Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Consumers Willing to Pay More for Products They Touch

09.01.2009
Consumers are often told that if they break an item, they buy it. But a new study suggests that if they just touch an item for more than a few seconds, they may also end up buying it.

Researchers from Ohio State University and Illinois State University tested how touching an item before buying affects how much they are willing to pay for an item. A simple experiment with an inexpensive coffee mug revealed that in many cases, simply touching the coffee mug for a few seconds created an attachment that led people to pay more for the item.

The results, which were published recently in the journal Judgment and Decision Making, found that people become personally attached to the mug within the first 30 seconds of contact.

People who held the coffee mug longer than a few seconds seemed not only more compelled to outbid others in an auction setting, but they were also more willing to bid more than the retail price for that item.

“The amazing part of this study is that people can become almost immediately attached to something as insignificant as a mug,” said lead author of the study James Wolf, who started the work while he was a doctoral student at Ohio State.

“By simply touching the mug and feeling it in their hands, many people begin to feel like the mug is, in fact, their mug. Once they begin to feel it is theirs, they are willing to go to greater lengths to keep it.”

Previous research had documented that many people begin to feel ownership of an item long before they actually acquire it. But this is the first study to demonstrate that strong feelings of ownership can begin in as little as 30 seconds after initial contact, said Wolf, who is now an assistant professor of information systems at Illinois State University.

To explain how touch can affect a person’s valuation of an object, the researchers tested 144 people at a large university. People were asked to bid on mugs in either an open or closed auction after inspecting a coffee mug firsthand for various lengths of time.

Participants were given the mug at the beginning of both experiments. People in the short-duration treatments were asked to inspect a coffee mug for 10 seconds, while those in the longer treatments were asked to inspect it for 30 seconds.

After inspection, they were asked to bid on the mug. Those in closed auctions were asked to write down their maximum bid on a piece of paper for a mug worth $3.95 at the nearby university bookstore. They then flipped the paper over so no one could see their bid during the auction.

Those in the open auctions, on the other hand, were allowed to see other bids. Participants in open auctions placed their bids for a mug worth $4.95 through a computer-based auction similar to eBay, where they could see the current high bid and time remaining in the auction.

The open auctions had “soft” ending times, meaning the length of the auction was extended every time a bid was placed in the last 15 seconds of the auction. Soft ending times were used to reduce the effects of last-second bidding.

All participants were told the retail value of the coffee mug before the auction began. They were also informed that several identical mugs were available for purchase at the campus bookstore adjacent to the testing location.

All participants received $10 for participating in the experiment; they were told that the winning bidders would have their bid amount taken out of their payment if they agreed.

The results showed that people who held the item for 30 seconds bid significantly higher than people who touched the mug for 10 seconds. The average bid in the open auctions was $2.44 for people who touched the mug for 10 seconds and $3.91 for those in the 30 second experiments. This finding was also consistent for those in silent auctions, with people in the 10 and 30 second experiments bidding $2.24 and $3.07, respectively.

The higher bids were particularly significant given the fact that the researchers used seemingly insignificant, inexpensive mugs, said co-author Hal Arkes.

“We took the most minimal type of attachment; not a new car or a suit, but a mug. And we found significant differences in consumer valuations that begin in a matter of seconds,” said Arkes, who is a professor emeritus of psychology at Ohio State.

Those differences continued when the researchers looked at how often the winning bid exceeded the retail price of the mug.

All participants were told the price of the mug before bidding started. But people who held their mug for 30 seconds bid more than the retail price four out of seven times. Although the mugs were valued at $4.49, bids went as high as $10 on two different occasions for those in longer duration experiments.

In contrast, the winning bid for people in the 10 second group exceeded the retail price only once.

Co-author Waleed Muhanna, who is an associate professor of management information systems at Ohio State, said the tendency for participants who held the mugs longer to bid over the retail price may come down to the strength of their attachment.

“The strength of this attachment seems to increase with greater physical contact. And one explanation is loss aversion; that is, the longer people have an object, the stronger their attachment and their eagerness to keep it. People become attached and they are willing to pay much more to avoid losing that object,” Muhanna said.

While this research may help researchers understand the buying behaviors of consumers, many retailers have been using the try-then-buy tactic for years, Wolf said. Car dealers often tell people to drive cars home and pet stores encourage shoppers to play with puppies because they know the attachment makes consumers more willing to buy their products.

But Wolf said understanding this attachment may help buyers make smarter decisions.

“When you sit behind the wheel of a new car, you know you’re going to value it more and possibly be ready to pay more. But by going in there knowing that you are going to feel like raising your price, maybe you can be better prepared not to make a hasty purchase that you’ll regret later on,” he said.

The study was partially funded by Ohio State’s Jensen-Wallin-Young Fund and by Illinois State’s Caterpillar Scholars Fund.

James Wolf | Newswise Science News
Further information:
http://www.osu.edu

More articles from Studies and Analyses:

nachricht Real-time feedback helps save energy and water
08.02.2017 | Otto-Friedrich-Universität Bamberg

nachricht The Great Unknown: Risk-Taking Behavior in Adolescents
19.01.2017 | Max-Planck-Institut für Bildungsforschung

All articles from Studies and Analyses >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

From rocks in Colorado, evidence of a 'chaotic solar system'

23.02.2017 | Physics and Astronomy

'Quartz' crystals at the Earth's core power its magnetic field

23.02.2017 | Earth Sciences

Antimicrobial substances identified in Komodo dragon blood

23.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>