Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Study shows statin use before or after stroke improves recovery

13.04.2005


The use of statins before or after a stroke helps improve patient recovery after an ischemic stroke, according to research that will be presented at the American Academy of Neurology 57th Annual Meeting in Miami Beach, Fla., April 9 – 16, 2005.
Patients on statins before a stroke were 1.6 times more likely to have a favorable outcome compared to patients never exposed to statins, according to the study. Those on statins after a stroke were 2.6 times more likely to have a favorable outcome than those not on statins. "These results are very exciting and suggest that, unless contradicted, all patients at risk for ischemic stroke or recurrent ischemic stroke should probably be treated with statins to reduce their LDL levels to 60-70mg/dl," said study author Majaz Moonis, MD, MCRPI, DM, of the University of Massachusetts Medical School and director of the Stroke Prevention Clinic at UMass Memorial Medical Center.

The study examined 1,618 people who experienced ischemic stroke to assess whether use of statins before or after stroke onset improved their outcomes. "Our research was based on the data that stroke patients had evidence of inflammation by elevated C-reactive protein levels. Statins reduce C-reactive protein, improve the endothelium, and have an anti-clotting effect," said Moonis. "Given these properties of statins, it seemed reasonable to assume that statins would improve the outcome after stroke."


The results of the study were not influenced by the severity of the stroke which, along with post-stroke complications and prior cerebrovascular disease, were independent predictors of an unfavorable outcome. This preliminary finding requires further research to confirm the results, according to the study authors.

Marilee Reu | EurekAlert!
Further information:
http://www.aan.com

More articles from Studies and Analyses:

nachricht Real-time feedback helps save energy and water
08.02.2017 | Otto-Friedrich-Universität Bamberg

nachricht The Great Unknown: Risk-Taking Behavior in Adolescents
19.01.2017 | Max-Planck-Institut für Bildungsforschung

All articles from Studies and Analyses >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

New pop-up strategy inspired by cuts, not folds

27.02.2017 | Materials Sciences

Sandia uses confined nanoparticles to improve hydrogen storage materials performance

27.02.2017 | Interdisciplinary Research

Decoding the genome's cryptic language

27.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>