student-staffed teams from various disciplines, include:
• Technology. In view of the current low price of natural gas, the high cost of drilling deep shale formations and the absence of new oil discoveries, it is unlikely that there will be significant growth of the oil and gas industry in Michigan in the near-term future. However, considerable reserves of natural gas are believed to exist in deep shale formations such as the Utica-Collingwood, which underlies much of Michigan and eastern Lake Huron and extends into Ontario, Canada.
• Geology/hydrogeology. A recent flurry of mineral rights acquisitions in the state associated with exploratory drilling suggests the potential for growth in natural gas production through high-volume hydraulic fracturing, though only a handful of such wells have been drilled to date. "Michigan is thus in a unique position to assess the future of high-volume hydraulic fracturing before the gas boom begins."
• Environment/ecology. Potential impacts of hydraulic fracturing on the environment are significant and include increased erosion and sedimentation, increased risk of aquatic contamination from chemical spills or equipment runoff, habitat fragmentation and resulting impacts on aquatic and terrestrial organisms, loss of stream riparian zones, and reduction of surface waters available to plants and animals due to the lowering of groundwater levels.
• Public health. Possible hazards in the surrounding environment include impaired local and regional air quality, water pollution and degradation of ecosystems. Possible hazards in nearby communities include increased traffic and motor vehicle accidents, stress related to risk perception among residents, and boomtown-associated effects such as a strained health care system and road degradation.
• Policy/law. The state is the primary source of law and policy governing hydraulic fracturing in Michigan. The operator of a high-volume hydraulically fractured well must disclose the hazardous constituents of chemical additives to the state Department of Environmental Quality for each additive within 60 days of well completion. Unlike most other states, DEQ does not require operators to report to FracFocus.org, a nationwide chemical disclosure registry.
• Economics. The gas extraction industry creates employment and income for Michigan, but the employment effects are modest compared with other industries and not large enough to "make or break" the state's economy. In the future, the number of technical jobs in the industry will likely increase, while less-skilled laborer positions will decline.
• Public perceptions. A slight majority of Michigan residents believe the benefits of fracking outweigh the risks, but significant concerns remain about the potential impacts to human health, the environment and groundwater quality. The public tends to view the word "fracking" as the entirety of the natural gas development process, from leasing and permitting, to drilling and well completion, to transporting and storing wastewater and chemicals. Industry and regulatory agencies hold a much narrower definition that is limited to the process of injecting hydraulic fracturing fluids into a well. These differences in perceived meaning can lead to miscommunications that ultimately increase mistrust among stakeholders.
In fracking, water, sand and chemicals (in a mix known as hydraulic fracturing fluid) are injected under high pressure deep underground to crack sedimentary rocks, such as shale, and free trapped natural gas or oil. Though the process has been used for more than half a century to improve well production, recent technical advances have helped unlock vast stores of previously inaccessible natural gas and oil, resulting in a boom in some parts of the United States.Chief among the technical advances are directional drilling and high-volume hydraulic fracturing, which are often used together. In directional drilling, the well operator bores vertically down to the rock formation, then follows the formation horizontally.
High-volume fracking—the focus of recent attention and public concern—is defined by the state of Michigan as a well that uses more than 100,000 gallons of hydraulic fracturing fluid. For reference, an Olympic-size swimming pool holds about 660,000 gallons of water.
Since the late 1940s, an estimated 12,000 gas and oil wells have been drilled in Michigan using hydraulic fracturing, without any reported contamination issues. Most of those wells have been relatively shallow vertical wells that each used about 50,000 gallons of water.
But recently, a small number of deep, directionally drilled, high-volume hydraulically fractured wells have been completed in the northern part of the Lower Peninsula. Those wells sometimes use several million gallons of water, and one Michigan well required more than 20 million gallons.
Since 2010, when the Petoskey Pioneer Well spurred interest in high-volume hydraulically fractured wells in Michigan, 19 such wells are known to have been completed in the state, according to Sara Gosman, a lecturer at the U-M Law School and author of the technical report on policy/law.
In the public perceptions report, authors Kim Wolske and Andrew Hoffman of the U-M Erb Institute for Global Sustainable Enterprise note that chemical additives in high-volume hydraulic fracturing fluids "remain a primary point of contention for many stakeholders in Michigan." Many nonprofits and concerned citizens stress the point that operators of high-volume wells are not required to report the composition of those fluids to the state until 60 days after the hydraulic fracturing event.
The often-repeated concern is that if a spill were to occur, responders would not be as well-prepared as they would have been if the fluid composition had been known beforehand, Wolske and Hoffman note.Though groundwater contamination is often cited as a top concern, surface contamination from spills and improper disposal of waste fluids likely carries the greatest risk for harmful water-quality impacts, due to proximity to potable water resources, according to the geology/
hydrogeology report written by Brian Ellis, assistant professor in the Department of Civil and Environmental Engineering.
When a well is fracked, the fluid is injected into rock formations to create cracks and to prop them open. Of the total volume of hydraulic fracturing fluids injected into a well, amounts varying from 10 percent to 70 percent may return to the surface as "flowback water" after the pressure is reduced and gas or oil begin to flow toward the wellhead.
