Kansas State University researchers are discovering the challenges aging creates for drivers.
To help improve traffic safety, K-State engineers identified the characteristics of older drivers in Kansas and the types of crashes they are involved in. Their research found most car accidents involving older drivers occur during the daytime and are more severe, often ending in injury or fatality, than those for younger populations.
With this knowledge, the researchers will follow up with a study to learn what changes can be made to improve these difficulties for older drivers. The focus will be on countermeasures to reduce the number of crashes involving older drivers and the severity of the crashes.
"Highway safety of older drivers is an issue," said Sunanda Dissanayake, K-State associate professor of civil engineering. "If you live in an area like Kansas, there's not much public transportation, so drivers have to rely on a personal vehicle. The older population should be able to drive. It's a significant predictor of their quality of life."
Dissanayake started the project, which is funded by the Kansas Department of Transportation, in 2008 with Loshaka Perera, a former K-State graduate student in civil engineering. Dissanayake presented the research in March at the Institute of Transportation Engineers Annual Meeting
For the study, older drivers were defined as people 65 years and older. The researchers analyzed Kansas crash data from 1997 to 2006, which included crashes based on involvement and severity. The data were analyzed and compared among drivers aged 15 to 25, drivers aged 25 to 65, and older drivers.
"If you look at the number of total crashes in Kansas involving older drivers, it's not that much. That's because they don't drive as much as the rest of the population," Dissanayake said. "But if you look at crash involvement per mile driven, that's very high for older drivers."
The crash analysis showed that the severity of crashes for older drivers also is very high compared to the rest of the population. When looking at the categories of crash severity, older drivers have the highest incidents in fatal crashes, as well as incapacitating and non-incapacitating crashes. Older drivers also had a higher percentage of crashes occurring at intersections and accidents happening during daylight.
"That doesn't necessarily mean it's more dangerous during daytime," Dissanayake said. "It could be because older drivers do most of their driving during the daylight hours."
Most of the older-driver crashes involved colliding with another vehicle while in traffic. Few involved running off the road and hitting something, which is more common for young drivers, Dissanayake said. Right before their crashes, most of the older drivers were driving straight ahead, but a significant amount were making a left turn. Dissanayake said making a left turn is especially difficult when there is no green arrow, leaving the maneuver to the driver's judgment.
The study also identified the personal opinions and experiences of older drivers. The researchers distributed a survey for older drivers around Kansas at places like senior centers, retirement communities and churches. The results showed that more than 92 percent of the participants had more than 50 years of driving experience. Most of them reported driving cars, and 41 percent said they drove every day. However, the majority of older drivers said they drove less than 100 miles per month. The survey also showed that 65 percent of participants had never taken a driver education course, and 18 percent of the participants were involved in a crash in the last 10 years.
The survey also asked questions regarding the drivers' perceptions of the difficulties for different driving conditions. The participants said they don't mind driving in windy or rainy conditions, though they try to avoid driving in snow. Men reported to be more wiling to drive in bad weather compared to women.
Only 38 percent of the drivers said they are likely to drive during the night, and 39 percent said they are likely to drive on freeways. Participants also answered questions regarding factors of driving that have become more difficult as they have gotten older.
"One of the most difficult things for them is identifying the speed and distance of oncoming traffic," Dissanayake said. "This is important for making a left turn, and looking at the crash data, we see a lot of left-turn crashes."
The participants also said they have difficulty and feel less comfortable making sudden, unexpected stops while driving, as well as merging and changing lanes. Fifty percent said they would like to avoid high-traffic roads, as well as freeways and two-lane undivided highways.
One of the challenging situations that could be improved is the safety at intersections, Dissanayake said.
"In areas where there are more older drivers, I think we should always look at the possibility of having the green arrow indication at left turns," Dissanayake said. "Additionally, for driver education perhaps we need to have a closer look at the driver license renewal process, such as its frequency and what is covered."
She said the fonts and sizes of road signs also could be further improved to ensure older driver safety.
"As the older population gradually increases in the United States, so will the number of older drivers," Dissanayake said. "We need to be taking steps to improve their safety while driving, which also would be beneficial to all road users."
Sunanda Dissanayake, 785-532-1540, firstname.lastname@example.org
Sunanda Dissanayake | Newswise Science News
New study: How does Europe become a leading player for software and IT services?
03.04.2017 | Fraunhofer-Institut für System- und Innovationsforschung (ISI)
Reusable carbon nanotubes could be the water filter of the future, says RIT study
30.03.2017 | Rochester Institute of Technology
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
28.04.2017 | Event News
20.04.2017 | Event News
18.04.2017 | Event News
28.04.2017 | Medical Engineering
28.04.2017 | Earth Sciences
28.04.2017 | Life Sciences