In Michigan high-volume hydraulically fractured wells, the average amount of flowback water returning to the surface is about 37 percent of injected volumes, according to the Ellis report.
The flowback water is highly saline and can contain elevated levels of heavy metals and naturally occurring radioactive elements, in addition to methane and the original chemical additives in the fracturing fluids. In Michigan, common hydraulic fracturing fluid additives include ethylene glycol, hydrochloric acid, isopropyl alcohol, methanol and ammonium persulfate, according to the Ellis report.
"However, since in Michigan all flowback is disposed of by deep-well injection and it is not allowed to sit in open pits, the risk of this type of contamination will be lower than in other states without such disposal opportunities and regulations," Ellis wrote.
On the topic of potential water contamination, the environment/ecology report notes that Michigan's dense, interconnected aquatic ecosystems (streams, rivers, lakes, inland and coastal wetlands) and the groundwater aquifers to which they are linked are of particular concern. The connectivity between surface and groundwater bodies "can lead to impacts distant from, as well as close to, drilling sites," according to the report by G. Allen Burton, professor in the School of Natural Resources and Environment and director of the U-M Water Center, and Knute Nadelhoffer, professor of ecology and evolutionary biology and director of the U-M Biological Station.
The potential migration of methane, the main component of natural gas, into groundwater reservoirs has also received a lot of attention lately.
But the probability of significant methane leakage associated with deep-shale drilling involving hydraulic fracturing in Michigan "is quite low provided that best practices are adhered to," according to the U-M report on hydraulic fracturing technologies written by John Wilson, a consultant to the U-M Energy Institute, and Johannes Schwank, professor of chemical engineering.
The greatest challenge to understanding the potential public health risks of hydraulic fracturing in Michigan is the lack of state-specific data, according to Niladri Basu, author of the public health technical report and a former faculty member at the U-M School of Public Health. While thousands of hydraulically fractured wells have been drilled in Michigan, the potential public health risks related to these facilities have been poorly documented, Basu wrote.
For example, while operators of high-volume fracking wells are required to disclose the contents of their hydraulic fracturing fluids, operators of the 12,000 or so low-volume wells in the state are not. "There needs to be much greater understanding of what chemicals are being used in every well, with information related to volumes, amounts, disposal plans, etc., made available," Basu wrote.
The U-M hydraulic fracturing study is expected to cost at least $600,000 and is being funded by U-M through its Graham Sustainability Institute, Energy Institute and Risk Science Center. State regulators, oil and gas industry representatives, staffers from environmental nonprofits, and peer reviewers provided input to the technical reports, and more than 100 public comments were considered.
In addition to the study authors mentioned above, the technical report authors include Roland Zullo, assistant research scientist, U-M Institute for Research on Labor, Employment and the Economy (economics report).
Please note that public comments will not be used to revise the technical reports. Rather, submitted comments will be used with the technical reports to inform the integrated assessment to be completed during the second phase of the project.
ET Oct. 7, 2013. A free webinar for the general public will be held Monday, Sept. 9, noon-12:30 p.m. ET. To register, visit https://attendee.gotowebinar.com/register/3390032195656711680.
Jim Erickson | Newswise
Do microplastics harbour additional risks by colonization with harmful bacteria?
05.04.2018 | Leibniz-Institut für Ostseeforschung Warnemünde
Rutgers-led innovation could spur faster, cheaper, nano-based manufacturing
14.02.2018 | Rutgers University
University of Connecticut researchers have created a biodegradable composite made of silk fibers that can be used to repair broken load-bearing bones without the complications sometimes presented by other materials.
Repairing major load-bearing bones such as those in the leg can be a long and uncomfortable process.
Study published in the journal ACS Applied Materials & Interfaces is the outcome of an international effort that included teams from Dresden and Berlin in Germany, and the US.
Scientists at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) together with colleagues from the Helmholtz-Zentrum Berlin (HZB) and the University of Virginia...
Novel highly efficient and brilliant gamma-ray source: Based on model calculations, physicists of the Max PIanck Institute for Nuclear Physics in Heidelberg propose a novel method for an efficient high-brilliance gamma-ray source. A giant collimated gamma-ray pulse is generated from the interaction of a dense ultra-relativistic electron beam with a thin solid conductor. Energetic gamma-rays are copiously produced as the electron beam splits into filaments while propagating across the conductor. The resulting gamma-ray energy and flux enable novel experiments in nuclear and fundamental physics.
The typical wavelength of light interacting with an object of the microcosm scales with the size of this object. For atoms, this ranges from visible light to...
Stable joint cartilage can be produced from adult stem cells originating from bone marrow. This is made possible by inducing specific molecular processes occurring during embryonic cartilage formation, as researchers from the University and University Hospital of Basel report in the scientific journal PNAS.
Certain mesenchymal stem/stromal cells from the bone marrow of adults are considered extremely promising for skeletal tissue regeneration. These adult stem...
In the fight against cancer, scientists are developing new drugs to hit tumor cells at so far unused weak points. Such a “sore spot” is the protein complex...
13.04.2018 | Event News
12.04.2018 | Event News
09.04.2018 | Event News
20.04.2018 | Physics and Astronomy
20.04.2018 | Interdisciplinary Research
20.04.2018 | Physics and Astronomy